| Pipe Size | Dimension (in) | Approx. Weight (lb) | |
|---|---|---|---|
| H | Max. Tap | ||
| 3 | 8 | 2 | 40 |
| 4 | 8 | 2 | 50 |
| 6 | 8 | 2 | 75 |
| 8 | 8 | 2 | 105 |
| 10 | 8 | 2 | 130 |
| 12 | 8 | 2 | 180 |
- AWWA C110/A21.10 – Ductile-Iron and Gray-Iron Fittings (3″ to 48″)
- ASME B16.1 – Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
- AWWA C104/A21.4 – Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
- AWWA C111/A21.11 – Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
- Ductile iron mechanical joint fittings 3″ through 24″ shall be rated for 350 PSI working pressure.
- Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
- MJ – mechanical joint