| Pipe Size | Dimensions (in) | Approx. Weight (lb) | ||||
|---|---|---|---|---|---|---|
| Run | Branch | J | K | MJ | * MJ x FLG | |
| 6 | 6 | 8.0 | 8.0 | 160 | 141 | |
| 8 | 4 | 9.0 | 9.0 | 185 | – | |
| 8 | 6 | 9.0 | 9.0 | 205 | 182 | |
| 8 | 8 | 9.0 | 9.0 | 255 | 245 | |
| 10 | 6 | 11.0 | 10.0 | 285 | – | |
| 10 | 8 | 11.0 | 11.0 | 310 | – | |
| 10 | 10 | 11.0 | 11.0 | 380 | 360 | |
| 12 | 6 | 12.0 | 12.0 | 361 | 367 | |
| 12 | 8 | 12.0 | 12.0 | 371 | 373 | |
| 12 | 12 | 12.0 | 12.0 | 486 | 487 | |
| 14 | 8 | 14.0 | 14.0 | 550 | – | |
| 14 | 14 | 14.0 | 14.0 | 779 | – | |
| 16 | 6 | 15.0 | 15.0 | 650 | – | |
| 16 | 8 | 15.0 | 15.0 | 675 | 655 | |
| 16 | 16 | 15.0 | 15.0 | 895 | 875 | |
| 18 | 8 | 13.0 | 15.5 | 775 | – | |
| 18 | 10 | 13.0 | 15.5 | 760 | – | |
| 18 | 12 | 13.0 | 15.5 | 860 | – | |
| 18 | 18 | 16.5 | 16.5 | 1140 | – | |
| 20 | 8 | 14.0 | 17.0 | 951 | – | |
| 20 | 12 | 14.0 | 17.0 | 977 | – | |
| 20 | 16 | 18.0 | 18.0 | 1245 | – | |
| 20 | 20 | 18.0 | 18.0 | 1440 | – | |
| 24 | 8 | 15.0 | 19.0 | 1244 | – | |
| 24 | 12 | 15.0 | 19.0 | 1326 | – | |
| 24 | 16 | 15.0 | 19.0 | 1479 | – | |
| 24 | 20 | 22.0 | 22.0 | 1965 | – | |
| 24 | 24 | 22.0 | 22.0 | 2192 | – | |
| 30 | 6 | 18.0 | 23.0 | 2085 | – | |
| 30 | 12 | 18.0 | 23.0 | 2165 | – | |
| 30 | 24 | 25.0 | 25.0 | 3180 | – | |
| 30 | 30 | 25.0 | 25.0 | 3640 | – | |
| 36 | 24 | 20.0 | 26.0 | 2910 | – | |
| 36 | 36 | 28.0 | 28.0 | 4370 | – | |
| 42 | 42 | 31.0 | 31.0 | 7145 | – | |
| 48 | 24 | 26.0 | 34.0 | 5210 | – | |
| 48 | 36 | 34.0 | 34.0 | 6790 | – | |
| 48 | 48 | 34.0 | 34.0 | 9380 | – | |
- * These fittings are not included in AWWA C110/A21.10
- For flange dimensions see Flange – ANSI Class 125, C110, DI
- AWWA C110/A21.10 – Ductile-Iron and Gray-Iron Fittings (3″ to 48″)
- ASME B16.1 – Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
- AWWA C104/A21.4 – Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
- AWWA C111/A21.11 – Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
- Ductile iron mechanical joint fittings 3″ through 24″ shall be rated for 350 PSI working pressure.
- Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.
- MJ – mechanical joint
- PE – plain end
- FLG – flange