| Pipe Size | Dimension (in) | Approx. Weight (lb) | ||||
|---|---|---|---|---|---|---|
| R | A | B | MJ x MJ | MJ x PE | MJ x FLG | |
| * 2 | 2.25 | 3.25 | – | 16 | – | – |
| 3 | 4.0 | 5.5 | 13.5 | 26 | 36 | – |
| 4 | 4.5 | 6.5 | 14.5 | 56 | 53 | 51 |
| 6 | 6.0 | 8.0 | 16.0 | 88 | 80 | 75 |
| 8 | 7.0 | 9.0 | 17.0 | 123 | 119 | 118 |
| 10 | 9.0 | 11.0 | 19.0 | 189 | 181 | 168 |
| 12 | 10.0 | 12.0 | 20.0 | 268 | 252 | 288 |
| 14 | 11.5 | 14.0 | 22.0 | 380 | – | – |
| 16 | 12.5 | 15.0 | 23.0 | 552 | 470 | 465 |
| 18 | 14.0 | 16.5 | 24.5 | 625 | 600 | 577 |
| 20 | 15.5 | 18.0 | 26.0 | 862 | 775 | – |
| 24 | 18.5 | 22.0 | 30.0 | 1423 | 1301 | 1150 |
| 30 | 21.5 | 25.0 | 33.0 | 1942 | 1920 | – |
| 36 | 24.5 | 28.0 | 36.0 | 2629 | 2310 | – |
| 42 | 27.5 | 31.0 | – | 3410 | – | – |
| 48 | 30.5 | 34.0 | – | 4595 | – | – |
- * These fittings are not included in AWWA C110/A21.10
- For flange dimensions see Flange – ANSI Class 125, C110, DI
- AWWA C110/A21.10 – Ductile-Iron and Gray-Iron Fittings (3″ to 48″)
- ASME B16.1 – Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
- AWWA C104/A21.4 – Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
- AWWA C111/A21.11 – Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
- Ductile iron mechanical joint fittings 3″ through 24″ shall be rated for 350 PSI working pressure.
- Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
- MJ – mechanical joint
- PE – plain end
- FLG – flange