Standards

ASTM Standards – Search: D

  • D4 – 86(2010) Standard Test Method for Bitumen Content
  • D4-RUS – 86(2010) Стандартный метод определения содержания битума
  • D5/D5M – 13 Standard Test Method for Penetration of Bituminous Materials
  • D5/D5M-RUS – 13 Стандартный метод определения пенетрации битумных материалов
  • D6/D6M – 95(2011)e1 Standard Test Method for Loss on Heating of Oil and Asphaltic Compounds
  • D6/D6M-RUS – 95(2011)e1 Стандартный метод определения потерь при нагреве масла и асфальтных компаундов
  • D8 – 17c Standard Terminology Relating to Materials for Roads and Pavements
  • D9 – 12 Standard Terminology Relating to Wood and Wood-Based Products
  • D16 – 16 Standard Terminology for Paint, Related Coatings, Materials, and Applications
  • D20 – 03(2014) Standard Test Method for Distillation of Road Tars
  • D25 – 12(2017) Standard Specification for Round Timber Piles
  • D34 – 08(2014) Standard Guide for Chemical Analysis of White Pigments
  • D36/D36M – 14e1 Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
  • D36/D36M-RUS – 14e1 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ ТЕМПЕРАТУРЫ РАЗМЯГЧЕНИЯ БИТУМОВ (УСТАНОВКА «КОЛЬЦО И ШАР»)
  • D41/D41M – 11(2016) Standard Specification for Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing
  • D43/D43M – 00(2012)e1 Standard Specification for Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing
  • D49 – 83(2014) Standard Test Methods of Chemical Analysis of Red Lead
  • D50 – 90(2011) Standard Test Methods for Chemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Iron and Manganese
  • D56 – 16a Standard Test Method for Flash Point by Tag Closed Cup Tester
  • D56-RUS – 16a Стандартный метод определения температуры вспышки с помощью прибора «Таг» с закрытым тиглем
  • D56-SP – 16a Método de prueba estándar para determinación del punto de inflamación por medio de analizador Tag de vaso cerrado
  • D61 – 15 Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)
  • D69 – 12 Standard Test Methods for Friction Tapes
  • D70 – 17 Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)
  • D71 – 94(2015)e1 Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)
  • D75/D75M – 14 Standard Practice for Sampling Aggregates
  • D76/D76M – 11(2016) Standard Specification for Tensile Testing Machines for Textiles
  • D79 – 86(2014) Standard Specification for Zinc Oxide Pigments
  • D81 – 87(2014) Standard Specification for Basic Carbonate White Lead Pigment
  • D83 – 84(2014) Standard Specification for Red Lead Pigment
  • D85 – 05(2011) Standard Specification for Ochre Pigment
  • D86 – 17 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
  • D86-RUS – 17 Стандартный метод перегонки нефтепродуктов и жидких топлив при атмосферном давлении
  • D86-SP – 17 Método de prueba estándar para la destilación de productos derivados del petróleo y combustibles líquidos a presión atmosférica
  • D87 – 09(2014) Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
  • D87-RUS – 09(2014) Стандартный метод определения точки плавления нефтяного парафина (кривая охлаждения)
  • D88 – 07(2013) Standard Test Method for Saybolt Viscosity
  • D91 – 02(2017) Standard Test Method for Precipitation Number of Lubricating Oils
  • D92 – 16b Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
  • D92-RUS – 16b Стандартный метод определения температуры вспышки и температуры воспламенения нефтепродуктов в открытом тигле Кливленда
  • D92-SP – 16b Método de prueba estándar para determinación del punto de inflamación y de combustión según la prueba Cleveland de vaso abierto
  • D93 – 16a Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
  • D93-RUS – 16a Стандартные методы определения температуры вспышки в закрытом тигле Пенски-Мартенса
  • D93-SP – 16a Método de prueba estándar para determinación del punto de inflamación por medio de analizador Pensky-Martens de vaso cerrado
  • D94 – 07(2017) Standard Test Methods for Saponification Number of Petroleum Products
  • D94-RUS – 07(2017) СТАНДАРТНЫЕ МЕТОДЫ ОПРЕДЕЛЕНИЯ ПОКАЗАТЕЛЯ ОМЫЛЕНИЯ НЕФТЕПРОДУКТОВ
  • D95 – 13e1 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
  • D95-RUS – 13e1 Стандартный метод определения содержания воды в нефтепродуктах и битуминых материалах с помощью перегонки
  • D95-SP – 13e1 Método de prueba estándar para agua en productos derivados del petróleo y materiales bituminosos por destilación
  • D97 – 17b Standard Test Method for Pour Point of Petroleum Products
  • D98 – 15 Standard Specification for Calcium Chloride
  • D113 – 17 Standard Test Method for Ductility of Asphalt Materials
  • D115 – 17 Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation
  • D116 – 86(2016) Standard Test Methods for Vitrified Ceramic Materials for Electrical Applications
  • D117 – 10 Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Oils of Petroleum Origin
  • D120 – 14a Standard Specification for Rubber Insulating Gloves
  • D121 – 15 Standard Terminology of Coal and Coke
  • D123 – 17 Standard Terminology Relating to Textiles
  • D126 – 87(2012) Standard Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green
  • D127 – 08(2015) Standard Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum
  • D127-RUS – 08(2015) Стандартный метод определения точки каплеобразования при плавлении нефтяного парафина, включая петролатум
  • D128 – 98(2014)e1 Standard Test Methods for Analysis of Lubricating Grease
  • D128-RUS – 98(2014)e1 Стандартные методы анализа консистентной смазки
  • D129 – 13 Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method)
  • D130 – 12 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
  • D130-RUS – 12 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ КОРРОЗИОННОЙ АГРЕССИВНОСТИ НЕФТЕПРОДУКТОВ (ПРОБА НА МЕДНУЮ ПЛАСТИНКУ)
  • D130-SP – 12 Método de prueba estándar para la corrosividad de productos derivados del petróleo sobre el cobre mediante prueba con tira de cobre1
  • D139 – 16 Standard Test Method for Float Test for Bituminous Materials
  • D140/D140M – 16 Standard Practice for Sampling Asphalt Materials
  • D140/D140M-RUS – 16 СТАНДАРТНАЯ МЕТОДИКА ОТБОРА ПРОБ БИТУМНЫХ МАТЕРИАЛОВ
  • D143 – 14 Standard Test Methods for Small Clear Specimens of Timber
  • D146/D146M – 04(2012)e1 Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing
  • D149 – 09(2013) Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
  • D149-RUS – 09(2013) Стандартный метод испытаний напряжения пробоя диэлектриков и электрической прочности твердых электроизоляционных материалов на промышленных частотах
  • D150 – 11 Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
  • D153 – 84(2014) Standard Test Methods for Specific Gravity of Pigments
  • D154 – 85(2009) Standard Guide for Testing Varnishes
  • D156 – 15 Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
  • D156-RUS – 15 Стандартный метод определения цвета нефтепродуктов по Сейболту (колориметр Сейболта)
  • D167 – 12a Standard Test Method for Apparent and True Specific Gravity and Porosity of Lump Coke
  • D173/D173M – 03(2011)e1 Standard Specification for Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing
  • D178 – 01(2010) Standard Specification for Rubber Insulating Matting
  • D185 – 07(2012) Standard Test Methods for Coarse Particles in Pigments
  • D187 – 08(2013) Standard Test Method for Burning Quality of Kerosine
  • D189 – 06(2014) Standard Test Method for Conradson Carbon Residue of Petroleum Products
  • D189-RUS – 06(2014) Стандартный метод определения углеродистого остатка нефтепродуктов по Конрадсону
  • D189-SP – 06(2014) Método de prueba estándar de Conradson para la determinación de residuos de carbono en productos derivados del petróleo
  • D197 – 87(2012) Standard Test Method for Sampling and Fineness Test of Pulverized Coal
  • D198 – 15 Standard Test Methods of Static Tests of Lumber in Structural Sizes
  • D202 – 17 Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation
  • D204 – 02(2016) Standard Test Methods for Sewing Threads
  • D209 – 81(2012) Standard Specification for Lampblack Pigment
  • D210 – 05(2011) Standard Specification for Bone Black Pigment
  • D211 – 67(2012) Standard Specification for Chrome Yellow and Chrome Orange Pigments
  • D217 – 17 Standard Test Methods for Cone Penetration of Lubricating Grease
  • D217-RUS – 17 СТАНДАРТНЫЕ МЕТОДЫ ОПРЕДЕЛЕНИЯ ПЕНЕТРАЦИИ КОНСИСТЕНТНОЙ СМАЗКИ МЕТОДОМ ПОГРУЖЕНИЯ КОНУСА
  • D226/D226M – 17 Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing
  • D227/D227M – 03(2011)e1 Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing
  • D228/D228M – 16 Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
  • D229 – 13 Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation
  • D233 – 13(2017) Standard Test Methods of Sampling and Testing Turpentine
  • D235 – 02(2012) Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)
  • D240 – 17 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
  • D240-RUS – 17 Стандартный метод определения теплоты сгорания жидких углеводородных топлив с помощью калориметрической бомбы
  • D240-SP – 17 Método de prueba estándar para determinación del calor de combustión de hidrocarburos combustibles líquidos mediante calorímetro de bomba
  • D242/D242M – 09(2014) Standard Specification for Mineral Filler For Bituminous Paving Mixtures
  • D243/D243M – 14 Standard Test Method for Residue of Specified Penetration
  • D244 – 09(2017) Standard Test Methods and Practices for Emulsified Asphalts
  • D245 – 06(2011) Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber
  • D256 – 10e1 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
  • D257 – 14 Standard Test Methods for DC Resistance or Conductance of Insulating Materials
  • D263 – 05(2011) Standard Specification for Chrome Oxide Green Pigment
  • D267 – 82(2014) Standard Specification for Gold Bronze Powder
  • D268 – 01(2012) Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material
  • D269 – 97(2015) Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives
  • D276 – 12 Standard Test Methods for Identification of Fibers in Textiles
  • D279 – 02(2012) Standard Test Methods for Bleeding of Pigments
  • D280 – 01(2012) Standard Test Methods for Hygroscopic Moisture (and Other Matter Volatile Under the Test Conditions) in Pigments
  • D280-RUS – 01(2012) Стандартные методы определения гигроскопической влажности пигментов (и содержания иных веществ, испаряющихся при условиях испытаний)
  • D281 – 12(2016) Standard Test Method for Oil Absorption of Pigments by Spatula Rub-out
  • D283 – 13 Standard Test Methods for Chemical Analysis of Cuprous Oxide and Copper Pigments
  • D287 – 12b Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
  • D287-RUS – 12b Стандартный метод определения плотности по API сырой нефти и нефтепродуктов (с помощью ареометра)
  • D291 – 07(2012) Standard Test Method for Cubic Foot Weight of Crushed Bituminous Coal
  • D293 – 93(2010) Standard Test Method for the Sieve Analysis of Coke
  • D293-RUS – 93(2010) Стандартный метод ситового анализа кокса
  • D295 – 12 Standard Test Methods for Varnished Cotton Fabrics Used for Electrical Insulation
  • D297 – 15 Standard Test Methods for Rubber Products—Chemical Analysis
  • D299/D299M – 04(2017) Standard Specification for Asbestos Yarns
  • D304 – 11 Standard Specification for n-Butyl Alcohol (Butanol)
  • D305 – 84(2014) Standard Test Method for Solvent-Extractable Material in Black Pigments
  • D312/D312M – 16a Standard Specification for Asphalt Used in Roofing
  • D315/D315M – 95(2017) Standard Specification for Woven Asbestos Tape
  • D322 – 97(2016) Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation
  • D323 – 15a Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
  • D323-RUS – 15a Стандартный метод определения упругости паров нефтепродуктов (Метод Рейда)
  • D329 – 07(2013) Standard Specification for Acetone
  • D329-RUS – 07(2013) Стандартная спецификация на ацетон
  • D330 – 07(2013) Standard Specification for 2-Butoxyethanol
  • D331 – 11 Standard Specification for 2-Ethoxyethanol
  • D332 – 87(2015) Standard Test Method for Relative Tinting Strength of White Pigments by Visual Observation
  • D333 – 01(2013) Standard Guide for Clear and Pigmented Lacquers
  • D341 – 17 Standard Practice for Viscosity-Temperature Charts for Liquid Petroleum Products
  • D344 – 11(2016) Standard Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts
  • D345 – 02(2010) Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications
  • D345-RUS – 02(2010) Стандартный метод отбора проб и испытаний хлористого кальция для применения в дорожных и строительных работах
  • D346/D346M – 11 Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis
  • D346/D346M-RUS – 11 Стандартная методика отбора и приготовления проб кокса для лабораторного анализа
  • D348 – 13 Standard Test Methods for Rigid Tubes Used for Electrical Insulation
  • D349 – 13 Standard Test Methods for Laminated Round Rods Used for Electrical Insulation
  • D350 – 13 Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation
  • D351 – 14 Standard Classification for Natural Muscovite Block Mica and Thins Based on Visual Quality
  • D352 – 97(2016) Standard Test Methods for Pasted Mica Used in Electrical Insulation
  • D360 – 12 Standard Specification for Shellac Varnishes
  • D365 – 01(2017) Standard Guide for Soluble Nitrocellulose Base Solutions
  • D374/D374M – 16 Standard Test Methods for Thickness of Solid Electrical Insulation
  • D375/D375M – 95(2017) Standard Specification for Asbestos Roving
  • D378 – 10(2016) Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type
  • D380 – 94(2012) Standard Test Methods for Rubber Hose
  • D381 – 12(2017) Standard Test Method for Gum Content in Fuels by Jet Evaporation
  • D381-RUS – 12(2017) СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ СОДЕРЖАНИЯ СМОЛ В ТОПЛИВАХ МЕТОДОМ СТРУЙНОГО ВЫПАРИВАНИЯ
  • D381-SP – 12(2017) Método de prueba estándar para contenido de goma en combustibles por evaporación con jet
  • D387 – 00(2017) Standard Test Method for Color and Strength of Chromatic Pigments with a Mechanical Muller
  • D388 – 17a Standard Classification of Coals by Rank
  • D395 – 16e1 Standard Test Methods for Rubber Property—Compression Set
  • D396 – 17a Standard Specification for Fuel Oils
  • D402/D402M – 14 Standard Test Method for Distillation of Cutback Asphalt
  • D409/D409M – 16 Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method
  • D409/D409M-RUS – 16 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ РАЗМОЛОСПОСОБНОСТИ УГЛЕЙ С ИСПОЛЬЗОВАНИЕМ УСТАНОВКИ ХАРДГРОВА
  • D412 – 16 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
  • D412-RUS – 16 СТАНДАРТНЫЕ МЕТОДЫ ИСПЫТАНИЙ НА РАСТЯЖЕНИЕ ВУЛКАНИЗИРОВАННОГО КАУЧУКА И ТЕРМОПЛАСТИЧНЫХ ЭЛАСТОМЕРОВ
  • D413 – 98(2017) Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate
  • D425 – 17 Standard Test Method for Centrifuge Moisture Equivalent of Soils
  • D429 – 14 Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates
  • D430 – 06(2012) Standard Test Methods for Rubber Deterioration—Dynamic Fatigue
  • D440 – 07(2012) Standard Test Method of Drop Shatter Test for Coal
  • D441 – 07(2012) Standard Test Method of Tumbler Test for Coal
  • D444 – 88(2014) Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow)
  • D445 – 17a Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
  • D445-RUS – 17a СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ КИНЕМАТИЧЕСКОЙ ВЯЗКОСТИ ПРОЗРАЧНЫХ И НЕПРОЗРАЧНЫХ ЖИДКОСТЕЙ (И РАСЧЕТ ДИНАМИЧЕСКОЙ ВЯЗКОСТИ)
  • D445-SP – 17a Método de prueba estándar para determinación de la viscosidad cinemática de líquidos transparentes y opacos (y cálculo de la viscosidad dinámica)
  • D446 – 12(2017) Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers
  • D448 – 12(2017) Standard Classification for Sizes of Aggregate for Road and Bridge Construction
  • D449/D449M – 03(2014)e1 Standard Specification for Asphalt Used in Dampproofing and Waterproofing
  • D450/D450M – 07(2013)e1 Standard Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing
  • D451/D451M – 17 Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products
  • D452/D452M – 91(2013)e1 Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products
  • D454 – 04(2015) Standard Test Method for Rubber Deterioration by Heat and Air Pressure
  • D459 – 16 Standard Terminology Relating to Soaps and Other Detergents
  • D460 – 91(2014) Standard Test Methods for Sampling and Chemical Analysis of Soaps and Soap Products
  • D464 – 15 Standard Test Methods for Saponification Number of Pine Chemical Products Including Tall Oil and Other Related Products
  • D465 – 15 Standard Test Methods for Acid Number of Pine Chemical Products Including Tall Oil and Other Related Products
  • D465-RUS – 15 Стандартные методы определения кислотного числа продуктов переработки сосны, включая талловое масло и другие родственные продукты
  • D470 – 13 Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
  • D471 – 16a Standard Test Method for Rubber Property—Effect of Liquids
  • D471-RUS – 16a Стандартный метод определения воздействия жидкостей на резину
  • D473 – 07(2017)e1 Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
  • D473-RUS – 07(2017)e1 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ ОСАДКА В СЫРОЙ НЕФТИ И МАЗУТЕ С ПОМОЩЬЮ МЕТОДА ЭКСТРАКЦИИ
  • D473-SP – 07(2017)e1 Método de prueba estándar para sedimentos en petróleo crudo y fuelóleos por el método de extracción
  • D476 – 15 Standard Classification for Dry Pigmentary Titanium Dioxide Products
  • D478 – 02(2012) Standard Specification for Zinc Yellow (Zinc Chromate) Pigments
  • D480 – 88(2014) Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes
  • D482 – 13 Standard Test Method for Ash from Petroleum Products
  • D482-RUS – 13 Стандартный метод определения зольности нефтепродуктов
  • D483 – 04(2014) Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils
  • D490 – 92(2016) Standard Specification for Road Tar
  • D494 – 11 Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products
  • D495 – 14 Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
  • D500 – 95(2016) Standard Test Methods of Chemical Analysis of Sulfonated and Sulfated Oils
  • D501 – 03(2016) Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents
  • D502 – 89(2016) Standard Test Method for Particle Size of Soaps and Other Detergents
  • D509 – 15 Standard Test Methods of Sampling and Grading Rosin
  • D511 – 14 Standard Test Methods for Calcium and Magnesium In Water
  • D512 – 12 Standard Test Methods for Chloride Ion In Water
  • D512-RUS – 12 Стандартные методы определения хлорид-иона в воде
  • D513 – 16 Standard Test Methods for Total and Dissolved Carbon Dioxide in Water
  • D513-RUS – 16 Стандартные методы определения общего и растворенного количества диоксида углерода в воде
  • D516 – 16 Standard Test Method for Sulfate Ion in Water
  • D516-RUS – 16 Стандартный метод определения сульфат-ионов в воде
  • D517 – 98(2015) Standard Specification for Asphalt Plank
  • D519 – 04(2013) Standard Test Method for Length of Fiber in Wool Top
  • D520 – 00(2011) Standard Specification for Zinc Dust Pigment
  • D521 – 02(2012) Standard Test Methods for Chemical Analysis of Zinc Dust (Metallic Zinc Powder)
  • D522/D522M – 17 Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
  • D523 – 14 Standard Test Method for Specular Gloss
  • D523-RUS – 14 Стандартный метод определения зеркального глянца
  • D524 – 15 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
  • D524-SP – 15 Método de prueba estándar para la determinación de residuos de carbono Ramsbottom en productos derivados del petróleo
  • D524-RUS – 15 Стандартный метод определения коксуемости нефтепродуктов по Рамсботтому
  • D525 – 12a Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)
  • D525-RUS – 12a Стандартный метод определения стойкости бензина к окислению (метод индукционного периода)
  • D525-SP – 12a Método de prueba estándar para estabilidad ante la oxidación de la gasolina (método del período de inducción)
  • D531 – 15 Standard Test Method for Rubber Property—Pusey and Jones Indentation
  • D542 – 14 Standard Test Method for Index of Refraction of Transparent Organic Plastics
  • D543 – 14 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
  • D545 – 14 Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)
  • D546 – 17 Standard Test Method for Sieve Analysis of Mineral Filler for Asphalt Paving Mixtures
  • D558 – 11 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures
  • D559/D559M – 15 Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures
  • D560/D560M – 16 Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures
  • D561 – 82(2014) Standard Specification for Carbon Black Pigment for Paint
  • D562 – 10(2014) Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
  • D564 – 87(2017) Standard Test Methods for Liquid Paint Driers
  • D565 – 99(2013) Standard Test Method for Carbonizable Substances in White Mineral Oil
  • D565-RUS – 99(2013) Стандартный метод определения карбонизируемых веществ в белом минеральном масле
  • D566 – 17 Standard Test Method for Dropping Point of Lubricating Grease
  • D566-RUS – 17 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ ТОЧКИ КАПЛЕОБРАЗОВАНИЯ КОНСИСТЕНТНОЙ СМАЗКИ
  • D570 – 98(2010)e1 Standard Test Method for Water Absorption of Plastics
  • D570-RUS – 98(2010)e1 Стандартный метод испытания по определениюводопоглощения пластмассами
  • D572 – 04(2015) Standard Test Method for Rubber—Deterioration by Heat and Oxygen
  • D573 – 04(2015) Standard Test Method for Rubber—Deterioration in an Air Oven
  • D575 – 91(2012) Standard Test Methods for Rubber Properties in Compression
  • D578/D578M – 05(2011)e1 Standard Specification for Glass Fiber Strands
  • D579/D579M – 15 Standard Specification for Greige Woven Glass Fabrics
  • D580/D580M – 15 Standard Specification for Greige Woven Glass Tapes and Webbings
  • D581/D581M – 12 Standard Specification for Glass Fiber Greige Braided Tubular Sleeving
  • D584 – 10 Standard Test Method for Wool Content of Raw Wool-Laboratory Scale
  • D596 – 01(2011) Standard Guide for Reporting Results of Analysis of Water
  • D600 – 07(2012) Standard Specification for Liquid Paint Driers
  • D602 – 81(2012) Standard Specification for Barium Sulfate Pigments
  • D605 – 82(2012) Standard Specification for Magnesium Silicate Pigment (Talc)
  • D607 – 82(2012) Standard Specification for Wet Ground Mica Pigments
  • D608 – 05(2011) Standard Specification for Dibutyl Phthalate
  • D609 – 17 Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products
  • D610 – 08(2012) Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces
  • D611 – 12(2016) Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
  • D611-RUS – 12(2016) Стандартные методы определения анилиновой точки и анилиновой точки смеси нефтепродуктов и углеводородных растворителей
  • D612 – 88(2017) Standard Test Method for Carbonizable Substances in Paraffin Wax
  • D613 – 17ce1 Standard Test Method for Cetane Number of Diesel Fuel Oil
  • D618 – 13 Standard Practice for Conditioning Plastics for Testing
  • D619 – 14 Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation
  • D622 – 99(2012) Standard Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System
  • D623 – 07(2014) Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression
  • D624 – 00(2012) Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
  • D624-RUS – 00(2012) Стандартный метод определения прочности на разрыв стандартной вулканизированной резины и термопластических эластомеров
  • D628/D628M – 95(2017) Standard Specification for Asbestos Tubular Sleeving
  • D629 – 15 Standard Test Methods for Quantitative Analysis of Textiles
  • D632 – 12 Standard Specification for Sodium Chloride
  • D633 – 11(2016) Standard Volume Correction Table for Road Tar
  • D635 – 14 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
  • D638 – 14 Standard Test Method for Tensile Properties of Plastics
  • D642 – 15 Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads
  • D646 – 13 Standard Test Method for Mass Per Unit Area of Paper and Paperboard of Aramid Papers (Basis Weight)
  • D648 – 16 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
  • D653 – 14 Standard Terminology Relating to Soil, Rock, and Contained Fluids
  • D660 – 93(2011) Standard Test Method for Evaluating Degree of Checking of Exterior Paints
  • D661 – 93(2011) Standard Test Method for Evaluating Degree of Cracking of Exterior Paints
  • D662 – 93(2011) Standard Test Method for Evaluating Degree of Erosion of Exterior Paints
  • D664 – 17 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
  • D664-RUS – 17 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ КИСЛОТНОГО ЧИСЛА НЕФТЕПРОДУКТОВ С ПОМОЩЬЮ ПОТЕНЦИОМЕТРИЧЕСКОГО ТИТРОВАНИЯ
  • D664-SP – 17 Método de prueba estándar para determinación del índice de acidez de productos derivados del petróleo mediante titulación potenciométrica
  • D665 – 14e1 Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
  • D668 – 12 Standard Test Methods of Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation
  • D685 – 17 Standard Practice for Conditioning Paper and Paper Products for Testing
  • D689 – 17 Standard Test Method for Internal Tearing Resistance of Paper
  • D692/D692M – 15 Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures
  • D695 – 15 Standard Test Method for Compressive Properties of Rigid Plastics
  • D696 – 16 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer
  • D698 – 12e2 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))
  • D704 – 99(2012) Standard Specification for Melamine-Formaldehyde Molding Compounds
  • D705 – 99(2012) Standard Specification for Urea-Formaldehyde Molding Compounds
  • D706 – 15 Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA)
  • D707 – 15 Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB)
  • D709 – 17 Standard Specification for Laminated Thermosetting Materials
  • D710 – 13 Standard Specification for Vulcanized Fibre Sheets, Rods, and Tubes Used for Electrical Insulation
  • D711 – 10(2015) Standard Test Method for No-Pick-Up Time of Traffic Paint
  • D713 – 12(2017) Standard Practice for Conducting Road Service Tests on Fluid Traffic Marking Materials
  • D714 – 02(2017) Standard Test Method for Evaluating Degree of Blistering of Paints
  • D715 – 86(2014) Standard Test Methods for Analysis of Barium Sulfate Pigment
  • D716 – 86(2012) Standard Test Methods for Evaluating Mica Pigment
  • D717 – 86(2014) Standard Test Methods for Analysis of Magnesium Silicate Pigment
  • D718 – 86(2014) Standard Test Methods for Analysis of Aluminum Silicate Pigment
  • D720/D720M – 15e1 Standard Test Method for Free-Swelling Index of Coal
  • D721 – 17 Standard Test Method for Oil Content of Petroleum Waxes
  • D721-RUS – 17 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛНИЯ СОДЕРЖАНИЯ МАСЛА В НЕФТЯНЫХ ПАРАФИНАХ
  • D731 – 10 Standard Test Method for Molding Index of Thermosetting Molding Powder
  • D732 – 17 Standard Test Method for Shear Strength of Plastics by Punch Tool
  • D737 – 18 Standard Test Method for Air Permeability of Textile Fabrics
  • D740 – 11 Standard Specification for Methyl Ethyl Ketone
  • D746 – 14 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
  • D747 – 10 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
  • D748 – 14 Standard Specification for Natural Block Mica and Mica Films Suitable for Use in Fixed Mica-Dielectric Capacitors
  • D750 – 12(2017) Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus
  • D751 – 06(2011) Standard Test Methods for Coated Fabrics
  • D763 – 06(2012) Standard Specification for Raw and Burnt Umber Pigments
  • D765 – 87(2014) Standard Specification for Raw and Burnt Sienna Pigments
  • D768 – 01(2012) Standard Specification for Yellow Iron Oxide Hydrated
  • D769 – 01(2012) Standard Specification for Black Synthetic Iron Oxide
  • D770 – 11 Standard Specification for Isopropyl Alcohol
  • D772 – 86(2011) Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints
  • D779 – 16 Standard Test Method for Determining the Water Vapor Resistance of Sheet Materials in Contact with Liquid Water by the Dry Indicator Method
  • D785 – 08(2015) Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials
  • D787 – 12 Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds
  • D788 – 16 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
  • D789 – 15 Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA)
  • D790 – 17 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
  • D792 – 13 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
  • D792-RUS – 13 Стандартный метод определения плотности и удельного веса (относительной плотности) пластиков по объему вытесненной жидкости
  • D800 – 05(2014) Standard Test Methods of Chemical Analysis of Industrial Metal Cleaning Compositions
  • D801 – 02(2017) Standard Test Methods for Sampling and Testing Dipentene
  • D802 – 02(2017) Standard Test Methods for Sampling and Testing Pine Oils
  • D803 – 15 Standard Test Methods for Testing Tall Oil
  • D804 – 12(2017) Standard Terminology Relating to Pine Chemicals, Including Tall Oil and Related Products
  • D806 – 11 Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures
  • D807 – 14 Standard Practice for Assessing the Tendency of Industrial Boiler Waters to Cause Embrittlement (USBM Embrittlement Detector Method)
  • D808 – 16 Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method)
  • D813 – 07(2014) Standard Test Method for Rubber Deterioration—Crack Growth
  • D814 – 95(2014) Standard Test Method for Rubber Property—Vapor Transmission of Volatile Liquids
  • D816 – 06(2016) Standard Test Methods for Rubber Cements
  • D817 – 12 Standard Test Methods of Testing Cellulose Acetate Propionate and Cellulose Acetate Butyrate
  • D820 – 93(2016) Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents
  • D822/D822M – 13 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
  • D823 – 17 Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels
  • D828 – 16 Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus
  • D831/D831M – 12 Standard Test Method for Gas Content of Cable and Capacitor Oils
  • D832 – 07(2012) Standard Practice for Rubber Conditioning For Low Temperature Testing
  • D841 – 17a Standard Specification for Nitration Grade Toluene
  • D843 – 18 Standard Specification for Nitration Grade Xylene
  • D847 – 16 Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons
  • D848 – 14 Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons
  • D848-RUS – 14 Стандартный метод определения цвета промывочной кислоты промышленных ароматических углеводородов
  • D849 – 15 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
  • D849-RUS – 15 Стандартный метод испытаний промышленных ароматических углеводородов на коррозионную агрессивность по отношению к медной пластинке
  • D850 – 16 Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials
  • D850-RUS – 16 Стандартный метод перегонки промышленных ароматических углеводородов и их аналогов
  • D852 – 16 Standard Test Method for Solidification Point of Benzene
  • D854 – 14 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
  • D857 – 17 Standard Test Method for Aluminum in Water
  • D858 – 17 Standard Test Methods for Manganese in Water
  • D859 – 16 Standard Test Method for Silica in Water
  • D861 – 07(2013) Standard Practice for Use of the Tex System to Designate Linear Density of Fibers, Yarn Intermediates, and Yarns
  • D865 – 11 Standard Test Method for Rubber – Deterioration by Heating in Air (Test Tube Enclosure)
  • D868 – 10(2015) Standard Practice for Determination of Degree of Bleeding of Traffic Paint
  • D869 – 85(2015) Standard Test Method for Evaluating Degree of Settling of Paint
  • D870 – 15 Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
  • D871 – 96(2010) Standard Test Methods of Testing Cellulose Acetate
  • D873 – 12 Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)
  • D873-RUS – 12 Стандартный метод определения устойчивости к окислению авиационных топлив (метод потенциального остатка)
  • D874 – 13a Standard Test Method for Sulfated Ash from Lubricating Oils and Additives
  • D874-RUS – 13a Стандартный метод определения сульфатированной золы в смазочных маслах и присадках
  • D876 – 13 Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation
  • D877/D877M – 13 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
  • D877/D877M-RUS – 13 Стандартный метод испытаний электроизоляционных жидкостей на напряжение пробоя с использованием дисковых электродов
  • D880 – 92(2015) Standard Test Method for Impact Testing for Shipping Containers and Systems
  • D882 – 12 Standard Test Method for Tensile Properties of Thin Plastic Sheeting
  • D882-RUS – 12 Стандартный метод испытаний на растяжение для тонких пластмассовых покрытий
  • D883 – 17 Standard Terminology Relating to Plastics
  • D885/D885M – 10A(2014)e1 Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Manufactured Organic-Base Fibers
  • D885/D885M-RUS – 10a(2014)e1 Стандартные методы испытаний шинных кордов, тканей шинного корда и волоконной пряжи технического назначения из искусственного волокна на органической основе
  • D887 – 13 Standard Practices for Sampling Water-Formed Deposits
  • D888 – 12e1 Standard Test Methods for Dissolved Oxygen in Water
  • D888-RUS – 12e1 Стандартные методы определения концентрации растворенного в воде кислорода
  • D889 – 13(2017) Standard Test Method for Volatile Oil in Rosin
  • D890 – 12(2016) Standard Test Method for Water in Liquid Pine Chemicals
  • D892 – 13e1 Standard Test Method for Foaming Characteristics of Lubricating Oils
  • D892-RUS – 13e1 Стандартный метод определения характеристик вспенивания смазочных масел
  • D893 – 14 Standard Test Method for Insolubles in Used Lubricating Oils
  • D893-RUS – 14 Стандартный метод определения содержания нерастворимых веществ в отработанных смазочных маслах
  • D896 – 04(2017) Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents
  • D897 – 08(2016) Standard Test Method for Tensile Properties of Adhesive Bonds
  • D899 – 00(2013) Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive
  • D902 – 12 Standard Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation
  • D903 – 98(2017) Standard Test Method for Peel or Stripping Strength of Adhesive Bonds
  • D904 – 99(2013) Standard Practice for Exposure of Adhesive Specimens to Artificial Light
  • D905 – 08(2013) Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
  • D906 – 98(2017) Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
  • D907 – 15 Standard Terminology of Adhesives
  • D909 – 17 Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline
  • D910 – 17a Standard Specification for Leaded Aviation Gasolines
  • D913 – 15 Standard Practice for Evaluating Degree of Traffic Marking Line Wear
  • D914 – 12 Standard Test Methods for Ethylcellulose
  • D922 – 11 Standard Specification for Nonrigid Vinyl Chloride Polymer Tubing
  • D923 – 15 Standard Practices for Sampling Electrical Insulating Liquids
  • D924 – 15 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
  • D924-RUS – 15 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ КОЭФФИЦИЕНТА РАССЕЯНИЯ (ИЛИ КОЭФФИЦИЕНТА МОЩНОСТИ) И ОТНОСИТЕЛЬНОЙ ДИЭЛЕКТРИЧЕСКОЙ ПРОНИЦАЕМОСТИ (ДИЭЛЕКТРИЧЕСКОЙ ПОСТОЯННОЙ) ЭЛЕКТРОИЗОЛЯЦИОННЫХ ЖИДКОСТЕЙ
  • D925 – 14 Standard Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion)
  • D926 – 17 Standard Test Method for Rubber Property—Plasticity and Recovery (Parallel Plate Method)
  • D928 – 03(2017) Standard Specification for Sodium Bicarbonate
  • D932 – 15 Standard Practice for Filamentous Iron Bacteria in Water and Water-Formed Deposits
  • D933 – 84(2012) Standard Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits
  • D934 – 13 Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction
  • D937 – 07(2012) Standard Test Method for Cone Penetration of Petrolatum
  • D937-RUS – 07(2012) Стандартный метод определения пенетрации петролатума конусным пенетрометром
  • D938 – 12(2017) Standard Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum
  • D938-RUS – 12(2017) СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ ТОЧКИЗАСТЫВАНИЯ НЕФТЯНЫХ ПАРАФИНОВ, ВКЛЮЧАЯПЕТРОЛАТУМ СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ ТОЧКИ ЗАСТЫВАНИЯ НЕФТЯНЫХ ПАРАФИНОВ, ВКЛЮЧАЯ ПЕТРОЛАТУМ
  • D942 – 15 Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method
  • D942-RUS – 15 Стандартный метод определения стойкости консистентных смазок к окислению с помощью кислородного сосуда высокого давления
  • D943 – 17 Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils
  • D945 – 16 Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
  • D945-RUS – 16 Стандартные методы определения свойств резины при сжатии или срезе (с помощью вибраторного осциллографа)
  • D946/D946M – 15 Standard Specification for Penetration-Graded Asphalt Binder for Use in Pavement Construction
  • D946/D946M-RUS – 15 СТАНДАРТНАЯ СПЕЦИФИКАЦИЯ НА ПРОПИТОЧНОЕ БИТУМНОЕ ВЯЖУЩЕЕ ДЛЯ СТРОИТЕЛЬСТВА ДОРОГ
  • D950 – 03(2011) Standard Test Method for Impact Strength of Adhesive Bonds
  • D951 – 17 Standard Test Method for Water Resistance of Shipping Containers by Spray Method
  • D952 – 15 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
  • D952-RUS – 15 Стандартный метод испытаний листового пластика и электроизоляционных материалов на прочность сцепления или когезионную прочность
  • D953 – 10 Standard Test Method for Bearing Strength of Plastics
  • D955 – 08(2014) Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
  • D957 – 12 Standard Practice for Determining Surface Temperature of Molds for Plastics
  • D962 – 81(2014) Standard Specification for Aluminum Powder and Paste Pigments for Paints
  • D964 – 03(2014) Standard Specification for Metallic Copper Powder for Use in Antifouling Paints
  • D968 – 17 Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
  • D971 – 12 Standard Test Method for Interfacial Tension of Oil Against Water by the Ring Method
  • D971-RUS – 12 Стандартный метод испытаний по определению межфазного натяжения масло  вода с применением метода отрыва кольца
  • D972 – 16 Standard Test Method for Evaporation Loss of Lubricating Greases and Oils
  • D974 – 14e2 Standard Test Method for Acid and Base Number by Color-Indicator Titration
  • D974-RUS – 14e2 Стандартный метод определения кислотного и щелочного числа с помощью титрования с цветным индикатором
  • D975 – 17a Standard Specification for Diesel Fuel Oils
  • D976 – 06(2016) Standard Test Method for Calculated Cetane Index of Distillate Fuels
  • D976-RUS – 06(2016) Стандартный метод определения расчетного цетанового индекса дистиллятного топлива
  • D977 – 17 Standard Specification for Emulsified Asphalt
  • D979/D979M – 15 Standard Practice for Sampling Bituminous Paving Mixtures
  • D982 – 16 Standard Test Method for Organic Nitrogen in Paper and Paperboard
  • D991 – 89(2014) Standard Test Method for Rubber Property—Volume Resistivity Of Electrically Conductive and Antistatic Products
  • D994/D994M – 11(2016) Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)
  • D996 – 16 Standard Terminology of Packaging and Distribution Environments
  • D999 – 08(2015) Standard Test Methods for Vibration Testing of Shipping Containers
  • D1000 – 17 Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
  • D1002 – 10 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
  • D1002-RUS – 10 Стандартный метод определения кажущейся сдвиговой прочности склеенных внахлест металлических образцов (металл/металл) с использованием растягивающей нагрузки
  • D1003 – 13 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
  • D1003-RUS – 13 Стандартные методы определения мутности и коэффициента пропускания света прозрачных пластмасс
  • D1004 – 13 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
  • D1005 – 95(2013) Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
  • D1006/D1006M – 13 Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood
  • D1007 – 11 Standard Specification for sec-Butyl Alcohol
  • D1015 – 05(2015) Standard Test Method for Freezing Points of High-Purity Hydrocarbons
  • D1016 – 05(2015) Standard Test Method for Purity of Hydrocarbons from Freezing Points
  • D1018 – 11(2016) Standard Test Method for Hydrogen In Petroleum Fractions
  • D1018-RUS – 11(2016) Стандартный метод определения содержания водорода в нефтяных фракциях
  • D1025 – 10(2015)e1 Standard Test Method for Nonvolatile Residue of Polymerization-Grade Butadiene
  • D1036 – 99(2017) Standard Test Methods of Static Tests of Wood Poles
  • D1037 – 12 Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
  • D1038 – 11 Standard Terminology Relating to Veneer and Plywood
  • D1039 – 16 Standard Test Methods for Glass-Bonded Mica Used as Electrical Insulation
  • D1042 – 12(2017) Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture
  • D1043 – 16 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
  • D1044 – 13 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion
  • D1045 – 14 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
  • D1047 – 16 Standard Specification for Poly(Vinyl Chloride) Jacket for Wire and Cable
  • D1048 – 14 Standard Specification for Rubber Insulating Blankets
  • D1049 – 98(2017) Standard Specification for Rubber Insulating Covers
  • D1050 – 05(2017) Standard Specification for Rubber Insulating Line Hose
  • D1051 – 14a Standard Specification for Rubber Insulating Sleeves
  • D1052 – 09(2014) Standard Test Method for Measuring Rubber Deterioration—Cut Growth Using Ross Flexing Apparatus
  • D1053 – 92a(2012) Standard Test Methods for Rubber Property—Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics
  • D1056 – 14 Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber
  • D1059 – 17 Standard Test Method for Yarn Number Based on Short-Length Specimens
  • D1060 – 10 Standard Practice for Core Sampling of Raw Wool in Packages for Determination of Percentage of Clean Wool Fiber Present
  • D1061/D1061M – 95(2017) Standard Specification for Asbestos Lap
  • D1062 – 08(2015) Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
  • D1065 – 96(2014)e1 Standard Test Method for Unsaponifiable Matter in Naval Stores, Including Rosin, Tall Oil, and Related Products
  • D1066 – 11 Standard Practice for Sampling Steam
  • D1066-RUS – 11 СТАНДАРТНАЯ МЕТОДИКА ОТБОРА ПРОБ ПАРА
  • D1067 – 16 Standard Test Methods for Acidity or Alkalinity of Water
  • D1067-RUS – 16 СТАНДАРТНЫЕ МЕТОДЫ ИСПЫТАНИЙ ДЛЯ ОПРЕДЕЛЕНИЯ КИСЛОТНОСТИ ИЛИ ЩЕЛОЧНОСТИ ВОДЫ
  • D1068 – 15 Standard Test Methods for Iron in Water
  • D1068-RUS – 15 Стандартные методы определения содержания железа в воде
  • D1070 – 03(2017) Standard Test Methods for Relative Density of Gaseous Fuels
  • D1071 – 17 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
  • D1072 – 06(2017) Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration
  • D1073 – 16 Standard Specification for Fine Aggregate for Asphalt Paving Mixtures
  • D1074 – 17 Standard Test Method for Compressive Strength of Asphalt Mixtures
  • D1075 – 11 Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
  • D1076 – 15 Standard Specification for Rubber—Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex
  • D1078 – 11 Standard Test Method for Distillation Range of Volatile Organic Liquids
  • D1079 – 16 Standard Terminology Relating to Roofing and Waterproofing
  • D1082 – 17 Standard Test Method for Dissipation Factor and Permittivity (Dielectric Constant) of Mica
  • D1084 – 16 Standard Test Methods for Viscosity of Adhesives
  • D1091 – 11(2016) Standard Test Methods for Phosphorus in Lubricating Oils and Additives
  • D1092 – 12(2017) Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases
  • D1093 – 11(2017) Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues
  • D1094 – 07(2013) Standard Test Method for Water Reaction of Aviation Fuels
  • D1094-RUS – 07(2013) Стандартный метод определения взаимодействия авиационного топлива с водой
  • D1101 – 97a(2013) Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use
  • D1102 – 84(2013) Standard Test Method for Ash in Wood
  • D1105 – 96(2013) Standard Test Method for Preparation of Extractive-Free Wood
  • D1106 – 96(2013) Standard Test Method for Acid-Insoluble Lignin in Wood
  • D1107 – 96(2013) Standard Test Method for Ethanol-Toluene Solubility of Wood
  • D1108 – 96(2013) Standard Test Method for Dichloromethane Solubles in Wood
  • D1109 – 84(2013) Standard Test Method for 1 % Sodium Hydroxide Solubility of Wood
  • D1110 – 84(2013) Standard Test Methods for Water Solubility of Wood
  • D1113 – 13 Standard Test Method for Vegetable Matter and Other Alkali-Insoluble Impurities in Scoured Wool
  • D1118/D1118M – 95(2017) Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles
  • D1119 – 05(2015) Standard Test Method for Percent Ash Content of Engine Coolants
  • D1119-RUS – 05(2015) Стандартный метод определения процентного содержания золы в жидкостях для охлаждения двигателей
  • D1120 – 17 Standard Test Method for Boiling Point of Engine Coolants
  • D1120-RUS – 17 Стандартный метод определения температуры кипения oхлаждающих жидкостей двигателей
  • D1121 – 11 Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
  • D1121-RUS – 11 Стандартный метод определения запаса щелочности охлаждающих жидкостей и антикоррозийных присадок двигателей
  • D1122 – 16(2017)e1 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
  • D1123 – 99(2015) Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
  • D1123-RUS – 99(2015) Стандартные методы определения воды в охлаждающей жидкости двигателя с помощью реактива Карла Фишера
  • D1125 – 14 Standard Test Methods for Electrical Conductivity and Resistivity of Water
  • D1125-RUS – 14 Стандартные методы измерения удельной электрической проводимости и удельного электрического сопротивления воды
  • D1126 – 17 Standard Test Method for Hardness in Water
  • D1129 – 13 Standard Terminology Relating to Water
  • D1133 – 13 Standard Test Method for Kauri-Butanol Value of Hydrocarbon Solvents
  • D1135 – 86(2014) Standard Test Methods for Chemical Analysis of Blue Pigments
  • D1139/D1139M – 15 Standard Specification for Aggregate for Single or Multiple Bituminous Surface Treatments
  • D1140 – 17 Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing
  • D1141 – 98(2013) Standard Practice for the Preparation of Substitute Ocean Water
  • D1142 – 95(2012) Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature
  • D1143/D1143M – 07(2013) Standard Test Methods for Deep Foundations Under Static Axial Compressive Load
  • D1144 – 99(2016) Standard Practice for Determining Strength Development of Adhesive Bonds
  • D1146 – 00(2013) Standard Test Method for Blocking Point of Potentially Adhesive Layers
  • D1148 – 13 Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces
  • D1149 – 16 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
  • D1149-RUS – 16 Стандартные методы определения снижения качества резин — образование трещин в среде с контролируемым содержанием озона
  • D1151 – 00(2013) Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
  • D1152 – 06(2012) Standard Specification for Methanol (Methyl Alcohol)
  • D1153 – 12 Standard Specification for Methyl Isobutyl Ketone
  • D1155 – 10(2015) Standard Test Method for Roundness of Glass Spheres
  • D1157 – 91(2014) Standard Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons
  • D1159 – 07(2017) Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration
  • D1159-RUS – 07(2017)
  • 5.1 Согласно (1)3, для определения содержания всех загрязнений (растворенных химических соединений, твердых частиц и абсорбированных на них химикатов и капель воды) важно получение репрезентативных проб пара.Точной мерой чистоты пара является информация, которую можно использовать для определения того, находится ли уровень загрязнения в установленных пределах, с целью предотвращения разрушения или износа отводящего пар оборудования за счет коррозии, эрозии, обусловленной твердыми частицами, ускоряемой потоком коррозии и наростом отложений. Загрязнения в паре могут поступать из примесей, содержащихся в воде для питания котлов, неэффективно работающих пароотделителей, естественной растворимости солей в паре, а также благодаря другим факторам. Большинство обычно определяемых и анализируемых параметров – это проводимость, обусловленная наличием натрия, кальция, железа, меди и катионов.
  • D1160 – 15 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
  • D1160-RUS – 15 Стандартный метод перегонки нефтепродуктов при пониженном давлении
  • D1165 – 13 Standard Nomenclature of Commercial Hardwoods and Softwoods
  • D1166 – 84(2013) Standard Test Method for Methoxyl Groups in Wood and Related Materials
  • D1169 – 11 Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
  • D1169-RUS – 11 Стандартный метод определения удельного сопротивления электроизоляционных жидкостей
  • D1171 – 16e1 Standard Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors (Triangular Specimens)
  • D1172 – 15 Standard Guide for pH of Aqueous Solutions of Soaps and Detergents
  • D1173 – 07(2015) Standard Test Method for Foaming Properties of Surface-Active Agents
  • D1176 – 14 Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes
  • D1176-RUS – 14 Стандартная методика отбора проб и приготовления водных растворов охлаждающих жидкостей и антикоррозионных составов для двигателей для испытательных целей
  • D1177 – 17 Standard Test Method for Freezing Point of Aqueous Engine Coolants
  • D1179 – 16 Standard Test Methods for Fluoride Ion in Water
  • D1183 – 03(2011) Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
  • D1184 – 98(2012) Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
  • D1185 – 98a(2017) Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
  • D1187/D1187M – 97(2011)e1 Standard Specification for Asphalt-Base Emulsions for Use as Protective Coatings for Metal
  • D1188 – 07(2015) Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
  • D1193 – 06(2011) Standard Specification for Reagent Water
  • D1193-RUS – 06(2011) Стандартная спецификация на воду реактивной чистоты
  • D1195/D1195M – 09(2015) Standard Test Method for Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements
  • D1196/D1196M – 12(2016) Standard Test Method for Nonrepetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements
  • D1199 – 86(2014) Standard Specification for Calcium Carbonate Pigments
  • D1200 – 10(2014) Standard Test Method for Viscosity by Ford Viscosity Cup
  • D1200-RUS – 10(2014) Стандартный метод определения вязкости с помощью чашечного вискозиметра Форда
  • D1201 – 13 Standard Specification for Thermosetting Polyester Molding Compounds
  • D1203 – 16 Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods
  • D1204 – 14 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
  • D1204-RUS – 14 Стандартный метод определения изменений линейных размеров нежестких термопластичных листов или пленок при повышенной температуре
  • D1208 – 96(2012) Standard Test Methods for Common Properties of Certain Pigments
  • D1209 – 05(2011) Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
  • D1209-RUS – 05(2011) Стандартный метод определения цвета прозрачных жидкостей (платино-кобальтовая шкала)
  • D1210 – 05(2014) Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
  • D1212 – 91(2013) Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
  • D1214 – 10(2015)e1 Standard Test Method for Sieve Analysis of Glass Spheres
  • D1217 – 15 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
  • D1218 – 12(2016) Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids
  • D1218-RUS – 12(2016) Стандартный метод определения показателя преломления и его дисперсии для жидких углеводородов
  • D1227 – 13 Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing
  • D1229 – 03(2015) Standard Test Method for Rubber Property—Compression Set at Low Temperatures
  • D1230 – 17 Standard Test Method for Flammability of Apparel Textiles
  • D1234 – 13 Standard Test Method of Sampling and Testing Staple Length of Grease Wool
  • D1238 – 13 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
  • D1238-RUS – 13 Стандартный метод определения скоростей истечения расплава термопластиков с помощью экструзионного пластометра
  • D1239 – 14 Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals
  • D1239-RUS – 14 Стандартный метод испытания пластмассовых пленок на стойкость к экстракции химическими реактивами
  • D1240 – 14 Standard Test Methods for Rosin Acids Content of Pine Chemicals, Including Rosin, Tall Oil, and Related Products
  • D1241 – 15 Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses
  • D1243 – 15 Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers
  • D1244 – 98(2011) Standard Practice for Designation of Yarn Construction
  • D1245 – 17 Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy
  • D1246 – 16 Standard Test Method for Bromide Ion in Water
  • D1248 – 16 Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
  • D1250 – 08(2013)e1 Standard Guide for Use of the Petroleum Measurement Tables
  • D1252 – 06(2012)e1 Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water
  • D1252-RUS – 06(2012)e1 Стандартные методы определения химического потребления кислорода (бихроматная окисляемость) в воде
  • D1253 – 14 Standard Test Method for Residual Chlorine in Water
  • D1253-RUS – 14 Стандартный метод определения остаточного хлора в воде
  • D1257 – 07(2012) Standard Specification for High-Gravity Glycerin
  • D1259 – 06(2012) Standard Test Methods for Nonvolatile Content of Resin Solutions
  • D1264 – 16 Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases
  • D1264-RUS – 16 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ СТОЙКОСТИ К ВЫМЫВАНИЮ ВОДОЙ ДЛЯ КОНСИСТЕНТНЫХ СМАЗОК
  • D1265 – 11(2017)e1 Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method
  • D1265-RUS – 11(2017)e1 СТАНДАРТНАЯ МЕТОДИКА ОТБОРА ПРОБ СЖИЖЕННЫХ НЕФТЯНЫХ (LP) ГАЗОВ, РУЧНОЙ МЕТОД
  • D1266 – 13 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
  • D1266-RUS – 13 Стандартный метод определения содержания серы в нефтепродуктах (ламповый метод)
  • D1267 – 12 Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)
  • D1267-RUS – 12
  • D1275 – 15 Standard Test Method for Corrosive Sulfur in Electrical Insulating Liquids
  • D1278 – 91a(2015) Standard Test Methods for Rubber from Natural Sources—Chemical Analysis
  • D1278-RUS – 91a(2015) Стандартные методы испытаний каучука природного происхождения — Химический анализ
  • D1280 – 14 Standard Guide for Total Immersion Corrosion Test for Soak Tank Metal Cleaners
  • D1283 – 05(2013) Standard Test Method for Alkali-Solubility of Wools
  • D1287 – 11 Standard Test Method for pH of Engine Coolants and Antirusts
  • D1287-RUS – 11 Стандартный метод определения pH охлаждающих жидкостей и ингибиторов коррозии для двигателей
  • D1290 – 95(2015) Standard Test Method for Sediment in Water-Emulsion Polishes by Centrifuge
  • D1291 – 17 Standard Practice for Estimation of Chlorine Demand of Water
  • D1292 – 15 Standard Test Method for Odor in Water 
  • D1292-RUS – 15 Стандартный метод определения запаха воды
  • D1293 – 18 Standard Test Methods for pH of Water
  • D1294 – 05(2013) Standard Test Method for Tensile Strength and Breaking Tenacity of Wool Fiber Bundles 1-in. (25.4-mm) Gage Length
  • D1296 – 01(2012) Standard Test Method for Odor of Volatile Solvents and Diluents
  • D1298 – 12b(2017) Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
  • D1298-RUS – 12b(2017) СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ ПЛОТНОСТИ, ОТНОСИТЕЛЬНОЙ ПЛОТНОСТИ ИЛИ ПЛОТНОСТИ В ГРАДУСАХ API СЫРОЙ НЕФТИ И ЖИДКИХ НЕФТЕПРОДУКТОВ АРЕОМЕТРОМСТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ ПЛОТНОСТИ, ОТНОСИТЕЛЬНОЙ ПЛОТНОСТИ ИЛИ ПЛОТНОСТИ В ГРАДУСАХ API СЫРОЙ НЕФТИ И ЖИДКИХ НЕФТЕПРОДУКТОВ АРЕОМЕТРОМ
  • D1298-SP – 12b(2017) Método de prueba estándar para determinar la densidad, la densidad relativa o la gravedad API del petróleo crudo y los productos líquidos derivados del petróleo mediante el Método de densímetro
  • D1301 – 91(2014) Standard Test Methods for Chemical Analysis of White Lead Pigments
  • D1304 – 99(2012) Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation
  • D1305 – 16 Standard Specification for Electrical Insulating Paper and Paperboard—Sulfate (Kraft) Layer Type
  • D1308 – 02(2013) Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
  • D1309 – 93(2015) Standard Test Method for Settling Properties of Traffic Paints During Storage
  • D1310 – 14 Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
  • D1310-RUS – 14 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ ТЕМПЕРАТУРЫ ВСПЫШКИ И ТЕМПЕРАТУРЫ ВОСПЛАМЕНЕНИЯ ЖИДКОСТЕЙ В ПРИБОРЕ С ОТКРЫТЫМ ТИГЛЕМ ТАГА
  • D1316 – 06(2011) Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer
  • D1318 – 16 Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)
  • D1319 – 15 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
  • D1319-SP – 15 Método de prueba estándar para tipos de hidrocarburos en derivados del petróleo líquidos mediante adsorción de indicador fluorescente
  • D1321 – 16a Standard Test Method for Needle Penetration of Petroleum Waxes
  • D1322 – 15e1 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel
  • D1322-RUS – 15e1 Стандартный метод определения максимальной высоты некоптящего пламени керосина и авиационного топлива для турбореактивных двигателей
  • D1327/D1327M – 04(2012)e1 Standard Specification for Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing
  • D1329 – 16 Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test)
  • D1330 – 04(2015)e1 Standard Specification for Rubber Sheet Gaskets
  • D1331 – 14 Standard Test Methods for Surface and Interfacial Tension of Solutions of Paints, Solvents, Solutions of Surface-Active Agents, and Related Materials
  • D1335 – 17 Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings
  • D1336 – 07(2015) Standard Test Method for Distortion of Yarn in Woven Fabrics
  • D1337 – 10(2016) Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength
  • D1338 – 99(2016) Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength
  • D1343 – 95(2011) Standard Test Method for Viscosity of Cellulose Derivatives by Ball-Drop Method
  • D1349 – 14 Standard Practice for Rubber—Standard Conditions for Testing
  • D1351 – 14 Standard Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable
  • D1353 – 13 Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
  • D1356 – 17 Standard Terminology Relating to Sampling and Analysis of Atmospheres
  • D1357 – 95(2011) Standard Practice for Planning the Sampling of the Ambient Atmosphere
  • D1363 – 06(2011) Standard Test Method for Permanganate Time of Acetone and Methanol
  • D1363-RUS – 06(2011) Стандартный метод определения перманганатного числа ацетона и метанола
  • D1364 – 02(2012) Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)
  • D1364-RUS – 02(2012) Стандартный метод определения содержания воды в летучих растворителях (метод титрования реактивом Карла Фишера)
  • D1366 – 86(2012) Standard Practice for Reporting Particle Size Characteristics of Pigments
  • D1369 – 84(2012) Standard Practice for Quantities of Materials for Bituminous Surface Treatments
  • D1370/D1370M – 12(2016) Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)
  • D1384 – 05(2012) Standard Test Method for Corrosion Test for Engine Coolants in Glassware
  • D1384-RUS – 05(2012) Стандартные коррозионные испытания охлаждающих жидкостей для двигателя в стеклопосуде
  • D1385 – 07(2013)e1 Standard Test Method for Hydrazine in Water
  • D1385-RUS – 07(2013)e1 Стандартный метод определения гидразина в воде
  • D1386 – 15 Standard Test Method for Acid Number (Empirical) of Synthetic and Natural Waxes
  • D1387 – 89(2012) Standard Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes
  • D1388 – 14e1 Standard Test Method for Stiffness of Fabrics
  • D1394 – 76(2014) Standard Test Methods for Chemical Analysis of White Titanium Pigments
  • D1401 – 12e1 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
  • D1403 – 10 Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment
  • D1403-RUS – 10 Стандартные методы определения конусной пенетрации консистентной смазки с погружением конуса на четверть или половину длины шкалы
  • D1404/D1404M – 99(2014) Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease
  • D1405/D1405M – 08(2013) Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
  • D1405/D1405M-RUS – 08(2013) Стандартный метод оценки низшей теплоты сгорания авиационных топлив
  • D1411 – 09 Standard Test Methods for Water-Soluble Chlorides Present as Admixtures in Graded Aggregate Road Mixes
  • D1412/D1412M – 17a Standard Test Method for Equilibrium Moisture of Coal at 96 to 97 Percent Relative Humidity and 30 °C
  • D1414 – 15 Standard Test Methods for Rubber O-Rings
  • D1415 – 06(2012) Standard Test Method for Rubber Property—International Hardness
  • D1415-RUS – 06(2012) Стандартный метод определения свойства каучука ― твердость по международной шкале
  • D1417 – 16 Standard Test Methods for Rubber Latices—Synthetic
  • D1417-RUS – 16 Стандартные методы испытаний синтетических каучуковых латексов
  • D1418 – 17 Standard Practice for Rubber and Rubber Latices—Nomenclature
  • D1422/D1422M – 13 Standard Test Method for Twist in Single Spun Yarns by the Untwist-Retwist Method
  • D1423/D1423M – 16 Standard Test Method for Twist in Yarns by Direct-Counting
  • D1423/D1423M-RUS – 16 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ КРУТКИ ПРЯЖИ ПУТЕМ ПРЯМОГО ПОДСЧЕТА
  • D1424 – 09(2013)e1 Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus
  • D1425/D1425M – 14 Standard Test Method for Evenness of Textile Strands Using Capacitance Testing Equipment
  • D1426 – 15 Standard Test Methods for Ammonia Nitrogen In Water
  • D1426-RUS – 15 Стандартный метод определения содержания аммиачного азота в воде
  • D1429 – 13 Standard Test Methods for Specific Gravity of Water and Brine
  • D1430 – 17 Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics
  • D1434 – 82(2015)e1 Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
  • D1434-RUS – 82(2015)e1 СТАНДАРТНЫЕ МЕТОДЫ ОПРЕДЕЛЕНИЯ ХАРАКТЕРИСТИК ГАЗОПРОНИЦАЕМОСТИ ПЛЕНОК И ЛИСТОВ ИЗ ПЛАСТИКОВ
  • D1435 – 13 Standard Practice for Outdoor Weathering of Plastics
  • D1436 – 17 Standard Test Methods for Application of Emulsion Floor Polishes to Substrates for Testing Purposes
  • D1439 – 15 Standard Test Methods for Sodium Carboxymethylcellulose
  • D1440 – 07(2012) Standard Test Method for Length and Length Distribution of Cotton Fibers (Array Method)
  • D1441 – 12 Standard Practice for Sampling Cotton Fibers for Testing
  • D1442 – 06(2012) Standard Test Method for Maturity of Cotton Fibers (Sodium Hydroxide Swelling and Polarized Light Procedures)
  • D1445/D1445M – 12 Standard Test Method for Breaking Strength and Elongation of Cotton Fibers (Flat Bundle Method)
  • D1447 – 07(2012)e1 Standard Test Method for Length and Length Uniformity of Cotton Fibers by Photoelectric Measurement
  • D1448 – 11 Standard Test Method for Micronaire Reading of Cotton Fibers
  • D1452/D1452M – 16 Standard Practice for Soil Exploration and Sampling by Auger Borings
  • D1455 – 17 Standard Test Method for 60° Specular Gloss of Emulsion Floor Polish
  • D1456 – 86(2014) Standard Test Method for Rubber Property—Elongation at Specific Stress
  • D1458 – 13 Standard Test Methods for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation
  • D1460 – 86(2014) Standard Test Method for Rubber Property—Change in Length During Liquid Immersion
  • D1461 – 17 Standard Test Method for Moisture or Volatile Distillates in Asphalt Mixtures
  • D1464 – 12 Standard Practice for Differential Dyeing Behavior of Cotton
  • D1465 – 10(2015) Standard Test Method for Blocking and Picking Points of Petroleum Wax
  • D1474/D1474M – 13 Standard Test Methods for Indentation Hardness of Organic Coatings
  • D1475 – 13 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
  • D1476 – 02(2012) Standard Test Method for Heptane Miscibility of Lacquer Solvents
  • D1476-RUS – 02(2012) Стандартный метод определения смешиваемости лакокрасочных растворителей с гептаном
  • D1478 – 11(2017)e1 Standard Test Method for Low-Temperature Torque of Ball Bearing Grease
  • D1480 – 15 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
  • D1481 – 17 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer
  • D1483 – 12(2016) Standard Test Method for Oil Absorption of Pigments by Gardner-Coleman Method
  • D1485 – 07(2015) Standard Practice for Rubber from Natural Sources—Sampling and Sample Preparation
  • D1488 – 00(2013) Standard Test Method for Amylaceous Matter in Adhesives
  • D1489 – 09(2016) Standard Test Method for Nonvolatile Content of Aqueous Adhesives
  • D1490 – 01(2013) Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions
  • D1492 – 13 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration
  • D1492-RUS – 13 Стандартный метод определения бромного числа ароматических углеводородов кулонометрическим титрованием
  • D1494 – 17 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
  • D1498 – 14 Standard Test Method for Oxidation-Reduction Potential of Water
  • D1499 – 13 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics
  • D1500 – 12(2017) Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
  • D1500-RUS – 12(2017) СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ ЦВЕТА НЕФТЕПРОДУКТОВ ПО ASTM (ЦВЕТОВАЯ ШКАЛА ASTM)
  • D1500-SP – 12(2017) Método de prueba estándar para determinación del color de ASTM para productos derivados del petróleo (Escala de color de ASTM)
  • D1505 – 10 Standard Test Method for Density of Plastics by the Density-Gradient Technique
  • D1505-RUS – 10 Стандартный метод определения плотности полимерных материалов с помощью градиентных трубок
  • D1506 – 15 Standard Test Methods for Carbon Black—Ash Content
  • D1508 – 12(2017) Standard Test Method for Carbon Black, Pelleted Fines and Attrition
  • D1509 – 15 Standard Test Methods for Carbon Black—Heating Loss
  • D1509-RUS – 15 Стандартные методы определения потерь при нагревании технического углерода
  • D1510 – 17 Standard Test Method for Carbon Black—Iodine Adsorption Number
  • D1511 – 12(2017) Standard Test Method for Carbon Black—Pellet Size Distribution
  • D1512 – 15b Standard Test Methods for Carbon Black—pH Value
  • D1512-RUS – 15b Стандартные методы испытаний технического углерода  определение значения рН
  • D1513 – 05(2017) Standard Test Method for Carbon Black, Pelleted—Pour Density
  • D1514 – 15 Standard Test Method for Carbon Black—Sieve Residue
  • D1516 – 05(2017) Standard Test Method for Width of Leather
  • D1517 – 15 Standard Terminology Relating to Leather
  • D1518 – 14 Standard Test Method for Thermal Resistance of Batting Systems Using a Hot Plate
  • D1519 – 95(2014) Standard Test Methods for Rubber Chemicals—Determination of Melting Range
  • D1519-RUS – 95(2014) Стандартные методы испытаний химикатов для обработки каучука — Определение интервала плавления
  • D1524 – 15 Standard Test Method for Visual Examination of Used Electrical Insulating Liquids in the Field
  • D1525 – 17e1 Standard Test Method for Vicat Softening Temperature of Plastics
  • D1533 – 12 Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration
  • D1534 – 95(2017) Standard Test Method for Approximate Acidity in Electrical Insulating Liquids by Color-Indicator Titration
  • D1535 – 14 Standard Practice for Specifying Color by the Munsell System
  • D1544 – 04(2010) Standard Test Method for Color of Transparent Liquids (Gardner Color Scale)
  • D1544-RUS – 04(2010) Стандартный метод определения цвета прозрачных жидкостей (по цветовой шкале Гарднера)1
  • D1545 – 13(2017) Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method
  • D1550 – 94(2015) Standard ASTM Butadiene Measurement Tables
  • D1552 – 16e1 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)
  • D1552-RUS – 16e1 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ СЕРЫ В НЕФТЕПРОДУКТАХ С ПОМОЩЬЮ ВЫСОКОТЕМПЕРАТУРНОГО СЖИГАНИЯ И ОБНАРУЖЕНИЯ ПО ИНФРАКРАСНОМУ ИЗЛУЧЕНИЮ ИЛИ ПО ТЕПЛОПРОВОДНОСТИ
  • D1554 – 10(2016) Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials
  • D1555 – 16 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane
  • D1555M – 16 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]
  • D1556/D1556M – 15e1 Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method
  • D1557 – 12e1 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))
  • D1558 – 10 Standard Test Method for Moisture Content Penetration Resistance Relationships of Fine-Grained Soils
  • D1560 – 15 Standard Test Methods for Resistance to Deformation and Cohesion of Asphalt Mixtures by Means of Hveem Apparatus
  • D1561/D1561M – 13 Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor
  • D1562 – 15 Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds (CAP)
  • D1566 – 15 Standard Terminology Relating to Rubber
  • D1568 – 05(2014) Standard Test Methods for Sampling and Chemical Analysis of Alkylbenzene Sulfonates
  • D1569 – 05(2014) Standard Test Methods for Detergent Alkylate
  • D1570 – 95(2016) Standard Test Methods for Sampling and Chemical Analysis of Fatty Alkyl Sulfates
  • D1571/D1571M – 95(2017) Standard Specification for Woven Asbestos Cloth
  • D1573/D1573M – 95(2017) Standard Test Method for Heat Aging of Asbestos Textiles
  • D1574 – 04(2013) Standard Test Method for Extractable Matter in Wool and Other Animal Fibers
  • D1575 – 13 Standard Test Method for Fiber Length of Wool in Scoured Wool and in Card Sliver
  • D1576 – 13 Standard Test Method for Moisture in Wool by Oven-Drying
  • D1577 – 07(2012) Standard Test Methods for Linear Density of Textile Fibers
  • D1578 – 93(2016) Standard Test Method for Breaking Strength of Yarn in Skein Form
  • D1579 – 01(2013) Standard Test Method for Filler Content of Phenol, Resorcinol, and Melamine Adhesives
  • D1582 – 98(2017) Standard Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives
  • D1583 – 01(2013) Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
  • D1585 – 15 Standard Test Methods for Fatty Acids Content of Pine Chemicals, Including Rosin, Tall Oil, and Related Products
  • D1586 – 11 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
  • D1587/D1587M – 15 Standard Practice for Thin-Walled Tube Sampling of Fine-Grained Soils for Geotechnical Purposes
  • D1593 – 13 Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting
  • D1596 – 14 Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material
  • D1598 – 15a Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
  • D1599 – 14e1 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
  • D1600 – 14 Standard Terminology for Abbreviated Terms Relating to Plastics
  • D1601 – 12 Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers
  • D1603 – 14 Standard Test Method for Carbon Black Content in Olefin Plastics
  • D1607 – 91(2011) Standard Test Method for Nitrogen Dioxide Content of the Atmosphere (Griess-Saltzman Reaction)
  • D1608 – 16 Standard Test Method for Oxides of Nitrogen in Gaseous Combustion Products (Phenol-Disulfonic Acid Procedures)
  • D1610 – 01(2013) Standard Practice for Conditioning Leather and Leather Products for Testing
  • D1611 – 12 Standard Test Method for Corrosion Produced by Leather in Contact with Metal
  • D1613 – 17 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
  • D1613-RUS – 17 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ СОДЕРЖАНИЯ КИСЛОТЫ В ЛЕТУЧИХ РАСТВОРИТЕЛЯХ И ХИМИЧЕСКИХ ПОЛУФАБРИКАТАХ, ИСПОЛЬЗУЕМЫХ В КРАСКАХ, ЛАКАХ, ЭМАЛЯХ И РОДСТВЕННЫХ С НИМИ ТОВАРАХ
  • D1614 – 09(2017) Standard Test Method for Alkalinity in Acetone
  • D1617 – 07(2012) Standard Test Method for Ester Value of Solvents and Thinners
  • D1618 – 17 Standard Test Method for Carbon Black Extractables—Transmittance of Toluene Extract
  • D1618-RUS – 17 СТАНДАРТНЫЙ МЕТОД ИСПЫТАНИЙ ВЕЩЕСТВ, ЭКСТРАГИРУЕМЫХ ИЗ ТЕХНИЧЕСКОГО УГЛЕРОДА — ОПРЕДЕЛЕНИЕ КОЭФФИЦИЕНТА ПРОПУСКАНИЯТОЛУОЛЬНОГО ЭКСТРАКТА
  • D1619 – 16a Standard Test Methods for Carbon Black—Sulfur Content
  • D1619-RUS – 16a Стандартные методы определения содержания серы в техническом углероде
  • D1621 – 16 Standard Test Method for Compressive Properties of Rigid Cellular Plastics
  • D1622/D1622M – 14 Standard Test Method for Apparent Density of Rigid Cellular Plastics
  • D1623 – 17 Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics
  • D1630 – 16 Standard Test Method for Rubber Property—Abrasion Resistance (Footwear Abrader)
  • D1631 – 10 Standard Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method
  • D1631-RUS – 10 Стандартный метод определения воды в феноле и родственных материалах методом йодного реактива
  • D1632 – 17 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
  • D1633 – 17 Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders
  • D1634 – 17 Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)
  • D1635/D1635M – 12 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
  • D1636 – 13 Standard Specification for Allyl Molding Compounds
  • D1640/D1640M – 14 Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings
  • D1644 – 01(2017) Standard Test Methods for Nonvolatile Content of Varnishes
  • D1646 – 17 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
  • D1648 – 86(2014) Standard Specification for Basic Lead Silicochromate Pigment
  • D1649 – 01(2012) Standard Specification for Strontium Chromate Pigment
  • D1652 – 11e1 Standard Test Method for Epoxy Content of Epoxy Resins
  • D1652-RUS – 11e1 Стандартный метод определения содержания эпоксидных групп в эпоксидных смолах
  • D1653 – 13 Standard Test Methods for Water Vapor Transmission of Organic Coating Films
  • D1654 – 08(2016)e1 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
  • D1655 – 18 Standard Specification for Aviation Turbine Fuels
  • D1657 – 12(2017) Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
  • D1662 – 08(2014) Standard Test Method for Active Sulfur in Cutting Oils
  • D1665 – 98(2014) Standard Test Method for Engler Specific Viscosity of Tar Products
  • D1666 – 17 Standard Test Methods for Conducting Machining Tests of Wood and Wood-Base Panel Materials
  • D1667 – 17 Standard Specification for Flexible Cellular Materials—Poly (Vinyl Chloride) Foam (Closed-Cell)
  • D1668/D1668M – 97a(2014)e1 Standard Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing
  • D1669/D1669M – 07(2013)e1 Standard Practice for Preparation of Test Panels for Accelerated and Outdoor Weathering of Bituminous Coatings
  • D1670/D1670M – 11 Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
  • D1675 – 03(2011) Standard Test Methods for Polytetrafluoroethylene Tubing
  • D1676 – 17 Standard Test Methods for Film-Insulated Magnet Wire
  • D1677 – 17 Standard Methods for Sampling and Testing Untreated Mica Paper Used for Electrical Insulation
  • D1681 – 05(2014) Standard Test Method for Synthetic Anionic Active Ingredient in Detergents by Cationic Titration Procedure
  • D1683/D1683M – 17e1 Standard Test Method for Failure in Sewn Seams of Woven Fabrics
  • D1684 – 07(2012) Standard Practice for Lighting Cotton Classing Rooms for Color Grading
  • D1686 – 10 Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)
  • D1686-RUS – 10 Стандартный метод испытаний на цветность твердых ароматических углеводородов и родственных материалов в расплавленном состоянии (платино-кобальтовая шкала)
  • D1687 – 17 Standard Test Methods for Chromium in Water
  • D1688 – 17 Standard Test Methods for Copper in Water
  • D1691 – 17 Standard Test Methods for Zinc in Water
  • D1693 – 15 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
  • D1695 – 07(2012) Standard Terminology of Cellulose and Cellulose Derivatives
  • D1696 – 95(2011) Standard Test Method for Solubility of Cellulose in Sodium Hydroxide
  • D1708 – 13 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
  • D1709 – 16ae1 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
  • D1710 – 15 Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes
  • D1711 – 15 Standard Terminology Relating to Electrical Insulation
  • D1712 – 09(2014) Standard Practice for Resistance of Plastics to Sulfide Staining
  • D1718 – 09(2017) Standard Specification for Isobutyl Acetate (95 % Grade)
  • D1719 – 11 Standard Specification for Isobutyl Alcohol
  • D1720 – 03(2012) Standard Test Method for Dilution Ratio of Active Solvents in Cellulose Nitrate Solutions
  • D1722 – 09(2017) Standard Test Method for Water Miscibility of Water-Soluble Solvents
  • D1725 – 12 Standard Practice for Preparing Resin Solutions for Viscosity Measurement by Bubble Time Method
  • D1726 – 11 Standard Test Methods for Hydrolyzable Chloride Content of Liquid Epoxy Resins
  • D1726-RUS – 11 Стандартные методы определения содержания гидролизуемых хлоридов в жидких эпоксидных смолах
  • D1729 – 16 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
  • D1730 – 09(2014) Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
  • D1731 – 09(2014) Standard Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting
  • D1732 – 03(2013) Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting
  • D1734 – 93(2013) Standard Practice for Making Cementitious Panels for Testing Coatings
  • D1735 – 14 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
  • D1739 – 98(2017) Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)
  • D1742 – 06(2013) Standard Test Method for Oil Separation from Lubricating Grease During Storage
  • D1742-RUS – 06(2013) Стандартный метод испытаний консистентной смазки на выделение масла во время хранения
  • D1743 – 13 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
  • D1743-RUS – 13 Стандартный метод определения антикоррозионных свойств консистентных смазок
  • D1746 – 15 Standard Test Method for Transparency of Plastic Sheeting
  • D1747 – 09(2014) Standard Test Method for Refractive Index of Viscous Materials
  • D1747-RUS – 09(2014) СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ КОЭФФИЦИЕНТА ПРЕЛОМЛЕНИЯ ВЯЗКИХ МАТЕРИАЛОВ
  • D1748 – 10(2015) Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet
  • D1751 – 04(2013)e1 Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)
  • D1752 – 04a(2013) Standard Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction
  • D1754/D1754M – 09(2014) Standard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
  • D1754/D1754M-RUS – 09(2014) Стандартный метод испытаний воздействия тепла и воздуха на битумные материалы (испытание тонкого слоя на тепловое старение)
  • D1755 – 15 Standard Specification for Poly(Vinyl Chloride) Resins
  • D1761 – 12 Standard Test Methods for Mechanical Fasteners in Wood
  • D1762 – 84(2013) Standard Test Method for Chemical Analysis of Wood Charcoal
  • D1763 – 00(2013) Standard Specification for Epoxy Resins
  • D1765 – 17 Standard Classification System for Carbon Blacks Used in Rubber Products
  • D1765-RUS – 17 СТАНДАРТНАЯ СИСТЕМА КЛАССИФИКАЦИИ ТЕХНИЧЕСКОГО УГЛЕРОДА, ИСПОЛЬЗУЕМОГО В РЕЗИНОВЫХ ТЕХНИЧЕСКИХ ИЗДЕЛИЯХ
  • D1766 – 05(2016) Standard Test Method for Rubber Chemicals—Solubility
  • D1767 – 89(2017) Standard Test Method for Ethylene Diamine Tetraacetate (EDTA) in Soaps or Synthetic Detergents
  • D1768 – 89(2016) Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption
  • D1770 – 94(2012)e1 Standard Test Method for Neps, Vegetable Matter, and Colored Fiber in Wool Top
  • D1776/D1776M – 16 Standard Practice for Conditioning and Testing Textiles
  • D1776/D1776M-RUS – 16 Стандартная методика кондиционирования и испытания текстильных материалов
  • D1777 – 96(2015) Standard Test Method for Thickness of Textile Materials
  • D1777-RUS – 96(2015) СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ ТОЛЩИНЫ ТЕКСТИЛЬНЫХ МАТЕРИАЛОВ
  • D1779 – 98(2017) Standard Specification for Adhesive for Acoustical Materials
  • D1780 – 05(2012) Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives
  • D1781 – 98(2012) Standard Test Method for Climbing Drum Peel for Adhesives
  • D1782 – 17 Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials
  • D1783 – 01(2012)e1 Standard Test Methods for Phenolic Compounds in Water
  • D1783-RUS – 01(2012)e1 Стандартные методы определения содержания фенольных соединений в воде
  • D1784 – 11 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
  • D1785 – 15 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
  • D1786 – 16 Standard Specification for Toluene Diisocyanate
  • D1790 – 14 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
  • D1791 – 93(2015) Standard Test Method for Accelerated Aging of Liquid Water-Emulsion Floor Polishes
  • D1792 – 17 Standard Test Method for Long-Term Removability Properties of Emulsion Floor Polishes
  • D1793 – 17 Standard Test Method for Water Spotting of Emulsion Floor Polishes
  • D1795 – 13 Standard Test Method for Intrinsic Viscosity of Cellulose
  • D1796 – 11(2016) Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
  • D1796-RUS – 11(2016) Стандартный метод определения воды и осадка в жидком топливе методом центрифугирования (лабораторная процедура)
  • D1796-SP – 11(2016) Método de prueba estándar para determinación de agua y sedimentos en fuelóleos mediante el Método de centrifugación (Procedimiento de Laboratorio)
  • D1799 – 03a(2014) Standard Practice for Carbon Black—Sampling Packaged Shipments
  • D1799-RUS – 03a(2014) Стандартная методика отбора проб тарно-груженого технического углерода
  • D1813 – 13(2017) Standard Test Method for Measuring Thickness of Leather Test Specimens
  • D1814 – 70(2015) Standard Test Method for Measuring Thickness of Leather Units
  • D1815 – 00(2015) Standard Test Method for Water Absorption (Static) of Vegetable Tanned Leather
  • D1816 – 12 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using VDE Electrodes
  • D1817 – 05(2016) Standard Test Method for Rubber Chemicals—Density
  • D1822 – 13 Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
  • D1823 – 16 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
  • D1824 – 16 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
  • D1826 – 94(2017) Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
  • D1828 – 01(2013) Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures
  • D1830 – 17 Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
  • D1831 – 11 Standard Test Method for Roll Stability of Lubricating Grease
  • D1831-RUS – 11 Стандартный метод определения стабильности качения для смазочного масла
  • D1833 – 87(2017) Standard Test Method for Odor of Petroleum Wax
  • D1835 – 16 Standard Specification for Liquefied Petroleum (LP) Gases
  • D1836 – 07(2013) Standard Specification for Commercial Hexanes
  • D1838 – 16 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases
  • D1839 – 14 Standard Test Method for Amyl Nitrate in Diesel Fuels
  • D1840 – 07(2017) Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
  • D1844 – 86(2014) Standard Test Methods for Chemical Analysis of Basic Lead Silicochromate
  • D1845 – 86(2014) Standard Test Methods for Chemical Analysis of Strontium Chromate Pigment
  • D1849 – 95(2014)e1 Standard Test Method for Package Stability of Paint
  • D1856 – 09(2015) Standard Test Method for Recovery of Asphalt From Solution by Abson Method
  • D1857/D1857M – 17a Standard Test Method for Fusibility of Coal and Coke Ash
  • D1863/D1863M – 05(2011)e1 Standard Specification for Mineral Aggregate Used on Built-Up Roofs
  • D1864/D1864M – 89(2017) Standard Test Method for Moisture in Mineral Aggregate Used on Built-Up Roofs
  • D1865/D1865M – 09(2017) Standard Test Method for Hardness of Mineral Aggregate Used on Built-Up Roofs
  • D1867 – 13 Standard Specification for Copper-Clad Thermosetting Laminates for Printed Wiring
  • D1868 – 13 Standard Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems
  • D1869 – 15 Standard Specification for Rubber Rings for Fiber-Reinforced Cement Pipe
  • D1871 – 04(2014) Standard Test Method for Adhesion Between Tire Bead Wire and Rubber
  • D1871-RUS – 04(2014) Стандартный метод определения сцепления бортовой проволоки шины с резиной
  • D1874 – 16 Standard Specification for Water- or Solvent-Soluble Liquid Adhesives for Automatic Machine Sealing of Top Flaps of Fiberboard Shipping Cases
  • D1875 – 03(2013) Standard Test Method for Density of Adhesives in Fluid Form
  • D1876 – 08(2015)e1 Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)
  • D1879 – 06(2014) Standard Practice for Exposure of Adhesive Specimens to Ionizing Radiation
  • D1881 – 17 Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
  • D1882 – 17 Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
  • D1883 – 16 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
  • D1886 – 14 Standard Test Methods for Nickel in Water
  • D1886-RUS – 14 Стандартные методы определения содержания никеля в воде
  • D1890 – 15(2017) Standard Test Method for Beta Particle Radioactivity of Water
  • D1894 – 14 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
  • D1894-RUS – 14 Стандартный метод определения статического и кинетического коэффициентов трения для пленок и листовых покрытий из пластмассы
  • D1895 – 17 Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials
  • D1896/D1896M – 10(2017) Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds
  • D1900 – 06(2015) Standard Practice for Carbon Black—Sampling Bulk Shipments
  • D1900-RUS – 06(2015) Стандартная методика отбора проб бестарно-груженого технического углерода
  • D1901 – 10(2015) Standard Test Method for Relative Evaporation Time of Halogenated Organic Solvents and Their Admixtures
  • D1903 – 08(2017) Standard Practice for Determining the Coefficient of Thermal Expansion of Electrical Insulating Liquids of Petroleum Origin, and Askarels
  • D1907/D1907M – 12 Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
  • D1909 – 13 Standard Tables of Commercial Moisture Regains and Commercial Allowances for Textile Fibers
  • D1912 – 00(2016) Standard Test Method for Cold-Crack Resistance of Upholstery Leather
  • D1913 – 00(2015) Standard Test Method for Resistance to Wetting of Garment-Type Leathers (Spray Test)
  • D1914 – 95(2014) Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres
  • D1917 – 03(2017) Standard Test Methods for Rubber Property—Shrinkage of Raw and Compounded Hot-Polymerized Styrene-Butadiene Rubber (SBR)
  • D1918/D1918M – 95(2017) Standard Test Method for Asbestos Content of Asbestos Textiles
  • D1921 – 12 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
  • D1921-RUS – 12 Стандартные методы определения размера частиц (ситовый гранулометрический анализ) для пластмасс
  • D1922 – 15 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
  • D1926 – 00(2011) Standard Test Methods for Carboxyl Content of Cellulose
  • D1929 – 16 Standard Test Method for Determining Ignition Temperature of Plastics
  • D1932 – 13 Standard Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes
  • D1933 – 03(2017) Standard Specification for Nitrogen Gas as an Electrical Insulating Material
  • D1934 – 95(2012) Standard Test Method for Oxidative Aging of Electrical Insulating Petroleum Oils by Open-Beaker Method
  • D1937 – 13 Standard Test Method for Carbon Black, Pelleted—Mass Strength
  • D1938 – 14 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
  • D1941 – 91(2013) Standard Test Method for Open Channel Flow Measurement of Water with the Parshall Flume
  • D1943 – 05(2012) Standard Test Method for Alpha Particle Radioactivity of Water 
  • D1945 – 14 Standard Test Method for Analysis of Natural Gas by Gas Chromatography
  • D1945-RUS – 14 Стандартный метод анализа природного газа с помощью газовой хроматографии
  • D1946 – 90(2015)e1 Standard Practice for Analysis of Reformed Gas by Gas Chromatography
  • D1946-RUS – 90(2015)e1 Стандартная методика анализа нефтезаводского газа с помощью газовой хроматографии
  • D1968 – 15 Standard Terminology Relating to Paper and Paper Products
  • D1969 – 07(2012) Standard Specification for 2-Ethylhexanol
  • D1970/D1970M – 17a Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection
  • D1971 – 16 Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry
  • D1974/D1974M – 16 Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes
  • D1975 – 16 Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails
  • D1976 – 12 Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy
  • D1977 – 16 Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis
  • D1977-RUS – 16 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ НИКЕЛЯ И ВАНАДИЯ В РАВНОВЕСНЫХ КАТАЛИЗАТОРАХ ФЛЮИДИЗИРОВАННОГО КАТАЛИТИЧЕСКОГО КРЕКИНГА (ФКК) С ПОМОЩЮ РАЗЛОЖЕНИЯ ФТОРИСТОВОДОРОДНОЙ/СЕРНОЙ КИСЛОТОЙ ИАТОМНО-СПЕКТРОСКОПИЧЕСКОГО АНАЛИЗА
  • D1978 – 91(2014) Standard Guide for Analysis of Electrocoat Bath Samples
  • D1981 – 11(2015) Standard Test Method for Measuring Color After Heating of Tall Oil Fatty Acids
  • D1982 – 13(2017) Standard Test Method for Titer of Fatty Acids
  • D1985 – 13 Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks
  • D1986 – 14 Standard Test Method for Determining the Apparent Viscosity of Polyethylene Wax
  • D1987 – 07(2016) Standard Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters
  • D1988 – 06(2015) Standard Test Method for Mercaptans in Natural Gas Using Length-of-Stain Detector Tubes
  • D1990 – 16 Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens
  • D1991 – 15 Standard Test Method for Rubber Chemicals—2-Mercaptobenzothiazole (MBT)—Assay
  • D1992 – 17 Standard Guide for Testing Synthetic Plasticizers Used in Rubber
  • D1993 – 03(2013)e1 Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
  • D1994 – 07(2015) Standard Test Method for Determination of Acid Numbers of Hot-Melt Adhesives
  • D1995 – 92(2017) Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives)
  • D1997 – 13 Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass
  • D1998 – 15 Standard Specification for Polyethylene Upright Storage Tanks
  • D2000 – 12(2017) Standard Classification System for Rubber Products in Automotive Applications
  • D2001 – 07(2017) Standard Test Method for Depentanization of Gasoline and Naphthas
  • D2007 – 11(2016) Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
  • D2007-RUS – 11(2016) СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ ХАРАКТЕРИСТИЧЕСКИХ ГРУПП МАСЕЛ ДЛЯ НАПОЛНЕНИЯ И ОБРАБОТКИ КАУЧУКА И ДРУГИХ МАСЕЛ НЕФТЯНОГО ПРОИСХОЖДЕНИЯ С ПОМОЩЬЮ ХРОМАТОГРАФИЧЕСКОГО МЕТОДА АБСОРБЦИИ НА ГЛИНЕ-ГЕЛЕ
  • D2008 – 12 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
  • D2008-RUS – 12 Стандартный метод определения способности ультрафиолетового поглощения и коэффициента поглощения нефтепродуктов
  • D2010/D2010M – 98(2017) Standard Test Methods for Evaluation of Total Sulfation Activity in the Atmosphere by the Lead Dioxide Technique
  • D2013/D2013M – 12 Standard Practice for Preparing Coal Samples for Analysis
  • D2013/D2013M-RUS – 12 Стандартная методика приготовления проб угля для анализа
  • D2014 – 97(2010) Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven
  • D2022 – 89(2016) Standard Test Methods of Sampling and Chemical Analysis of Chlorine-Containing Bleaches
  • D2023 – 89(2016) Standard Test Method of Analysis for Sodium Toluene Sulfonate in Detergents
  • D2024 – 09(2017) Standard Test Method for Cloud Point of Nonionic Surfactants
  • D2026/D2026M – 15 Standard Specification for Cutback Asphalt (Slow-Curing Type)
  • D2027/D2027M – 13 Standard Specification for Cutback Asphalt (Medium-Curing Type)
  • D2028/D2028M – 15 Standard Specification for Cutback Asphalt (Rapid-Curing Type)
  • D2029 – 97(2017) Standard Test Methods for Water Vapor Content of Electrical Insulating Gases by Measurement of Dew Point
  • D2035 – 13 Standard Practice for Coagulation-Flocculation Jar Test of Water
  • D2036 – 09(2015) Standard Test Methods for Cyanides in Water
  • D2036-RUS – 09(2015) СТАНДАРТНЫЕ МЕТОДЫ ОПРЕДЕЛЕНИЯ СОДЕРЖАНИЯ ЦИАНИДОВ В ВОДЕ
  • D2041/D2041M – 11 Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
  • D2042 – 15 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene
  • D2042-RUS – 15 Стандартный метод определения растворимости битумных материалов в трихлорэтилене
  • D2047 – 11 Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine
  • D2048 – 17 Standard Test Method for Powdering of Floor Polish Films
  • D2050 – 11e1 Standard Terminology Relating to Fasteners and Closures Used with Textiles
  • D2051 – 14 Standard Test Method for Durability of Finish of Zippers to Laundering
  • D2052 – 05(2015) Standard Test Method for Colorfastness of Zippers to Drycleaning
  • D2053 – 99(2015) Standard Test Method for Colorfastness of Zippers to Light
  • D2054 – 99(2015) Standard Test Method for Colorfastness of Zipper Tapes to Crocking
  • D2057 – 05(2015) Standard Test Method for Colorfastness of Zippers to Laundering
  • D2058 – 03(2014) Standard Test Method for Durability of Finish of Zippers to Drycleaning
  • D2059/D2059M – 03(2014) Standard Test Method for Resistance of Zippers to Salt Spray (Fog)
  • D2060 – 14e1 Standard Test Methods for Measuring Zipper Dimensions
  • D2061 – 07(2013) Standard Test Methods for Strength Tests for Zippers
  • D2062 – 03(2014) Standard Test Methods for Operability of Zippers
  • D2063/D2063M – 10(2012) Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures Using Non-Automated (Manual) Torque Testing Equipment
  • D2064 – 91(2016) Standard Test Method for Print Resistance of Architectural Paints
  • D2065 – 03(2017) Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress
  • D2066 – 07(2012) Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions
  • D2067 – 97(2013) Standard Test Method for Coarse Particles in Printing Ink Dispersions
  • D2068 – 17 Standard Test Method for Determining Filter Blocking Tendency
  • D2070 – 16e1 Standard Test Method for Thermal Stability of Hydraulic Oils
  • D2074 – 07(2013) Standard Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method
  • D2084 – 17 Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter
  • D2086 – 08(2012) Standard Test Method for Acidity in Vinyl Acetate and Acetaldehyde
  • D2087 – 06(2012) Standard Test Method for Iron in Formaldehyde Solutions
  • D2091 – 96(2017) Standard Test Method for Print Resistance of Lacquers
  • D2093 – 03(2017) Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding
  • D2094 – 00(2014) Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests
  • D2095 – 96(2015) Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
  • D2096 – 11 Standard Test Method for Colorfastness and Transfer of Color in the Washing of Leather
  • D2097 – 03(2016) Standard Test Method for Flex Testing of Finish on Upholstery Leather
  • D2098 – 13 Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Dow Corning Leather Tester
  • D2099 – 14 Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Maeser Water Penetration Tester
  • D2100/D2100M – 95(2017) Standard Specification for Asbestos Textiles Used for Electrical Insulating Purposes
  • D2102 – 02(2012)e1 Standard Test Method for Shrinkage of Textile Fibers (Bundle Test)
  • D2103 – 15 Standard Specification for Polyethylene Film and Sheeting
  • D2105 – 01(2014) Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
  • D2106 – 07(2017) Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents
  • D2108 – 10(2015) Standard Test Method for Color of Halogenated Organic Solvents and Their Admixtures (Platinum-Cobalt Scale)
  • D2108-RUS – 10(2015) Стандартный метод определения цвета галогенированных органических растворителей и их примесей (платинокобальтовая шкала)
  • D2109 – 01(2016) Standard Test Methods for Nonvolatile Matter in Halogenated Organic Solvents and Their Admixtures
  • D2109-RUS – 01(2016) Стандартные методы определения содержания нелетучих компонентов в галогенированных органических растворителях и их смесях
  • D2110 – 00(2017) Standard Test Method for pH of Water Extractions of Halogenated Organic Solvents and Their Admixtures
  • D2111 – 10(2015) Standard Test Methods for Specific Gravity and Density of Halogenated Organic Solvents and Their Admixtures
  • D2112 – 15 Standard Test Method for Oxidation Stability of Inhibited Mineral Insulating Oil by Pressure Vessel
  • D2113 – 14 Standard Practice for Rock Core Drilling and Sampling of Rock for Site Exploration
  • D2115 – 17 Standard Practice for Oven Heat Stability of Poly(Vinyl Chloride) Compositions
  • D2116 – 16 Standard Specification for FEP Resin Molding and Extrusion Materials
  • D2121 – 16 Standard Test Methods for Polymer Content of Styrene Monomer
  • D2122 – 16 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
  • D2124 – 99(2011) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
  • D2126 – 15 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
  • D2129 – 17 Standard Test Method for Color of Clear Electrical Insulating Liquids (Platinum-Cobalt Scale)
  • D2130 – 13 Standard Test Method for Diameter of Wool and Other Animal Fibers by Microprojection
  • D2131 – 97(2016) Standard Classification for Natural Muscovite Mica Splittings
  • D2132 – 12 Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
  • D2134 – 93(2012) Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker
  • D2136 – 02(2012) Standard Test Method for Coated Fabrics—Low-Temperature Bend Test
  • D2137 – 11 Standard Test Methods for Rubber Property – Brittleness Point of Flexible Polymers and Coated Fabrics
  • D2137-RUS – 11 Стандартные методы определения свойств резины — температура хрупкости эластичных полимеров и материалов споверхностным покрытием
  • D2140 – 08(2017) Standard Practice for Calculating Carbon-Type Composition of Insulating Oils of Petroleum Origin
  • D2140-RUS – 08(2017) СТАНДАРТНАЯ МЕТОДИКА РАСЧЕТА УГЛЕРОДИСТЫХ СОСТАВОВ ДЛЯ ЭЛЕКТРОИЗОЛЯЦИОННЫХ МАСЕЛ, ИЗГОТОВЛЯЕМЫХ НА ОСНОВЕ НЕФТЕПРОДУКТОВ
  • D2143 – 15 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
  • D2144 – 07(2013) Standard Practices for Examination of Electrical Insulating Oils by Infrared Absorption
  • D2148 – 13 Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation
  • D2149 – 13 Standard Test Method for Permittivity (Dielectric Constant) And Dissipation Factor Of Solid Ceramic Dielectrics At Frequencies To 10 MHz And Temperatures To 500°C
  • D2152 – 17 Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
  • D2155 – 12 Standard Test Method for Determination of Fire Resistance of Aircraft Hydraulic Fluids by Autoignition Temperature
  • D2156 – 09(2013) Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels
  • D2157 – 94(2013) Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases from Burning Distillate Fuels
  • D2158 – 16a Standard Test Method for Residues in Liquefied Petroleum (LP) Gases
  • D2161 – 17 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
  • D2161-RUS – 17 СТАНДАРТНАЯ МЕТОДИКА ПРЕОБРАЗОВАНИЯ КИНЕМАТИЧЕСКОЙ ВЯЗКОСТИ В ВЯЗКОСТЬ В УНИВЕРСАЛЬНЫХ СЕКУНДАХ СЕЙБОЛТА ИЛИ В ВЯЗКОСТЬ ПО СЕЙБОЛТУ-ФУРОЛЮ
  • D2162 – 17 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards
  • D2162-RUS – 17 СТАНДАРТНАЯ МЕТОДИКА ОСНОВНОЙ КАЛИБРОВКИ ОБРАЗЦОВЫХ ВИСКОЗИМЕТРОВ И ЭТАЛОНОВ ВЯЗКОСТИ МАСЛА
  • D2163 – 14e1 Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography
  • D2163-RUS – 14e1 Стандартный метод определения содержания углеводородов в сжиженных нефтяных газах и смесях пропана/пропилена с помощью газовой хроматографии
  • D2165 – 94(2012)e1 Standard Test Method for pH of Aqueous Extracts of Wool and Similar Animal Fibers
  • D2166/D2166M – 16 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
  • D2167 – 15 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
  • D2168 – 10 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
  • D2170/D2170M – 10 Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens)
  • D2170/D2170M-RUS – 10 Стандартный метод определения кинематической вязкости асфальтов (битумов)
  • D2171/D2171M – 10 Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
  • D2171/D2171M-RUS – 10 Стандартный метод измерения вязкости битумов с помощью вакуумного капиллярного вискозиметра
  • D2172/D2172M – 17 Standard Test Methods for Quantitative Extraction of Asphalt Binder from Asphalt Mixtures
  • D2176 – 16 Standard Test Method for Folding Endurance of Paper and Plastics Film by the M.I.T. Tester
  • D2178/D2178M – 15a Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing
  • D2180 – 17 Standard Test Method for Active Oxygen in Bleaching Compounds
  • D2187 – 17 Standard Test Methods and Practices for Evaluating Physical and Chemical Properties of Particulate Ion-Exchange Resins
  • D2190 – 07(2013) Standard Specification for Vinyl Acetate
  • D2191 – 06(2012) Standard Test Method for Acetaldehyde Content of Vinyl Acetate
  • D2192 – 06(2012) Standard Test Method for Purity of Aldehydes and Ketones
  • D2193 – 06(2012) Standard Test Method for Hydroquinone in Vinyl Acetate
  • D2194 – 02(2012) Standard Test Method for Concentration of Formaldehyde Solutions
  • D2196 – 15 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
  • D2196-RUS – 15 Стандартные методы определения реологических свойств неньютоновских материалов с помощью ротационного вискозиметра
  • D2197 – 16 Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
  • D2199 – 03(2013) Standard Test Method for Measurement of Plasticizer Migration From Vinyl Fabrics to Lacquers
  • D2200 – 17 Standard Practice for Use of Pictorial Surface Preparation Standards and Guides for Painting Steel Surfaces
  • D2201 – 99(2011) Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products
  • D2202 – 00(2014) Standard Test Method for Slump of Sealants
  • D2203 – 01(2018) Standard Test Method for Staining from Sealants
  • D2205 – 15 Standard Guide for Selection of Tests for Traffic Paints
  • D2207 – 00(2015) Standard Test Method for Bursting Strength of Leather by the Ball Method
  • D2208 – 16 Standard Test Method for Breaking Strength of Leather by the Grab Method
  • D2209 – 00(2015) Standard Test Method for Tensile Strength of Leather
  • D2210 – 13 Standard Test Method for Grain Crack and Extension of Leather by the Mullen Test
  • D2211 – 00(2015) Standard Test Method for Elongation of Leather
  • D2212 – 00(2015) Standard Test Method for Slit Tear Resistance of Leather
  • D2213 – 00(2016) Standard Test Method for Compressibility of Leather
  • D2216 – 10 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
  • D2218 – 67(2012) Standard Specification for Molybdate Orange Pigments
  • D2219 – 17 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60°C Operation
  • D2220 – 17 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75°C Operation
  • D2221 – 01(2015) Standard Test Method for Creep Properties of Package Cushioning Materials
  • D2222 – 14 Standard Test Method for Methanol Extract of Vinyl Chloride Resins
  • D2225 – 04(2012) Standard Test Methods for Silicone Fluids Used for Electrical Insulation
  • D2226 – 93(2012) Standard Classification for Various Types of Petroleum Oils for Rubber Compounding Use
  • D2227 – 96(2015) Standard Specification for Natural Rubber (NR) Technical Grades
  • D2228 – 04(2015) Standard Test Method for Rubber Property—Relative Abrasion Resistance by Pico Abrader Method
  • D2229 – 10(2014) Standard Test Method for Adhesion Between Steel Tire Cords and Rubber
  • D2229-RUS – 10(2014) СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ СЦЕПЛЕНИЯ МЕТАЛЛИЧЕСКИХ ШИННЫХ КОРДОВ С РЕЗИНОЙ
  • D2230 – 17 Standard Test Method for Rubber Property—Extrudability of Unvulcanized Compounds
  • D2232 – 14 Test Method for Evaporation Residue of Naphthalene
  • D2234/D2234M – 17 Standard Practice for Collection of a Gross Sample of Coal
  • D2235 – 04(2016) Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
  • D2238 – 92(2012)e1 Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm−1
  • D2239 – 12a Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
  • D2240 – 15e1 Standard Test Method for Rubber Property—Durometer Hardness
  • D2241 – 15 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
  • D2243 – 95(2014) Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings
  • D2244 – 16 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
  • D2247 – 15 Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity
  • D2248 – 01a(2013) Standard Practice for Detergent Resistance of Organic Finishes
  • D2251 – 10(2015) Standard Test Method for Metal Corrosion by Halogenated Organic Solvents and Their Admixtures
  • D2255/D2255M – 09(2013)e1 Standard Test Method for Grading Spun Yarns for Appearance
  • D2256/D2256M – 10(2015) Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method
  • D2257 – 98(2012) Standard Test Method for Extractable Matter in Textiles
  • D2258/D2258M – 16 Standard Practice for Sampling Yarn for Testing
  • D2259 – 02(2016) Standard Test Method for Shrinkage of Yarns
  • D2260 – 03(2013) Standard Tables of Conversion Factors and Equivalent Yarn Numbers Measured in Various Numbering Systems
  • D2261 – 13(2017)e1 Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
  • D2265 – 15 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range
  • D2266 – 01(2015) Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)
  • D2266-RUS – 01(2015) Стандартный метод определения противоизносных характеристик консистентных смазок (метод четырех шариков)
  • D2268 – 93(2017) Standard Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography
  • D2269 – 10(2015) Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
  • D2269-RUS – 10(2015) СТАНДАРТНЫЙ МЕТОД ОЦЕНКИ СОДЕРЖАНИЯ СВЕТЛЫХ МИНЕРАЛЬНЫХ МАСЕЛ ПО ПОГЛОЩЕНИЮ УЛЬТРАФИОЛЕТОВОГО ИЗЛУЧЕНИЯ
  • D2270 – 10(2016) Standard Practice for Calculating Viscosity Index from Kinematic Viscosity at 40 °C and 100 °C
  • D2270-RUS – 10(2016) Стандартная методика расчета индекса вязкости по кинематической вязкости при температуре 40°С и 100°С
  • D2272 – 14a Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
  • D2272-RUS – 14a Стандартный метод определения окислительной стабильности масел для паровых турбин методом вращения сосудов высокого давления
  • D2273 – 08(2016) Standard Test Method for Trace Sediment in Lubricating Oils
  • D2274 – 14 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
  • D2274-RUS – 14 Стандартный метод определения стойкости к окислению дистиллятного нефтяного топлива (ускоренный метод)
  • D2275 – 14 Standard Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface
  • D2276 – 06(2014) Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
  • D2276-RUS – 06(2014) Стандартный метод определения загрязненности авиационного топлива твердыми частицами с помощью выборочного контроля на производственной линии
  • D2281 – 10(2016) Standard Test Method for Evaluation of Wetting Agents by the Skein Test
  • D2284 – 11 Standard Test Method for Acidity of Sulfur Hexafluoride
  • D2287 – 12 Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
  • D2290 – 16 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
  • D2291/D2291M – 16 Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites
  • D2293 – 96(2016) Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)
  • D2294 – 96(2016) Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
  • D2295 – 96(2016) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
  • D2300 – 08(2017) Standard Test Method for Gassing of Electrical Insulating Liquids Under Electrical Stress and Ionization (Modified Pirelli Method)
  • D2301 – 10(2017) Standard Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
  • D2303 – 13 Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials
  • D2304 – 10 Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials
  • D2305 – 10 Standard Test Methods for Polymeric Films Used for Electrical Insulation
  • D2307 – 07a(2013) Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire
  • D2308 – 07(2013) Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
  • D2318 – 15 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch
  • D2319/D2319M – 14e1 Standard Test Method for Softening Point of Pitch (Cube-in-Air Method)
  • D2320 – 98(2017) Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)
  • D2321 – 14e1 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
  • D2322 – 14 Standard Test Method for Resistance of Shoe Upper Leather to Artificial Perspiration
  • D2331 – 08(2013) Standard Practices for Preparation and Preliminary Testing of Water-Formed Deposits
  • D2332 – 13 Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence
  • D2337 – 01(2014) Standard Test Method for Freeze-Thaw Stability of Multicolor Lacquers
  • D2338 – 02(2013) Standard Test Method for Determining Particle Size of Multicolor Lacquers
  • D2339 – 98(2017) Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
  • D2340 – 18 Standard Test Method for Peroxides in Styrene Monomer
  • D2343 – 17 Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics
  • D2344/D2344M – 16 Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
  • D2344/D2344M-RUS – 16 Стандартный метод испытаний многослойной короткой балки, изготовленной из полимерных матричных композитных материалов
  • D2346 – 13 Standard Test Method for Apparent Density of Leather
  • D2347 – 00(2015) Standard Test Method for Measuring Area of Leather Test Specimens
  • D2349 – 90(2014) Standard Test Method for Qualitative Determination of Nature of Solvent Composition in Solvent-Reducible Paints
  • D2350 – 90(2015) Standard Test Method for Antimony Oxide in White Pigment Separated From Solvent-Reducible Paints
  • D2351 – 90(2015) Standard Test Method for Sulfide in White Pigment Separated from Solvent-Reducible Paints
  • D2352 – 85(2015) Standard Test Method for Sulfur Dioxide in White Pigment Separated from Solvent-Reducible Paints
  • D2354 – 10e1 Standard Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles
  • D2357 – 11(2016) Standard for Qualitative Classification of Surfactants by Infrared Absorption
  • D2358 – 16 Standard Test Method for Separation of Active Ingredient from Surfactant and Syndet Compositions
  • D2359 – 17 Standard Specification for Refined Benzene-535
  • D2363 – 79(2011) Standard Test Methods for Hydroxypropyl Methylcellulose
  • D2364 – 15 Standard Test Methods for Hydroxyethylcellulose
  • D2369 – 10(2015)e1 Standard Test Method for Volatile Content of Coatings
  • D2370 – 16 Standard Test Method for Tensile Properties of Organic Coatings
  • D2371 – 85(2010) Standard Test Method for Pigment Content of Solvent-Reducible Paints
  • D2372 – 85(2015) Standard Practice for Separation of Vehicle From Solvent-Reducible Paints
  • D2377 – 14 Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants
  • D2378 – 07(2012) Standard Specification for Formaldehyde 50 % Grade Uninhibited and 37 % Grade Inhibited and Uninhibited
  • D2379 – 09(2017) Standard Test Method for Acidity of Formaldehyde Solutions
  • D2380 – 04(2011) Standard Test Method for Methanol Content of Formaldehyde Solutions
  • D2383 – 14 Standard Practice for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions
  • D2384 – 83(2014) Standard Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures
  • D2384-RUS – 83(2014) Стандартные методы определения следов летучих хлоридов в бутан-бутеновых смесях
  • D2386 – 15e1 Standard Test Method for Freezing Point of Aviation Fuels
  • D2386-RUS – 15e1 Стандартный метод определения температуры замерзания авиационных топлив
  • D2392 – 15 Standard Test Method for Color of Dyed Aviation Gasolines
  • D2392-RUS – 15 Стандартный метод определения цвета окрашенных авиационных бензинов
  • D2394 – 17 Standard Test Methods for Simulated Service Testing of Wood and Wood-Based Finish Flooring
  • D2395 – 17 Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials
  • D2396 – 94(2012) Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
  • D2397/D2397M – 17 Standard Specification for Cationic Emulsified Asphalt
  • D2399 – 12(2017)e1 Standard Practice for Selection of Cutback Asphalts
  • D2402 – 07(2012) Standard Test Method for Water Retention of Textile Fibers (Centrifuge Procedure)
  • D2412 – 11 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
  • D2413 – 16 Standard Practice for Preparation of Insulating Paper and Board Impregnated with a Liquid Dielectric
  • D2414 – 17 Standard Test Method for Carbon Black—Oil Absorption Number (OAN)
  • D2415 – 15 Standard Test Method for Ash in Coal Tar and Pitch
  • D2416 – 84(2015)e1 Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson)
  • D2419 – 14 Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
  • D2420 – 13 Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)
  • D2420-RUS – 13 Стандартный метод определения содержания сероводорода в сжиженном нефтяном (LP) газе (метод с использованием ацетата свинца)
  • D2421 – 13 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis
  • D2422 – 97(2013) Standard Classification of Industrial Fluid Lubricants by Viscosity System
  • D2423 – 90(2017) Standard Test Method for Surface Wax on Waxed Paper or Paperboard
  • D2425 – 17 Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry
  • D2426 – 93(2014) Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography
  • D2426-RUS – 93(2014) СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ БУТАДИЕНОВОГО ДИМЕРА И СТИРОЛА В КОНЦЕНТРАТАХ БУТАДИЕНА С ПОМОЩЬЮ ГАЗОВОЙ ХРОМАТОГРАФИИ
  • D2427 – 06(2015) Standard Test Method for Determination of C2 through C5 Hydrocarbons in Gasolines by Gas Chromatography
  • D2435/D2435M – 11 Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
  • D2439 – 16 Standard Specification for Refined Phenol
  • D2440 – 13 Standard Test Method for Oxidation Stability of Mineral Insulating Oil
  • D2442 – 75(2016) Standard Specification for Alumina Ceramics for Electrical and Electronic Applications
  • D2444 – 99(2010) Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
  • D2448 – 85(2012) Standard Test Method for Water-Soluble Salts in Pigments by Measuring the Specific Resistance of the Leachate of the Pigment
  • D2449 – 88(2015) Standard Specification for Rubber Bales From Natural Sources—Limit on Coating
  • D2452 – 15 Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds
  • D2453 – 15 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
  • D2454 – 14 Standard Practice for Determining the Effect of Overbaking on Organic Coatings
  • D2457 – 13 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
  • D2457-RUS – 13 Стандартный метод определения зеркального блеска пластмассовых пленок и твердых пластмасс
  • D2460 – 07(2013) Standard Test Method for Alpha-Particle-Emitting Isotopes of Radium in Water
  • D2462 – 13 Standard Test Method for Moisture in Wool by Distillation With Toluene
  • D2463 – 15 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
  • D2464 – 15 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
  • D2466 – 17 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
  • D2467 – 15 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
  • D2472 – 15 Standard Specification for Sulfur Hexafluoride
  • D2475 – 01(2013) Standard Specification for Felt
  • D2477 – 07(2012) Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies
  • D2484 – 06(2012)e1 Standard Specification for Polyester Film Pressure-Sensitive Electrical Insulating Tape
  • D2485 – 91(2013) Standard Test Methods for Evaluating Coatings For High Temperature Service
  • D2486 – 17 Standard Test Methods for Scrub Resistance of Wall Paints
  • D2487 – 11 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
  • D2488 – 17 Standard Practice for Description and Identification of Soils (Visual-Manual Procedures)
  • D2489/D2489M – 16 Standard Test Method for Estimating Degree of Particle Coating of Asphalt Mixtures
  • D2492 – 02(2012) Standard Test Method for Forms of Sulfur in Coal
  • D2493/D2493M – 16 Standard Practice for Viscosity-Temperature Chart for Asphalt Binders
  • D2494 – 13 Standard Test Method for Commercial Mass of a Shipment of Yarn or Manufactured Staple Fiber or Tow
  • D2495 – 07(2012) Standard Test Method for Moisture in Cotton by Oven-Drying
  • D2497 – 07(2012) Standard Tolerances for Manufactured Organic-Base Filament Single Yarns
  • D2500 – 17a Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
  • D2501 – 14 Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
  • D2501-RUS – 14 Стандартный метод расчета вязкостно-весовой константы (ВВК) нефтяных масел
  • D2502 – 14 Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements
  • D2503 – 92(2016) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
  • D2504 – 88(2015) Standard Test Method for Noncondensable Gases in C2 and Lighter Hydrocarbon Products by Gas Chromatography
  • D2504-RUS – 88(2015) Стандартный метод определения содержания неконденсирующихся газов в C2 и более легких углеводородных продуктах с помощью газовой хроматографии
  • D2505 – 88(2015) Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography
  • D2505-RUS – 88(2015) Стандартный метод определения этилена, других углеводородов и углекислого газа в этилене высокой степени чистоты с помощью газовой хроматографии
  • D2509 – 14e1 Standard Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method)
  • D2510 – 94(2017) Standard Test Method for Adhesion of Solid Film Lubricants
  • D2511 – 93(2014) Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants
  • D2512 – 17 Standard Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques)
  • D2513 – 16a Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
  • D2517 – 06(2011) Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
  • D2519 – 07(2012) Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test
  • D2520 – 13 Standard Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1650oC
  • D2521/D2521M – 76(2014)e1 Standard Specification for Asphalt Used in Canal, Ditch, and Pond Lining
  • D2523 – 13 Standard Practice for Testing Load-Strain Properties of Roofing Membranes
  • D2524 – 13 Standard Test Method for Breaking Tenacity of Wool Fibers, Flat Bundle Method— 18-in. (3.2-mm) Gage Length
  • D2525 – 13 Standard Practice for Sampling Wool for Moisture
  • D2527 – 83(2017) Standard Specification for Rubber Seals—Splice Strength
  • D2532 – 17 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
  • D2534 – 88(2017) Standard Test Method for Coefficient of Kinetic Friction for Wax Coatings
  • D2538 – 02(2010) Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer
  • D2549 – 02(2017) Standard Test Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography
  • D2555 – 17a Standard Practice for Establishing Clear Wood Strength Values
  • D2556 – 14 Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties Using Rotational Viscometry
  • D2557 – 98(2017) Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from −267.8 to −55°C (−450 to −67°F)
  • D2559 – 12ae1 Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions
  • D2561 – 17 Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers
  • D2562 – 94(2015) Standard Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics
  • D2563 – 08(2015) Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts
  • D2564 – 12 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
  • D2565 – 16 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications
  • D2570 – 16 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
  • D2570-RUS – 16 Стандартный метод коррозионных испытаний охлаждающих жидкостей двигателя в имитированных условиях эксплуатации
  • D2572 – 97(2010) Standard Test Method for Isocyanate Groups in Urethane Materials or Prepolymers
  • D2573/D2573M – 15 Standard Test Method for Field Vane Shear Test in Saturated Fine-Grained Soils
  • D2574 – 16 Standard Test Method for Resistance of Emulsion Paints in the Container to Attack by Microorganisms
  • D2578 – 17 Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films
  • D2580 – 06(2012) Standard Test Method for Phenols in Water by Gas-Liquid Chromatography
  • D2582 – 16 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting
  • D2583 – 13a Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
  • D2584 – 11 Standard Test Method for Ignition Loss of Cured Reinforced Resins
  • D2589/D2589M – 88(2011)e1 Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber
  • D2590/D2590M – 98(2011)e1 Standard Test Method for Sampling Chrysotile Asbestos
  • D2591 – 07(2013) Standard Test Method for Linear Density of Elastomeric Yarns (Short Length Specimens)
  • D2593 – 93(2014) Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography
  • D2594 – 04(2016) Standard Test Method for Stretch Properties of Knitted Fabrics Having Low Power
  • D2595 – 17 Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range
  • D2596 – 15 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
  • D2596-RUS – 15 Стандартный метод измерения противозадирных свойств консистентной смазки (метод четырех шариков)
  • D2598 – 16 Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis
  • D2603 – 01(2013) Standard Test Method for Sonic Shear Stability of Polymer-Containing Oils
  • D2603-RUS – 01(2013) СТАНДАРТНЫЙ МЕТОД ИСПЫТАНИЙ НА СОПРОТИВЛЕНИЕ ЗВУКОВОМУ СДВИГУ ПОЛИМЕРСОДЕРЖАЩИХ МАСЕЛ
  • D2609 – 15 Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
  • D2612 – 99(2011) Standard Test Method for Fiber Cohesion in Sliver and Top (Static Tests)
  • D2613 – 01(2017) Standard Test Method for Calcium or Zinc in Paint Driers by EDTA Method
  • D2616 – 12 Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale
  • D2617 – 17a Standard Test Method for Total Ash in Leather
  • D2619 – 09(2014) Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)
  • D2619-RUS – 09(2014) Стандартный метод испытания гидравлических жидкостей на гидролитическую устойчивость (с использованием бутылки для питьевой воды)
  • D2621 – 87(2016) Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
  • D2622 – 16 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
  • D2622-RUS – 16 Стандартный метод определения содержания серы в нефтепродуктах с помощью волновой дисперсионной рентгеновской флуоресцентной спектрометрии
  • D2622-SP – 16 Método de prueba estándar para determinación de azufre en productos derivados del petróleo mediante espectrofluorimetría de rayos X por dispersión de longitud de onda
  • D2624 – 15 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
  • D2624-SP – 15 Método de prueba estándar para determinación de la conductividad eléctrica de combustibles destilados y para aviación
  • D2625 – 94(2015) Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method)
  • D2626/D2626M – 04(2012)e1 Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing
  • D2627 – 08(2012) Standard Specification for Diacetone Alcohol
  • D2628 – 91(2016) Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
  • D2632 – 15 Standard Test Method for Rubber Property—Resilience by Vertical Rebound
  • D2633 – 13a Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
  • D2634 – 07(2013) Standard Specification for Methyl Amyl Acetate (95 % Grade)
  • D2635 – 07(2012) Standard Specification for Methyl Isobutyl Carbinol
  • D2636 – 07(2012) Standard Specification for Hexylene Glycol
  • D2638 – 10(2015)e1 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer
  • D2638-RUS – 10(2015)e1 Стандартный метод определения истинной плотности прокаленного нефтяного кокса гелиевым пикнометром
  • D2639/D2639M – 16 Standard Test Method for Plastic Properties of Coal by the Constant-Torque Gieseler Plastometer
  • D2643/D2643M – 08(2013)e1 Standard Specification for Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type)
  • D2644 – 12 Standard Tolerances for Yarns Spun on the Woolen System
  • D2645 – 07(2012) Standard Tolerances for Yarns Spun on the Cotton or Worsted Systems
  • D2646 – 18 Standard Guide for Backing Fabric Characteristics of Pile Yarn Floor Coverings
  • D2647 – 10 Standard Specification for Crosslinkable Ethylene Plastics
  • D2649 – 04(2014) Standard Test Method for Corrosion Characteristics of Solid Film Lubricants
  • D2650 – 10(2015) Standard Test Method for Chemical Composition of Gases by Mass Spectrometry
  • D2651 – 01(2016) Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding
  • D2652 – 11 Standard Terminology Relating to Activated Carbon
  • D2653 – 07(2012) Standard Test Method for Tensile Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
  • D2655 – 17 Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V
  • D2656 – 13 Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35 000 V
  • D2657 – 07(2015) Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings
  • D2658 – 04(2013) Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method)
  • D2659 – 16 Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers
  • D2661 – 14 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
  • D2663 – 14 Standard Test Methods for Carbon Black—Dispersion in Rubber
  • D2665 – 14 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
  • D2668 – 07(2013) Standard Test Method for 2,6-di-tert-Butyl- p-Cresol and 2,6-di-tert-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption
  • D2669 – 16 Standard Test Method for Apparent Viscosity of Petroleum Waxes Compounded with Additives (Hot Melts)
  • D2670 – 95(2016) Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method)
  • D2670-RUS – 95(2016) СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ ПРОТИВОИЗНОСНЫХ СВОЙСТВ ЖИДКИХ СМАЗОЧНЫХ МАТЕРИАЛОВ (МЕТОД ШТИФТА И V-ОБРАЗНЫХ БЛОКОВ ФАЛЕКСА)
  • D2671 – 13 Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use
  • D2672 – 14 Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement
  • D2673 – 14 Standard Specification for Oriented Polypropylene Film
  • D2674 – 72(2012) Standard Methods of Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum
  • D2680 – 01(2014) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
  • D2683 – 14 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
  • D2684/D2684M – 15 Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products
  • D2685 – 11 Standard Test Method for Air and Carbon Tetrafluoride in Sulfur Hexafluoride by Gas Chromatography
  • D2686 – 06(2012) Standard Specification for Polytetrafluoroethylene-Backed Pressure-Sensitive Electrical Insulating Tape
  • D2687 – 95(2016) Standard Practices for Sampling Particulate Ion-Exchange Materials
  • D2688 – 15e1 Standard Test Method for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Method)
  • D2692/D2692M – 15 Standard Test Method for Air Permeability of Tire Fabrics, Tire Cord Fabrics, Tire Cord, and Yarns
  • D2693 – 07(2012) Standard Specification for Ethylene Glycol
  • D2694 – 05(2011) Standard Specification for Diethylene Glycol
  • D2697 – 03(2014) Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
  • D2698 – 05(2015) Standard Test Method for Determination of the Pigment Content of Solvent-Reducible Paints by High-Speed Centrifuging
  • D2699 – 17 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
  • D2699-SP – 17 Método de prueba estándar para número de octano de investigación de combustibles para motores de ignición por chispa
  • D2700 – 17 Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
  • D2700-SP – 17 Método de prueba estándar para número de octano de combustibles para motores de ignición por chispa
  • D2702 – 05(2016) Standard Practice for Rubber Chemicals—Determination of Infrared Absorption Characteristics
  • D2709 – 16 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
  • D2709-SP – 16 Método de prueba estándar para agua y sedimentos en combustibles de destilación intermedia con centrifugador
  • D2710 – 09(2013) Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration
  • D2710-RUS – 09(2013) Стандартный метод определения бромного числа углеводородов нефти с помощью потенциометрического титрования
  • D2711 – 17 Standard Test Method for Demulsibility Characteristics of Lubricating Oils
  • D2711-RUS – 17 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ ДЕЭМУЛЬГИРУЮЩИХ ХАРАКТЕРИСТИК СМАЗОЧНЫХ МАСЕЛ
  • D2712 – 18 Standard Test Method for Determination of Hydrocarbon Impurities in High Purity Propylene by Gas Chromatography
  • D2713 – 15 Standard Test Method for Dryness of Propane (Valve Freeze Method)
  • D2714 – 94(2014) Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine
  • D2718 – 00(2011)e1 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
  • D2719 – 13 Standard Test Methods for Structural Panels in Shear Through-the-Thickness
  • D2720 – 94(2012)e1 Standard Practice for Calculation of Commercial Weight and Yield of Scoured Wool, Top, and Noil for Various Commercial Compositions
  • D2724 – 07(2015) Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics
  • D2726/D2726M – 17 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures
  • D2728 – 98(2014) Standard Practice for Paving Uses and Application Temperatures for Road Tars
  • D2729 – 17 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
  • D2731 – 15 Standard Test Method for Elastic Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
  • D2732 – 14 Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
  • D2734 – 16 Standard Test Methods for Void Content of Reinforced Plastics
  • D2737 – 12a Standard Specification for Polyethylene (PE) Plastic Tubing
  • D2739 – 97(2017) Standard Test Method for Volume Resistivity of Conductive Adhesives
  • D2745 – 00(2017) Standard Test Method for Relative Tinting Strength of White Pigments by Reflectance Measurements
  • D2746 – 07(2013) Standard Test Method for Staining Tendency of Asphalt (Stain Index)
  • D2749 – 13 Standard Symbols for Dimensions of Plastic Pipe Fittings
  • D2752/D2752M – 88(2011)e1 Standard Test Methods for Air Permeability of Asbestos Fibers
  • D2754 – 10(2016) Standard Specification for High-Temperature Glass Cloth Pressure-Sensitive Electrical Insulating Tape
  • D2756 – 07(2017) Standard Test Method for Weight Loss of Electrical Insulating Varnishes
  • D2758 – 94(2009) Standard Test Method for Engine Coolants by Engine Dynamometer
  • D2759 – 00(2017) Standard Practice for Sampling Gas from a Transformer Under Positive Pressure
  • D2764 – 99(2015)e1 Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch
  • D2765 – 16 Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics
  • D2774 – 12 Standard Practice for Underground Installation of Thermoplastic Pressure Piping
  • D2777 – 13 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
  • D2777-RUS – 13 Стандартная методика определения сходимости и систематической погрешности методов испытаний, находящихся в ведении Комитета D19 по воде
  • D2779 – 92(2012) Standard Test Method for Estimation of Solubility of Gases in Petroleum Liquids
  • D2779-RUS – 92(2012) Стандартный метод оценки растворимости газов в жидких нефтепродуктах
  • D2782 – 17 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method)
  • D2783 – 03(2014) Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
  • D2786 – 91(2016) Standard Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry
  • D2786-RUS – 91(2016) Стандартный метод анализа типов углеводородов во фракциях насыщенных газойлей методом масс-спектрометрии с ионизацией высоким напряжением1
  • D2789 – 95(2016) Standard Test Method for Hydrocarbon Types in Low Olefinic Gasoline by Mass Spectrometry
  • D2791 – 13 Standard Test Method for On-line Determination of Sodium in Water
  • D2792 – 17 Standard Practice for Solvent and Fuel Resistance of Traffic Paint
  • D2793 – 99(2017) Standard Test Method for Block Resistance of Organic Coatings on Wood Panel Substrates
  • D2794 – 93(2010) Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
  • D2794-RUS – 93(2010) Стандартный метод испытаний для определения устойчивости органических покрытий к воздействию быстрой деформации (удару)
  • D2797/D2797M – 11a Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
  • D2798 – 11a Standard Test Method for Microscopical Determination of the Vitrinite Reflectance of Coal
  • D2799 – 13 Standard Test Method for Microscopical Determination of the Maceral Composition of Coal
  • D2802 – 14 Standard Specification for Ozone-Resistant Ethylene-Alkene Polymer Insulation for Wire and Cable
  • D2803 – 09(2015) Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal
  • D2804 – 02(2012) Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography
  • D2804-RUS – 02(2012) Стандартный метод испытаний для определения чистоты метилэтилкетона с помощью газовой хроматографии
  • D2805 – 11 Standard Test Method for Hiding Power of Paints by Reflectometry
  • D2807 – 17a Standard Test Method for Chromic Oxide in Leather (Perchloric Acid Oxidation)
  • D2809 – 09(2017) Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
  • D2810 – 13 Standard Test Method for pH of Leather
  • D2812 – 07(2012) Standard Test Method for Non-Lint Content of Cotton
  • D2813 – 03(2013) Standard Practice for Sampling Leather for Physical and Chemical Tests
  • D2821 – 14 Standard Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus
  • D2824/D2824M – 13 Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, and Fibered without Asbestos
  • D2825 – 17 Standard Terminology Relating to Polishes and Related Materials
  • D2827 – 13 Standard Specification for Styrene Monomer
  • D2829 – 07(2013) Standard Practice for Sampling and Analysis of Existing Built-Up Roof Systems
  • D2832 – 92(2016) Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings
  • D2834 – 95(2015) Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes
  • D2835 – 89(2017) Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
  • D2837 – 13e1 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
  • D2839 – 16 Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene
  • D2842 – 12 Standard Test Method for Water Absorption of Rigid Cellular Plastics
  • D2843 – 16 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
  • D2844/D2844M – 13 Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils
  • D2846/D2846M – 17b Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
  • D2847 – 15 Standard Practice for Testing Engine Coolants in Car and Light Truck Service
  • D2850 – 15 Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
  • D2851 – 15 Standard Specification for Liquid Optical Adhesive
  • D2852 – 16 Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings
  • D2854 – 09(2014) Standard Test Method for Apparent Density of Activated Carbon
  • D2855 – 15 Standard Practice for the Two-Step (Primer and Solvent Cement) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets
  • D2857 – 16 Standard Practice for Dilute Solution Viscosity of Polymers
  • D2859 – 16 Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials
  • D2860/D2860M – 17 Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90° Angle and Constant Stress
  • D2861 – 14 Standard Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics
  • D2862 – 16 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
  • D2863 – 17a Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
  • D2864 – 17a Standard Terminology Relating to Electrical Insulating Liquids and Gases
  • D2866 – 11 Standard Test Method for Total Ash Content of Activated Carbon
  • D2867 – 17 Standard Test Methods for Moisture in Activated Carbon
  • D2868 – 17 Standard Test Method for Nitrogen Content (Kjeldahl) and Hide Substance Content of Leather, Wet Blue and Wet White
  • D2872 – 12e1 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
  • D2872-RUS – 12e1 Стандартный метод измерения воздействия тепла и воздуха на движущуюся пленку битума (испытание на укатывание тонкой пленки в печи)
  • D2875 – 00(2016) Standard Test Method for Insoluble Ash of Vegetable-Tanned Leather
  • D2876 – 00(2016) Standard Test Method for Water-Soluble Matter of Vegetable-Tanned Leather
  • D2878 – 10(2016) Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils
  • D2879 – 10 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
  • D2880 – 15 Standard Specification for Gas Turbine Fuel Oils
  • D2881 – 12(2014) Standard Classification for Metalworking Fluids and Related Materials
  • D2885 – 13 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
  • D2887 – 16a Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
  • D2887-RUS – 16a Стандартный метод определения интервалов температур кипения нефтяных фракций с помощью газовой хроматографии
  • D2889 – 95(2015) Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels
  • D2890 – 92(2013) Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels
  • D2892 – 17a Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
  • D2892-RUS – 17a СТАНДАРТНЫЙ МЕТОД ПЕРЕГОНКИ СЫРОЙ НЕФТИ (РЕКТИФИКАЦИОННАЯ КОЛОННА С 15ТЕОРЕТИЧЕСКИМИ ТАРЕЛКАМИ)
  • D2893 – 04(2014)e1 Standard Test Method for Oxidation Characteristics of Extreme-Pressure Lubrication Oils
  • D2896 – 15 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
  • D2896-RUS – 15 Стандартный метод определения щелочного числа нефтепродуктов потенциометрическим титрованием хлорной кислотой
  • D2898 – 10(2017) Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
  • D2899 – 12(2017) Standard Practice for Establishing Allowable Stresses for Round Timber Piles
  • D2902 – 00(2013)e1 Standard Specification for Fluoropolymer Resin Heat-Shrinkable Tubing for Electrical Insulation
  • D2903 – 11 Standard Specification for Crosslinked Chlorinated Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
  • D2908 – 91(2017) Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography
  • D2911/D2911M – 16 Standard Specification for Dimensions and Tolerances for Plastic Bottles
  • D2913 – 14 Standard Test Method for Mercaptan Content of the Atmosphere
  • D2914 – 15 Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method)
  • D2915 – 17 Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products
  • D2916 – 09(2017) Standard Specification for Isophorone
  • D2917 – 07(2013) Standard Specification for Methyl Isoamyl Ketone
  • D2918 – 99(2012) Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel
  • D2919 – 01(2014) Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
  • D2921 – 98(2017) Standard Test Method for Qualitative Tests for the Presence of Water Repellents and Preservatives in Wood Products
  • D2924 – 12(2017) Standard Test Method for External Pressure Resistance of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • D2925 – 14 Standard Test Method for Beam Deflection of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow
  • D2929 – 89(2011) Standard Test Method for Sulfur Content of Cellulosic Materials by X-Ray Fluorescence
  • D2937 – 17e1 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
  • D2940/D2940M – 15 Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports
  • D2941 – 13 Standard Test Method for Measuring Break Pattern of Leather (Break Scale)
  • D2942 – 02(2013) Standard Test Method for Total Acid Acceptance of Halogenated Organic Solvents (Nonreflux Methods)
  • D2944 – 14 Standard Practice of Sampling Processed Peat Materials
  • D2946 – 01(2010) Standard Terminology for Asbestos and Asbestos-Cement Products
  • D2947/D2947M – 88(2011)e1 Standard Test Method for Screen Analysis of Asbestos Fibers
  • D2949 – 10 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
  • D2950/D2950M – 14 Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods
  • D2959 – 95(2017) Standard Test Method for Ethylene Oxide Content of Polyethoxylated Nonionic Surfactants
  • D2961/D2961M – 17 Standard Test Method for Single-Stage Total Moisture Less than 15 % in Coal Reduced to 2.36-mm (No. 8 Sieve) Topsize
  • D2962 – 10 Standard Practice for Calculating Volume-Temperature Correction For Coal-Tar Pitches
  • D2967 – 07(2017) Standard Test Method for Corner Coverage of Powder Coatings
  • D2968 – 13 Standard Test Method for Med and Kemp Fibers in Wool and Other Animal Fibers by Microprojection
  • D2969 – 04(2014) Standard Test Methods for Steel Tire Cords
  • D2969-RUS – 04(2014) СТАНДАРТНЫЕ МЕТОДЫ ИСПЫТАНИЙ ШИННОГО МЕТАЛЛОКОРДА
  • D2970/D2970M – 04(2014) Standard Test Methods for Testing Tire Cords, Tire Cord Fabrics, and Industrial Yarns Made From Glass Filaments
  • D2972 – 15 Standard Test Methods for Arsenic in Water
  • D2973 – 16 Standard Test Method for Total Nitrogen in Peat Materials
  • D2974 – 14 Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils
  • D2976 – 15 Standard Test Method for pH of Peat Materials
  • D2977 – 14 Standard Practice for Particle Size Range of Peat Materials for Horticultural Purposes
  • D2978 – 15 Standard Test Methods for Volume of Processed Peat Materials
  • D2979 – 16 Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine
  • D2980 – 17 Standard Test Method for Saturated Density, Moisture-Holding Capacity, and Porosity of Saturated Peat Materials
  • D2981 – 94(2014) Standard Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion
  • D2982 – 07(2013) Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils
  • D2983 – 17 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
  • D2983-RUS – 17 СТАНДАРТНЫЙ МЕТОД ИСПЫТАНИЙ ДЛЯ ОПРЕДЕЛЕНИЯ НИЗКОТЕМПЕРАТУРНОЙ ВЯЗКОСТИ ЖИДКОСТЕЙ ДЛЯ АВТОМАТИЧЕСКИХ ТРАНСМИССИЙ, ЖИДКОСТЕЙ ДЛЯ ГИДРОСИСТЕМ И СМАЗОЧНЫХ МАТЕРИАЛОВ С ПОМОЩЬЮ РОТАЦИОННОГО ВИСКОЗИМЕТРА
  • D2985/D2985M – 92(2011)e1 Standard Test Method for Color of Asbestos
  • D2987/D2987M – 88(2011)e1 Standard Test Method for Moisture Content of Asbestos Fiber
  • D2988 – 96(2015) Standard Test Methods for Water-Soluble Halide Ion in Halogenated Organic Solvents and Their Admixtures
  • D2989 – 01(2016) Standard Test Method for Acidity-Alkalinity of Halogenated Organic Solvents and Their Admixtures
  • D2990 – 17 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
  • D2992 – 12 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
  • D2992-RUS – 12 Стандартная методика получения исходного расчетного значения гидростатического напряжения/давления для армированных стекловолокном (фибергласовых) труб и фитингов из термореактивных смол
  • D2995 – 14 Standard Practice for Estimating Application Rate and Residual Application Rate of Bituminous Distributors
  • D2996 – 17 Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • D2997 – 15 Standard Specification for Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • D3003 – 01(2016) Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
  • D3004 – 08(2013) Standard Specification for Crosslinked and Thermoplastic Extruded Semi-Conducting, Conductor and Insulation Shielding Materials
  • D3005 – 17 Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
  • D3006 – 10(2017) Standard Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape
  • D3012 – 13 Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven
  • D3012-RUS – 13 Стандартный метод определения термоокислительной стойкости полипропилена вращением образца в печи
  • D3013 – 13 Standard Specification for Epoxy Molding Compounds
  • D3014 – 11 Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position
  • D3016 – 97(2010) Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships
  • D3018/D3018M – 11(2017) Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
  • D3019/D3019M – 17 Standard Specification for Lap Cement Used with Asphalt Roll Roofing, Non-Fibered, and Fibered
  • D3021 – 01(2012) Standard Specification for Phthalocyanine Green Pigments
  • D3022 – 84(2011) Standard Test Method for Color and Strength of Color Pigments by Use of a Miniature Sandmill
  • D3023 – 98(2017) Standard Practice for Determination of Resistance of Factory-Applied Coatings on Wood Products to Stains and Reagents
  • D3025 – 07(2012) Standard Practice for Standardizing Cotton Fiber Test Results by Use of Calibration Cotton Standards
  • D3030 – 17 Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins
  • D3032 – 16 Standard Test Methods for Hookup Wire Insulation
  • D3034 – 16 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
  • D3035 – 15 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
  • D3038 – 93(2010) Standard Test Method for Drop Shatter Test for Coke
  • D3039/D3039M – 17 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
  • D3042 – 17 Standard Test Method for Insoluble Residue in Carbonate Aggregates
  • D3043 – 00(2011) Standard Test Methods for Structural Panels in Flexure
  • D3044 – 16 Standard Test Method for Shear Modulus of Wood-Based Structural Panels
  • D3045 – 92(2010) Standard Practice for Heat Aging of Plastics Without Load
  • D3048 – 89(2016) Standard Test Method of Assay for Alkaline Protease
  • D3049 – 89(2016) Standard Test Method for Synthetic Anionic Ingredient by Cationic Titration
  • D3050 – 07(2015) Standard Guide for Measuring Soil Removal from Artificially Soiled Fabrics (Not Suitable for Detergent Ranking)
  • D3052 – 17 Standard Practice for Rating Water-Emulsion Floor Polishes
  • D3053 – 17a Standard Terminology Relating to Carbon Black
  • D3056 – 14 Standard Test Method for Gel Time of Solventless Varnishes
  • D3060 – 94(2013) Standard Test Method for Pressure Drop Rate of Compressed Gas-Propelled Products
  • D3061 – 97(2013) Standard Guide for Three-Piece Steel and Tinplate Straight-Wall and Necked-In Aerosol Cans
  • D3064 – 97(2013) Standard Terminology Relating To Aerosol Products
  • D3065 – 01(2013) Standard Test Methods for Flammability of Aerosol Products
  • D3069 – 94(2013) Standard Test Method for Delivery Rate of Aerosol Products
  • D3070 – 00(2010) Standard Test Method of Rapid Pressure Determination of Pressurized Products
  • D3076 – 00(2010) Standard Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers
  • D3078 – 02(2013) Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission
  • D3080/D3080M – 11 Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions
  • D3082 – 15 Standard Test Method for Boron in Water
  • D3084 – 05(2012) Standard Practice for Alpha-Particle Spectrometry of Water
  • D3087 – 17 Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal
  • D3089 – 97(2017) Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
  • D3090 – 72(2016) Standard Practice for Storage Testing of Aerosol Products
  • D3091 – 72(2016) Standard Practice for Safe Filling of Low-Pressure Pressurized Products
  • D3094 – 00(2010) Standard Test Method for Seepage Rate of Aerosol Products
  • D3103 – 14 Standard Test Method for Thermal Insulation Performance of Distribution Packages
  • D3104 – 14a Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method)
  • D3105 – 17 Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials
  • D3106 – 07(2012) Standard Test Method for Permanent Deformation of Elastomeric Yarns
  • D3107 – 07(2015) Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
  • D3108/D3108M – 13 Standard Test Method for Coefficient of Friction, Yarn to Solid Material
  • D3111 – 10 Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method
  • D3115 – 95(2014) Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear
  • D3120 – 08(2014) Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
  • D3120-RUS – 08(2014) Стандартный метод определения микропримесей серы в легких жидких углеводородах нефти с помощью окислительной микрокулонометрии
  • D3121 – 17 Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball
  • D3122 – 15 Standard Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings
  • D3123 – 09(2017) Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds
  • D3124 – 98(2011) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
  • D3125 – 06(2012) Standard Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid
  • D3125-RUS – 06(2012) Стандартный метод определения содержания монометилового эфира гидрохинона в бесцветных мономерных акрилатных эфирах и акриловой кислоте
  • D3128 – 07(2013) Standard Specification for 2-Methoxyethanol
  • D3130 – 11 Standard Specification for n-Propyl Acetate (96 % Grade)
  • D3131 – 07(2013) Standard Specification for Isopropyl Acetate (99 % Grade)
  • D3134 – 15 Standard Practice for Establishing Color and Gloss Tolerances
  • D3135 – 12 Standard Specification for Performance of Bonded, Fused, and Laminated Apparel Fabrics
  • D3136 – 14e1 Standard Terminology Relating to Care Labeling for Apparel, Textile, Home Furnishing, and Leather Products
  • D3137 – 81(2013) Standard Test Method for Rubber Property—Hydrolytic Stability
  • D3138 – 04(2016) Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components
  • D3139 – 98(2011) Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
  • D3141/D3141M – 15 Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements
  • D3142/D3142M – 17 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
  • D3143/D3143M – 13 Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
  • D3144 – 00(2013)e1 Standard Specification for Crosslinked Poly(Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical Insulation
  • D3145 – 13 Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method
  • D3147 – 06(2013) Standard Test Method for Testing Stop-Leak Additives for Engine Coolants
  • D3149 – 06(2013) Standard Specification for Crosslinked Polyolefin Heat-Shrinkable Tubing for Electrical Insulation
  • D3150 – 11 Standard Specification for Crosslinked and Noncrosslinked Poly(Vinyl Chloride) Heat-Shrinkable Tubing for Electrical Insulation
  • D3153 – 17 Standard Test Method for Recoatability of Water-Emulsion Floor Polishes
  • D3154 – 14 Standard Test Method for Average Velocity in a Duct (Pitot Tube Method)
  • D3155 – 11 Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures
  • D3156 – 96(2016) Standard Practice for Rubber—Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers)
  • D3157 – 05(2015) Standard Test Method for Rubber from Natural Sources—Color
  • D3159 – 15 Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials
  • D3160 – 16 Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (α–Methylstyrene)
  • D3161/D3161M – 16a Standard Test Method for Wind-Resistance of Steep Slope Roofing Products (Fan-Induced Method)
  • D3162 – 12 Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
  • D3163 – 01(2014) Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
  • D3164 – 03(2017) Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
  • D3165 – 07(2014) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
  • D3166 – 99(2012) Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
  • D3167 – 10(2017) Standard Test Method for Floating Roller Peel Resistance of Adhesives
  • D3168 – 85(2016) Standard Practice for Qualitative Identification of Polymers in Emulsion Paints
  • D3170/D3170M – 14 Standard Test Method for Chipping Resistance of Coatings
  • D3171 – 15 Standard Test Methods for Constituent Content of Composite Materials
  • D3172 – 13 Standard Practice for Proximate Analysis of Coal and Coke
  • D3172-RUS – 13 Стандартная методика приближенного анализа угля и кокса
  • D3173/D3173M – 17a Standard Test Method for Moisture in the Analysis Sample of Coal and Coke
  • D3174 – 12 Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal
  • D3175 – 17 Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke
  • D3176 – 15 Standard Practice for Ultimate Analysis of Coal and Coke
  • D3180 – 15 Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases
  • D3181 – 15e1 Standard Guide for Conducting Wear Tests on Textiles
  • D3182 – 16 Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
  • D3182-RUS – 16 СТАНДАРТНАЯ МЕТОДИКА ДЛЯ КАУЧУКОВ — МАТЕРИАЛЫ, ОБОРУДОВАНИЕ И ПРОЦЕДУРЫ СМЕШИВАНИЯ СТАНДАРТНЫХ РЕЗИНОВЫХ СМЕСЕЙ И ПРИГОТОВЛЕНИЯ СТАНДАРТНЫХ ВУЛКАНИЗИРОВАННЫХ ЛИСТОВ
  • D3183 – 10(2015) Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
  • D3184 – 11 Standard Practice for Rubber – Evaluation of NR (Natural Rubber)
  • D3185 – 06(2016) Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil
  • D3185-RUS – 06(2016) СТАНДАРТНЫЕ МЕТОДЫ ИСПЫТАНИЙ КАУЧУКА — ОЦЕНКА ХАРАКТЕРИСТИК СТИРЕН-БУТАДИЕНОВЫХ КАУЧУКОВ (SBR), ВКЛЮЧАЯ СМЕСИ С МАСЛОМ
  • D3186 – 07(2016) Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil
  • D3186-RUS – 07(2016) СТАНДАРТНЫЕ МЕТОДЫ ИСПЫТАНИЯ КАУЧУКА — ОЦЕНКА SBR (БУТАДИЕН-СТИРОЛЬНОГО КАУЧУКА), СМЕШАННОГО С ТЕХНИЧЕСКИМ УГЛЕРОДОМ ИЛИ С ТЕХНИЧЕСКИМ УГЛЕРОДОМ И МАСЛОМ
  • D3187 – 06(2016) Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Rubber)
  • D3188 – 06(2017) Standard Test Methods for Rubber—Evaluation of IIR (Isobutene-Isoprene Rubber)
  • D3189 – 06(2016) Standard Test Methods for Rubber—Evaluation of Solution BR (Polybutadiene Rubber)
  • D3189-RUS – 06(2016) СТАНДАРТНЫЕ МЕТОДЫ ИСПЫТАНИЙ КАУЧУКОВ — ОЦЕНКА ХАРАКТЕРИСТИК РАСТВОРА ПОЛИБУТАДИЕНОВОГО КАУЧУКА (BR)
  • D3190 – 06(2016) Standard Test Method for Rubber—Evaluation of Chloroprene Rubber (CR)
  • D3190-RUS – 06(2016) СТАНДАРТНЫЙ МЕТОД ОЦЕНКИ ХАРАКТЕРИСТИК ХЛОРОПРЕНОВОГО КАУЧУКА (CR)
  • D3191 – 10(2014) Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)—Recipe and Evaluation Procedures
  • D3191-RUS – 10(2014) Стандартные методы определения содержания технического углерода в бутадиен-стирольном каучуке (SBR) — Рецептура и процедуры оценки
  • D3192 – 09(2014) Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber)
  • D3193 – 17 Standard Specification for Ethylbenzene
  • D3194 – 17 Standard Test Method for Rubber From Natural Sources—Plasticity Retention Index (PRI)
  • D3195/D3195M – 10(2015) Standard Practice for Rotameter Calibration
  • D3200 – 74(2017) Standard Specification and Test Method for Establishing Recommended Design Stresses for Round Timber Construction Poles
  • D3201/D3201M – 13 Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products
  • D3203/D3203M – 17 Standard Test Method for Percent Air Voids in Compacted Asphalt Mixtures
  • D3206 – 17 Standard Test Method for Soil Resistance of Floor Polishes
  • D3207 – 17 Standard Test Method for Detergent Resistance of Floor Polish Films
  • D3209 – 93(2015) Standard Test Method for Freeze/Thaw Resistance of Polymer Floor Polishes
  • D3210 – 95(2016) Standard Test Method for Comparing Colors of Films from Water-Emulsion Floor Polishes
  • D3212 – 07(2013) Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
  • D3213 – 13 Standard Practices for Handling, Storing, and Preparing Soft Intact Marine Soil
  • D3217/D3217M – 15 Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations
  • D3218 – 07(2012) Standard Specification for Polyolefin Monofilaments
  • D3222 – 05(2015) Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
  • D3223 – 17 Standard Test Method for Total Mercury in Water
  • D3227 – 16 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
  • D3227-RUS – 16 Стандартный метод определения меркаптановой серы в бензине, керосине, топливе для турбореактивных двигателей и дистиллятом топливе (потенциометрический метод)
  • D3227-SP – 16 Método de prueba estándar para la determinación de azufre (tiol mercaptano) en gasolina, keroseno, combustibles para turbinas de aviones y combustibles destilados (método potenciométrico)
  • D3228 – 08(2014) Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
  • D3228-RUS – 08(2014) Стандартный метод определения общего содержания азота в смазочных маслах и топливных маслах модифицированным методом Кьельдаля
  • D3230 – 13 Standard Test Method for Salts in Crude Oil (Electrometric Method)
  • D3230-RUS – 13 Стандартный метод определения солей в сырой нефти (электрометрический метод)
  • D3231 – 13 Standard Test Method for Phosphorus in Gasoline
  • D3233 – 93(2014) Standard Test Methods for Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee Block Methods)
  • D3233-RUS – 93(2014) Стандартные методы измерения противозадирных свойств жидких смазок (Методы штифта и V-образного блока Фалекса)
  • D3235 – 16e1 Standard Test Method for Solvent Extractables in Petroleum Waxes
  • D3236 – 15 Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials
  • D3237 – 17 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
  • D3237-RUS – 17 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ СВИНЦА В БЕНЗИНЕ С ПОМОЩЬЮ АТОМНОЙ АБСОРБЦИОННОЙ СПЕКТРОСКОПИИ
  • D3238 – 17a Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method
  • D3239 – 91(2016) Standard Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry
  • D3240 – 15 Standard Test Method for Undissolved Water In Aviation Turbine Fuels
  • D3241 – 17a Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
  • D3242 – 11(2017) Standard Test Method for Acidity in Aviation Turbine Fuel
  • D3242-RUS – 11(2017) СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ КИСЛОТНОСТИ ТОПЛИВА ДЛЯ АВИАЦИОННЫХ ТУРБОРЕАКТИВНЫХ ДВИГАТЕЛЕЙ
  • D3244 – 16 Standard Practice for Utilization of Test Data to Determine Conformance with Specifications
  • D3246 – 15 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
  • D3246-RUS – 15 Стандартный метод определения содержания серы в нефтяном газе методом окислительной микрокулонометрии
  • D3249 – 95(2011) Standard Practice for General Ambient Air Analyzer Procedures
  • D3251 – 04(2013) Standard Test Method for Thermal Endurance Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire
  • D3256 – 86(2014) Standard Test Methods for Chemical Analysis of Phthalocyanine Blue and Green Pigments
  • D3257 – 06(2012) Standard Test Methods for Aromatics in Mineral Spirits by Gas Chromatography
  • D3258 – 04(2014) Standard Test Method for Porosity of White or Near White Paint Films by Staining
  • D3260 – 01(2017) Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products
  • D3261 – 16 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
  • D3262 – 16 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
  • D3265 – 17a Standard Test Method for Carbon Black—Tint Strength
  • D3266 – 91(2011) Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
  • D3267 – 12 Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)
  • D3268 – 91(2011) Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method)
  • D3270 – 13 Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method)
  • D3271 – 87(2012) Standard Practice for Direct Injection of Solvent-Reducible Paints Into a Gas Chromatograph for Solvent Analysis
  • D3273 – 16 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
  • D3274 – 09(2017) Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation
  • D3275 – 08(2013) Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials
  • D3276 – 15e1 Standard Guide for Painting Inspectors (Metal Substrates)
  • D3278 – 96(2011) Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
  • D3278-RUS – 96(2011) Стандартные методы определения температуры вспышки жидкостей с помощью малогабаритного прибора с закрытым тиглем
  • D3279 – 12e1 Standard Test Method for n-Heptane Insolubles
  • D3279-RUS – 12e1 Стандартный метод определения нерастворимых в н-гептане веществ
  • D3280 – 85(2014) Standard Test Methods for Analysis of White Zinc Pigments
  • D3282 – 15 Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
  • D3283 – 98(2012) Standard Specification for Air as an Electrical Insulating Material
  • D3284 – 05(2011) Standard Practice for Combustible Gases in the Gas Space of Electrical Apparatus Using Portable Meters
  • D3288/D3288M – 15 Standard Test Methods for Magnet-Wire Enamels
  • D3289 – 17 Standard Test Method for Density of Semi-Solid and Solid Asphalt Materials (Nickel Crucible Method)
  • D3291 – 11(2016)e1 Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression
  • D3294 – 15 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes
  • D3295 – 15 Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing
  • D3296 – 14a Standard Specification for FEP-Fluorocarbon Tube
  • D3299 – 10 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
  • D3299-RUS – 10 Стандартная спецификация на коррозионно-стойкие резервуары с обмоткой нитью из армированной стекловолокномтермореактивной смолы
  • D3300 – 12 Standard Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Under Impulse Conditions
  • D3302/D3302M – 17 Standard Test Method for Total Moisture in Coal
  • D3306 – 14 Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
  • D3307 – 16 Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials
  • D3308 – 12(2017) Standard Specification for PTFE Resin Skived Tape
  • D3310 – 00(2014) Standard Test Method for Determining Corrosivity of Adhesive Materials
  • D3311 – 17 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
  • D3312 – 04(2013) Standard Test Method for Percent Reactive Monomer in Solventless Varnishes
  • D3314 – 02(2017) Standard Test Method for Rubber—Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices
  • D3316 – 06(2016) Standard Test Method for Stability of Perchloroethylene with Copper
  • D3319 – 11(2017) Standard Practice for the Accelerated Polishing of Aggregates Using the British Wheel
  • D3321 – 13 Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants
  • D3322 – 82(2017) Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal
  • D3325 – 90(2013) Standard Practice for Preservation of Waterborne Oil Samples
  • D3326 – 07(2017) Standard Practice for Preparation of Samples for Identification of Waterborne Oils
  • D3328 – 06(2013) Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography
  • D3329 – 03(2017) Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography
  • D3330/D3330M – 04(2010) Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape
  • D3332 – 99(2016) Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
  • D3333 – 07(2012) Standard Practice for Sampling Manufactured Staple Fibers, Sliver, or Tow for Testing
  • D3335 – 85a(2014) Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
  • D3336 – 17 Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures
  • D3338/D3338M – 09(2014)e2 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
  • D3338/D3338M-RUS – 09(2014)e2 Стандартный метод испытаний для оценки полезной теплоты сгорания авиационных топлив
  • D3339 – 12(2017) Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
  • D3341 – 16 Standard Test Method for Lead in Gasoline—Iodine Monochloride Method
  • D3341-RUS – 16 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ СОДЕРЖАНИЯ СВИНЦА В БЕНЗИНЕ — МЕТОД МОНОХЛОРИДА ЙОДА
  • D3342 – 90(2017) Standard Test Method for Dispersion Stability of New (Unused) Rolling Oil Dispersions in Water
  • D3343 – 16 Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels
  • D3344 – 90(2015) Standard Test Method for Total  Wax  Content  of  Corrugated  Paperboard
  • D3345 – 17 Standard Test Method for Laboratory Evaluation of Solid Wood for Resistance to Termites
  • D3346 – 17 Standard Test Methods for Rubber Property—Processability of Emulsion SBR (Styrene-Butadiene Rubber) With the Mooney Viscometer (Delta Mooney)
  • D3348 – 12(2017) Standard Test Method for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method)
  • D3349 – 17 Standard Test Method for Absorption Coefficient of Ethylene Polymer Material Pigmented with Carbon Black
  • D3350 – 14 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
  • D3352 – 15 Standard Test Method for Strontium Ion in Brackish Water, Seawater, and Brines
  • D3353 – 10 Standard Test Methods for Fibrous-Insulated Magnet Wire
  • D3354 – 15 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
  • D3359 – 17 Standard Test Methods for Rating Adhesion by Tape Test
  • D3361/D3361M – 13 Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
  • D3363 – 05(2011)e2 Standard Test Method for Film Hardness by Pencil Test
  • D3363-RUS – 05(2011)e2 Стандартный метод определения твердости пленки с использованием карандаша
  • D3364 – 99(2011) Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
  • D3367 – 13 Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force
  • D3368 – 17 Standard Specification for FEP Sheet and Film
  • D3370 – 10 Standard Practices for Sampling Water from Closed Conduits
  • D3370-RUS – 10 СТАНДАРТНЫЕ МЕТОДИКИ ОТБОРА ПРОБ ВОДЫ ИЗ ЗАКРЫТЫХ ВОДОВОДОВ
  • D3372 – 17 Standard Test Method for Molybdenum in Water
  • D3373 – 17 Standard Test Method for Vanadium in Water
  • D3374/D3374M – 14 Standard Specification for Vinyl-Coated Glass Yarns
  • D3375 – 16 Standard Test Method for Column Capacity of Particulate Mixed Bed IonExchange Materials
  • D3376 – 14 Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation
  • D3377 – 04(2013) Standard Test Method for Weight Loss of Solventless Varnishes
  • D3380 – 14 Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates
  • D3381/D3381M – 13 Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction
  • D3382 – 13 Standard Test Methods for Measurement of Energy and Integrated Charge Transfer Due to Partial Discharges (Corona) Using Bridge Techniques
  • D3385 – 09 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
  • D3387 – 11 Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM)
  • D3389 – 16 Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)
  • D3393 – 91(2014) Standard Specification for Coated Fabrics—Waterproofness
  • D3394 – 16 Standard Test Methods for Sampling and Testing Electrical Insulating Board
  • D3401 – 97(2017) Standard Test Methods for Water in Halogenated Organic Solvents and Their Admixtures
  • D3402/D3402M – 16 Standard Test Method for Tumbler Test for Coke
  • D3403 – 07(2016) Standard Test Methods for Rubber—Evaluation of IR (Isoprene Rubber)
  • D3403-RUS – 07(2016) СТАНДАРТНЫЕ МЕТОДЫ ИСПЫТАНИЙ КАУЧУКА — ОЦЕНКА ХАРАКТЕРИСТИК ИЗОПРЕНОВЫХ КАУЧУКОВ (IR)
  • D3404 – 15 Standard Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers
  • D3409/D3409M – 93(2016)e1 Standard Test Method for Adhesion of Asphalt-Roof Cement to Damp, Wet, or Underwater Surfaces
  • D3410/D3410M – 16 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
  • D3412/D3412M – 13 Standard Test Method for Coefficient of Friction, Yarn to Yarn
  • D3414 – 98(2011)e1 Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
  • D3415 – 98(2017) Standard Practice for Identification of Waterborne Oils
  • D3418 – 15 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
  • D3419 – 12 Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds
  • D3420 – 14 Standard Test Method for Pendulum Impact Resistance of Plastic Film
  • D3423/D3423M – 15 Standard Practice for Application of Emulsified Coal-Tar Pitch (Mineral Colloid Type)
  • D3424 – 11 Standard Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter
  • D3426 – 97(2012) Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves
  • D3427 – 15 Standard Test Method for Air Release Properties of Hydrocarbon Based Oils
  • D3430 – 95(2016) Standard Test Method for Clarity and Yellowness of Liquid Water-Based Clear Floor Polishes
  • D3433 – 99(2012) Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
  • D3434 – 00(2013) Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
  • D3437 – 15 Standard Practice for Sampling and Handling Liquid Cyclic Products
  • D3438 – 15 Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride
  • D3440 – 13 Standard Guide for Preparing Specifications for Water-Emulsion Floor Polishes
  • D3441 – 16 Standard Test Method for Mechanical Cone Penetration Testing of Soils
  • D3443 – 00(2015) Standard Test Method for Chloride in Trichlorotrifluoroethane
  • D3444 – 00(2015) Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
  • D3448 – 10(2015)e1 Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane
  • D3450 – 15 Standard Test Method for Washability Properties of Interior Architectural Coatings
  • D3451 – 06(2017) Standard Guide for Testing Coating Powders and Powder Coatings
  • D3452 – 06(2017) Standard Practice for Rubber—Identification by Pyrolysis-Gas Chromatography
  • D3453 – 12 Standard Specification for Flexible Cellular Materials—Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications
  • D3454 – 11 Standard Test Method for Radium-226 in Water
  • D3455 – 11 Standard Test Methods for Compatibility of Construction Material with Electrical Insulating Oil of Petroleum Origin
  • D3456 – 86(2012) Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack
  • D3461 – 14 Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method)
  • D3462/D3462M – 16 Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
  • D3464 – 96(2014) Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
  • D3465 – 14 Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography
  • D3466 – 06(2011) Standard Test Method for Ignition Temperature of Granular Activated Carbon
  • D3467 – 04(2014) Standard Test Method for Carbon Tetrachloride Activity of Activated Carbon
  • D3468/D3468M – 99(2013)e1 Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing
  • D3474 – 90(2012) Standard Practice for Calibration and Use of Torque Meters Used in Packaging Applications
  • D3475 – 17 Standard Classification of Child-Resistant Packages
  • D3479/D3479M – 12 Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
  • D3481 – 06(2011) Standard Test Method for Manual Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions
  • D3482 – 07a(2014) Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives
  • D3483 – 14 Standard Test Methods for Accumulated Deposition in a Steam Generator Tube
  • D3484 – 06(2016) Standard Test Methods for Rubber—Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber)
  • D3485 – 15 Standard Specification for Coilable High Density Polyethylene (HDPE) Cable in Conduit (CIC)
  • D3487 – 16e1 Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus
  • D3489 – 17 Standard Test Methods for Microcellular Urethane Materials
  • D3492 – 16 Standard Specification for Rubber Contraceptives (Male Condoms)
  • D3493 – 16 Standard Test Method for Carbon Black—Oil Absorption Number of Compressed Sample (COAN)
  • D3493-RUS – 16 Стандартный метод испытаний технического углерода —Определение числа абсорбции масла сжатой пробы (COAN)
  • D3495 – 10(2015) Standard Test Method for Hexane Extraction of Leather
  • D3498 – 03(2011) Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems
  • D3499 – 11 Standard Test Method for Toughness of Wood-Based Structural Panels
  • D3500 – 14 Standard Test Methods for Structural Panels in Tension
  • D3501 – 05a(2011) Standard Test Methods for Wood-Based Structural Panels in Compression
  • D3505 – 12e1 Standard Test Method for Density or Relative Density of Pure Liquid Chemicals
  • D3505-RUS – 12e1 Стандартный метод определения плотности или относительной плотности чистых жидких химикатов1
  • D3505-RUS – 12 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ ПЛОТНОСТИ ИЛИ ОТНОСИТЕЛЬНОЙ ПЛОТНОСТИ ЧИСТЫХ ЖИДКИХ ХИМИКАТОВ
  • D3511/D3511M – 16 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
  • D3512/D3512M – 16 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester
  • D3513 – 02(2012) Standard Test Method for Overlength Fiber Content of Manufactured Staple Fiber
  • D3514/D3514M – 16 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Elastomeric Pad
  • D3516 – 89(2011) Standard Test Methods for Ashing Cellulose
  • D3517 – 14 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
  • D3518/D3518M – 13 Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate
  • D3518/D3518M-RUS – 13 Стандартный метод определения сдвиговых характеристик в плоскости сечения композитных материалов с полимерной матрицей путем испытания на растяжение слоистого материала с диагональными (±45°) армирующими волокнами
  • D3521 – 86(2017) Standard Test Method for Surface Wax Coating On Corrugated Board
  • D3524 – 14 Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography
  • D3525 – 04(2016) Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography
  • D3527 – 15 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease
  • D3528 – 96(2016) Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
  • D3529 – 16 Standard Test Methods for Constituent Content of Composite Prepreg
  • D3530 – 97(2015) Standard Test Method for Volatiles Content of Composite Material Prepreg
  • D3531/D3531M – 16 Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
  • D3532/D3532M – 12 Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
  • D3535 – 07a(2013) Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions
  • D3540 – 12 Standard Specification for Primary Amyl Acetate, Synthetic (98 % Grade)
  • D3542 – 08(2013) Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges
  • D3543 – 17 Standard Test Method for Metal Glide Adhesion
  • D3545 – 06(2012) Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography
  • D3546 – 05(2011) Standard Test Method for Formic Acid in Glacial Acetic Acid
  • D3548 – 09(2017) Standard Specification for Ethyl Acrylate
  • D3549/D3549M – 17 Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens
  • D3550/D3550M – 17 Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils
  • D3551 – 17 Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer
  • D3552 – 17 Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
  • D3554 – 07(2013) Standard Specification for Track-Resistant Black Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75 °C Operation
  • D3555 – 07(2013) Standard Specification for Track-Resistant Black Crosslinked Polyethylene Insulation for Wire and Cable, 90 °C Operation
  • D3556 – 14 Standard Guide for Deposition on Glassware During Mechanical Dishwashing
  • D3557 – 17 Standard Test Methods for Cadmium in Water
  • D3558 – 15 Standard Test Methods for Cobalt in Water
  • D3559 – 15 Standard Test Methods for Lead in Water
  • D3561 – 16 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
  • D3562 – 14 Standard Performance Specification for Woven Drycleanable Coat Fabrics
  • D3564 – 95(2015) Standard Practice for Application of Floor Polishes to Maintain Vinyl Composition Tile or Flooring
  • D3566 – 03(2014) Standard Practice for Rubber—Determination of Bromine in the Presence of Chlorine by Oxygen Combustion
  • D3567 – 17 Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
  • D3568 – 03(2013) Standard Test Methods for Rubber—Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil
  • D3574 – 17 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
  • D3575 – 14 Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers
  • D3576 – 15 Standard Test Method for Cell Size of Rigid Cellular Plastics
  • D3577 – 09(2015) Standard Specification for Rubber Surgical Gloves
  • D3578 – 05(2015) Standard Specification for Rubber Examination Gloves
  • D3579 – 77(2016) Standard Specification for Rubber Surgical Drainage Tubes, Penrose-Type
  • D3580 – 95(2015) Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products
  • D3585 – 08(2013) Standard Specification for ASTM Reference Fluid for Coolant Tests
  • D3588 – 98(2017) Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels
  • D3590 – 17 Standard Test Methods for Total Kjeldahl Nitrogen in Water
  • D3591 – 17 Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds
  • D3594 – 93(2013) Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers
  • D3595 – 14 Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film
  • D3596 – 14 Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins
  • D3597 – 02(2013) Standard Performance Specification for Woven Upholstery Fabrics—Plain, Tufted, or Flocked
  • D3598 – 89(2016) Standard Test Method for Citrate in Synthetic Detergents
  • D3603 – 14 Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method)
  • D3605 – 17 Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy
  • D3605-RUS – 17 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ СЛЕДОВЫХ МЕТАЛЛОВ В ТОПЛИВАХ ДЛЯ ГАЗОТУРБИННОГО ДВИГАТЕЛЯ С ПОМОЩЬЮ АТОМНО-АБСОРБЦИОННОЙ И ПЛАМЕННО-ЭМИССИОННОЙ СПЕКТРОСКОПИИ
  • D3606 – 10e1 Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography
  • D3606-RUS – 10e1 Стандартный метод определения содержания бензола и толуола в готовом к применению автомобильном и авиационном бензине с помощью газовой хроматографии
  • D3606-SP – 10e1 Método de prueba estándar para la determinación de benceno y tolueno en gasolina terminada para motores y aviones mediante cromatografía de gases
  • D3607 – 08(2016) Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping
  • D3608 – 95(2011) Standard Test Method for Nitrogen Oxides (Combined) Content in the Atmosphere by the Griess-Saltzman Reaction
  • D3609 – 00(2014) Standard Practice for Calibration Techniques Using Permeation Tubes
  • D3610 – 00(2015) Standard Test Method for Total Cobalt in Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method
  • D3611 – 06(2011) Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes
  • D3612 – 02(2017) Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
  • D3614 – 07(2013) Standard Guide for Laboratories Engaged in Sampling and Analysis of Atmospheres and Emissions
  • D3616 – 95(2014) Standard Test Method for Rubber—Determination of Gel, Swelling Index, and Dilute Solution Viscosity
  • D3617/D3617M – 17 Standard Practice for Sampling and Analysis of Built-Up Roof Systems During Application
  • D3618 – 05(2015) Standard Test Method for Detection of Lead in Paint and Dried Paint Films
  • D3620 – 04(2017) Standard Specification for Glacial Acetic Acid
  • D3622 – 11 Standard Specification for 1-Propanol (n-Propyl Alcohol)
  • D3623 – 78a(2012) Standard Test Method for Testing Antifouling Panels in Shallow Submergence
  • D3624 – 85a(2015) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
  • D3625/D3625M – 12 Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water
  • D3628 – 15 Standard Practice for Selection and Use of Emulsified Asphalts
  • D3631 – 99(2017) Standard Test Methods for Measuring Surface Atmospheric Pressure
  • D3632 – 98(2011) Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method
  • D3633/D3633M – 12 Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems
  • D3634 – 99(2015) Standard Test Method for Trace Chloride Ion in Engine Coolants
  • D3634-RUS – 99(2015) Стандартный метод определения следов хлорид-ионов в охлаждающих жидкостях для двигателей
  • D3635 – 13 Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
  • D3636 – 13ae1 Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
  • D3638 – 12 Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials
  • D3639/D3639M – 92(2011)e1 Standard Test Method for Classification of Asbestos by Quebec Standard Test
  • D3641 – 15 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
  • D3642 – 13 Standard Test Method for Softening Point of Certain Alkali-Soluble Resins
  • D3643 – 15 Standard Test Method for Acid Number of Certain Alkali-Soluble Resins
  • D3644 – 15 Standard Test Method for Acid Number of Styrene-Maleic Anhydride Resins
  • D3645 – 15 Standard Test Methods for Beryllium in Water
  • D3647 – 16 Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to Composition
  • D3648 – 14 Standard Practices for the Measurement of Radioactivity
  • D3649 – 06(2014) Standard Practice for High-Resolution Gamma-Ray Spectrometry of Water
  • D3650 – 93(2011) Standard Test Method for Comparison of Waterborne Petroleum Oils By Fluorescence Analysis
  • D3651 – 16 Standard Test Method for Barium in Brackish Water, Seawater, and Brines
  • D3652/D3652M – 01(2012) Standard Test Method for Thickness of Pressure-Sensitive Tapes
  • D3654/D3654M – 06(2011) Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes
  • D3655 – 14 Standard Performance Specification for Men’s and Women’s Sliver Knitted Overcoat and Jacket Fabrics
  • D3656/D3656M – 13 Standard Specification for Insect Screening and Louver Cloth Woven fromVinyl-Coated Glass Yarns
  • D3657 – 03(2014) Standard Specification for Zipper Dimensions
  • D3658 – 01(2016) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
  • D3663 – 03(2015) Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
  • D3664 – 16 Standard Specification for Biaxially Oriented Polymeric Resin Film for Capacitors in Electrical Equipment
  • D3665 – 12(2017) Standard Practice for Random Sampling of Construction Materials
  • D3666 – 16 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
  • D3667 – 16 Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors
  • D3670 – 91(2014) Standard Guide for Determination of Precision and Bias of Methods of Committee D22
  • D3673 – 89(2016) Standard Test Methods for Chemical Analysis of Alpha Olefin Sulfonates
  • D3675 – 17 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
  • D3676 – 13 Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay
  • D3677 – 10(2015) Standard Test Methods for Rubber—Identification by Infrared Spectrophotometry
  • D3678 – 14 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions
  • D3679 – 17 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
  • D3681 – 12e1 Standard Test Method for Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition
  • D3682 – 13 Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes
  • D3682-RUS – 13 Стандартный метод определения основных элементов и микроэлементов в продуктах сгорания в процессах использования угля
  • D3683 – 11 Standard Test Method for Trace Elements in Coal and Coke Ash by Atomic Absorption
  • D3685/D3685M – 13 Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
  • D3686 – 13 Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)
  • D3687 – 07(2012) Standard Practice for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method
  • D3689/D3689M – 07(2013)e1 Standard Test Methods for Deep Foundations Under Static Axial Tensile Load
  • D3692 – 89(2016) Standard Practice for Selection of Zippers for Care-Labeled Apparel and Household Furnishings
  • D3693 – 02(2016) Standard Specification for Labeled Length per Holder of Sewing Thread
  • D3694 – 96(2017) Standard Practices for Preparation of Sample Containers and for Preservation of Organic Constituents
  • D3695 – 95(2013) Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography
  • D3697 – 17 Standard Test Method for Antimony in Water
  • D3698 – 04(2015) Standard Practice for Solvent Vapor Degreasing Operations
  • D3699 – 13be1 Standard Specification for Kerosine
  • D3700 – 16 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
  • D3701 – 17 Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry
  • D3701-RUS – 17 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ СОДЕРЖАНИЯ ВОДОРОДА В АВИАЦИОННЫХ ТУРБИННЫХ ТОПЛИВАХ С ПОМОЩЬЮ ЯДЕРНОЙ МАГНИТНО-РЕЗОНАНСНОЙ СПЕКТРОМЕТРИИ НИЗКОГО РАЗРЕШЕНИЯ
  • D3702 – 94(2014) Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine
  • D3703 – 13 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels, Gasoline and Diesel Fuels
  • D3703-RUS – 13 Стандартный метод определения гидропероксидного числа авиационного турбинного топлива, бензинового и дизельного топлива
  • D3704 – 96(2017) Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion
  • D3705 – 14 Standard Test Method for Misting Properties of Lubricating Fluids
  • D3712 – 05(2017) Standard Test Method of Analysis of Oil-Soluble Petroleum Sulfonates by Liquid Chromatography
  • D3715/D3715M – 98(2011) Standard Practice for Quality Assurance of Pressure-Sensitive Tapes
  • D3716 – 14 Standard Test Methods for Use of Emulsion Polymers in Floor Polishes
  • D3717 – 85a(2015) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
  • D3718 – 85a(2015) Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
  • D3720 – 90(2011) Standard Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-Ray Diffraction
  • D3721 – 05(2011) Standard Specification for Synthetic Red Iron Oxide Pigment
  • D3722 – 05(2011) Standard Specification for Natural Red and Brown Iron Oxide Pigments
  • D3723 – 05(2017) Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing
  • D3724 – 01(2012) Standard Specification for Synthetic Brown Iron Oxide Pigment
  • D3728 – 08(2012) Standard Specification for 2-Ethoxyethyl Acetate (99 % Grade)
  • D3730 – 17 Standard Guide for Testing High-Performance Interior Architectural Wall Coatings
  • D3731 – 87(2012) Standard Practices for Measurement of Chlorophyll Content of Algae in Surface Waters
  • D3732 – 82(2017) Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
  • D3734 – 05(2010) Standard Specification for High-Flash Aromatic Naphthas
  • D3735 – 07(2012) Standard Specification for VM&P Naphthas
  • D3737 – 12 Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)
  • D3738 – 16 Standard Specification for Rubber-Coated Cloth Hospital Sheeting
  • D3739 – 06(2010) Standard Practice for Calculation and Adjustment of the Langelier Saturation Index for Reverse Osmosis
  • D3740 – 12a Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
  • D3741 – 00(2015)e1 Standard Test Methods for Appearance of Admixtures Containing Halogenated Organic Solvents
  • D3744/D3744M – 11a Standard Test Method for Aggregate Durability Index
  • D3746/D3746M – 85(2015)e1 Standard Test Method for Impact Resistance of Bituminous Roofing Systems
  • D3748 – 14 Standard Practice for Evaluating High-Density Rigid Cellular Plastics
  • D3749 – 13 Standard Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique
  • D3751/D3751M – 10(2017) Standard Practice for Evaluation of Furniture Polish
  • D3752 – 98(2011) Standard Test Method for Strength Imparted by Asbestos to a Cementitious Matrix
  • D3753 – 12e1 Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells
  • D3754 – 14 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
  • D3755 – 14 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress
  • D3756 – 97(2010) Standard Test Method for Evaluation of Resistance to Electrical Breakdown by Treeing in Solid Dielectric Materials Using Diverging Fields
  • D3757 – 16 Standard Guide for Preparing Specifications for Solvent-based Floor Polishes
  • D3758 – 95(2017) Standard Practice for Evaluation of Spray-Buff Products on Test Floors
  • D3759/D3759M – 05(2011) Standard Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape
  • D3759/D3759M-RUS – 05(2011) Стандартный метод определения прочности на разрыв и относительного удлинения при растяжении самоклеющейся ленты
  • D3760 – 18 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography
  • D3761 – 10 Standard Test Method for Total Fluorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
  • D3761-RUS – 10 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ ОБЩЕГО СОДЕРЖАНИЯ ФТОРА В УГЛЕ С ПОМОЩЬЮ СЖИГАНИЯ В КИСЛОРОДНОЙ БОМБЕ И ИОН-СЕЛЕКТИВНОГО ЭЛЕКТРОДА
  • D3762 – 03(2010) Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test)
  • D3763 – 15 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
  • D3764 – 15e1 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
  • D3766 – 08(2013) Standard Terminology Relating to Catalysts and Catalysis
  • D3767 – 03(2014) Standard Practice for Rubber—Measurement of Dimensions
  • D3768 – 16 Standard Test Method for Microcellular Urethanes—Flexural Recovery
  • D3769 – 15 Standard Test Method for Microcellular Urethanes—High-Temperature Sag
  • D3771 – 15 Standard Specification for Rubber Seals Used in Concentrating Solar Collectors
  • D3772 – 15 Standard Specification for Industrial Rubber Finger Cots
  • D3773/D3773M – 10(2014) Standard Test Methods for Length of Woven Fabric
  • D3774 – 96(2016) Standard Test Method for Width of Textile Fabric
  • D3774-RUS – 96(2016) СТАНДАРТНЫЙ МЕТОД ИЗМЕРЕНИЯ ШИРИНЫ ТЕКСТИЛЬНОЙ ТКАНИ
  • D3775 – 17 Standard Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics
  • D3776/D3776M – 09a(2017) Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
  • D3780 – 14 Standard Performance Specification for Men’s and Boys’ Woven Dress Suit Fabrics and Woven Sportswear Jacket, Slack, and Trouser Fabrics
  • D3782 – 14 Standard Performance Specification for Men’s and Boys’ Knitted Dress Suit Fabrics and Knitted Sportswear Jacket, Slack, and Trouser Fabrics
  • D3785 – 14 Standard Performance Specification for Woven Necktie and Scarf Fabrics
  • D3786/D3786M – 18 Standard Test Method for Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method
  • D3787 – 16 Standard Test Method for Bursting Strength of Textiles—Constant-Rate-of-Traverse (CRT) Ball Burst Test
  • D3790 – 17 Standard Test Method for Volatile Matter (Moisture) of Leather by Oven Drying
  • D3791/D3791M – 11 Standard Practice for Evaluating the Effects of Heat on Asphalts
  • D3792 – 16 Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
  • D3794 – 17 Standard Guide for Testing Coil Coatings
  • D3795 – 00a(2012) Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
  • D3796 – 09(2016) Standard Practice for Calibration of Type S Pitot Tubes
  • D3800 – 16 Standard Test Method for Density of High-Modulus Fibers
  • D3801 – 10 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
  • D3802 – 16 Standard Test Method for Ball-Pan Hardness of Activated Carbon
  • D3803 – 91(2014) Standard Test Method for Nuclear-Grade Activated Carbon
  • D3804 – 02(2014) Standard Test Method for Iron in Paint Driers by EDTA Method
  • D3805/D3805M – 16 Standard Guide for Application of Aluminum-Pigmented Asphalt Roof Coatings
  • D3806 – 98(2016) Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method)
  • D3807 – 98(2012) Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics)
  • D3808 – 01(2013) Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion
  • D3811/D3811M – 96(2011) Standard Test Method for Unwind Force of Pressure-Sensitive Tapes
  • D3813/D3813M – 98(2012)e1 Standard Test Method for Curling, Twisting, and Tubing on Unwind of Pressure-Sensitive Tapes
  • D3815/D3815M – 05(2011) Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Open-Flame Carbon-Arc Exposure Apparatus
  • D3816/D3816M – 96(2012) Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
  • D3822/D3822M – 14 Standard Test Method for Tensile Properties of Single Textile Fibers
  • D3823 – 07(2012) Standard Practice for Determining Ticket Numbers for Sewing Threads
  • D3824 – 12 Standard Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by the Chemiluminescent Method
  • D3826 – 98(2013) Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test
  • D3827 – 92(2012) Standard Test Method for Estimation of Solubility of Gases in Petroleum and Other Organic Liquids
  • D3828 – 16a Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
  • D3829 – 17 Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
  • D3831 – 12(2017) Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
  • D3831-RUS – 12(2017) СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ СОДЕРЖАНИЯ МАРГАНЦА В БЕНЗИНЕ МЕТОДОМ АТОМНО- АБСОРБЦИОННОЙ СПЕКТРОСКОПИИ
  • D3832 – 79(2017) Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems
  • D3833/D3833M – 96(2011) Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes
  • D3835 – 16 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
  • D3836 – 13 Standard Practice for Evaluation of Automotive Polish
  • D3837 – 95(2012) Standard Practice for Preparing a Solution of Alkali–Soluble Resins
  • D3838 – 05(2017) Standard Test Method for pH of Activated Carbon
  • D3839 – 14 Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe
  • D3840 – 14 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
  • D3841 – 16 Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels
  • D3843 – 16 Standard Practice for Quality Assurance for Protective Coatings Applied to Nuclear Facilities
  • D3846 – 08(2015) Standard Test Method for In-Plane Shear Strength of Reinforced Plastics
  • D3847 – 01(2012) Standard Practice for Rubber—Directions for Achieving Subnormal Test Temperatures
  • D3848 – 03(2013) Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Copolymers) Mixed With Carbon Black
  • D3849 – 14a Standard Test Method for Carbon Black—Morphological Characterization of Carbon Black Using Electron Microscopy
  • D3850 – 12 Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
  • D3851 – 17 Standard Specification for Microcellular Polyurethane Shoe Soling Materials
  • D3852 – 16 Standard Practice for Sampling and Handling Phenol, Cresols, and Cresylic Acid
  • D3853 – 12(2017) Standard Terminology Relating to Rubber and Rubber Latices—Abbreviations for Chemicals Used in Compounding
  • D3856 – 11(2015) Standard Guide for Management Systems in Laboratories Engaged in Analysis of Water
  • D3858 – 95(2014) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
  • D3859 – 15 Standard Test Methods for Selenium in Water
  • D3860 – 98(2014) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique
  • D3861 – 91(2011) Standard Test Method for Quantity of Water-Extractable Matter in Membrane Filters
  • D3862 – 13 Standard Test Method for Retention Characteristics of 0.2-µm Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality
  • D3863 – 87(2011) Standard Test Method for Retention Characteristics of 0.40 to 0.45-μm Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality
  • D3864 – 12 Standard Guide for On-Line Monitoring Systems for Water Analysis
  • D3865 – 09(2015) Standard Test Method for Plutonium in Water
  • D3866 – 12 Standard Test Methods for Silver in Water
  • D3867 – 16 Standard Test Methods for Nitrite-Nitrate in Water
  • D3868 – 15 Standard Test Method for Fluoride Ions in Brackish Water, Seawater, and Brines
  • D3869 – 15 Standard Test Methods for Iodide and Bromide Ions in Brackish Water, Seawater, and Brines
  • D3871 – 84(2017) Standard Test Method for Purgeable Organic Compounds in Water Using Headspace Sampling
  • D3872 – 05(2011) Standard Test Method for Ferrous Iron in Iron Oxides
  • D3874 – 13 Standard Test Method for Ignition of Materials by Hot Wire Sources
  • D3875 – 15 Standard Test Method for Alkalinity in Brackish Water, Seawater, and Brines
  • D3876 – 96(2013) Standard Test Method for Methoxyl and Hydroxypropyl Substitution in Cellulose Ether Products by Gas Chromatography
  • D3878 – 16 Standard Terminology for Composite Materials
  • D3880/D3880M – 90(2017) Standard Test Method for Asbestos Strength Units
  • D3882 – 08(2016)e1 Standard Test Method for Bow and Skew in Woven and Knitted Fabrics
  • D3883 – 04(2016) Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
  • D3884 – 09(2017) Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method)
  • D3885 – 07a(2015) Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
  • D3886 – 99(2015) Standard Test Method for Abrasion Resistance of Textile Fabrics (Inflated Diaphragm Apparatus)
  • D3888 – 15 Standard Terminology for Yarn Spinning Systems
  • D3889/D3889M – 96(2012) Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature
  • D3890 – 05(2010) Standard Test Method for Number of Strokes to Prime a Mechanical Pump Dispenser
  • D3891 – 08(2014) Standard Practice for Preparation of Glass Panels for Testing Paint, Varnish, Lacquer, and Related Products
  • D3892 – 15 Standard Practice for Packaging/Packing of Plastics
  • D3893 – 03(2017) Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography
  • D3895 – 14 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
  • D3896 – 07(2016) Standard Practice for Rubber From Synthetic Sources—Sampling
  • D3896-RUS – 07(2016) СТАНДАРТНАЯ МЕТОДИКА ДЛЯ СИНТЕТИЧЕСКИХ КАУЧУКОВ — ОТБОР ПРОБ
  • D3897 – 17 Standard Practice for Calculation of Basicity of Chrome Tanning Liquors
  • D3898 – 93(2015) Standard Test Method for Chromic Oxide in Basic Chromium Tanning Liquors
  • D3900 – 17 Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
  • D3902 – 90(2012) Standard Test Method for Rubber Hose for Gas Diffusion of Liquefied Petroleum Gas
  • D3903 – 15 Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems
  • D3906 – 03(2013) Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
  • D3907/D3907M – 13 Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
  • D3907/D3907M-RUS – 13 Стандартный метод испытаний флюидизированных крекирующих катализаторов (ФКК) с помощью теста на микроактивность
  • D3908 – 03(2015) Standard Test Method for Hydrogen Chemisorption on Supported Platinum Catalysts by Volumetric Vacuum Method
  • D3909/D3909M – 14 Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules
  • D3910 – 15 Standard Practices for Design, Testing, and Construction of Slurry Seal
  • D3911 – 16 Standard Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions
  • D3912 – 10(2017) Standard Test Method for Chemical Resistance of Coatings and Linings for Use in Nuclear Power Plants
  • D3913 – 03(2015) Standard Test Method for Acidity in Basic Chromium Tanning Liquors
  • D3914 – 02(2016) Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod
  • D3916 – 08(2016) Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod
  • D3916-RUS – 08(2016) СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ МЕХАНИЧЕСКИХ СВОЙСТВ ПРИ РАСТЯЖЕНИИ ОДНООСНО ОРИЕНТИРОВАННОГО СТЕКЛОПЛАСТИКОВОГО СТЕРЖНЯ
  • D3917 – 15a Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
  • D3918 – 11 Standard Terminology Relating to Reinforced Plastic Pultruded Products
  • D3919 – 15 Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry
  • D3920 – 12 Standard Test Method for Strontium in Water
  • D3923 – 08(2014) Standard Practices for Detecting Leaks in Reverse Osmosis and Nanofiltration Devices
  • D3924 – 16 Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials
  • D3925 – 02(2015) Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings
  • D3926 – 05(2011) Standard Test Methods for Percent Solids in Titanium Dioxide Slurries
  • D3928 – 00a(2014) Standard Test Method for Evaluation of Gloss or Sheen Uniformity
  • D3929 – 03(2015) Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
  • D3930 – 08(2015) Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes
  • D3931 – 08(2015) Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
  • D3933 – 98(2017) Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)
  • D3934 – 14 Standard Test Method for Flash/No Flash Test—Equilibrium Method by a Closed-Cup Apparatus
  • D3935 – 15 Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material
  • D3936 – 17 Standard Test Method for Resistance to Delamination of the Secondary Backing of Pile Yarn Floor Covering
  • D3937 – 12 Standard Test Method for Crimp Frequency of Manufactured Staple Fibers
  • D3938 – 18 Standard Guide for Determining or Confirming Care Instructions for Apparel and Other Textile Products
  • D3939/D3939M – 13(2017) Standard Test Method for Snagging Resistance of Fabrics (Mace)
  • D3941 – 14 Standard Test Method for Flash Point by the Equilibrium Method With a Closed-Cup Apparatus
  • D3942 – 03(2013) Standard Test Method for Determination of the Unit Cell Dimension of a Faujasite-Type Zeolite
  • D3943 – 10(2015) Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts
  • D3944 – 12(2017) Standard Test Method for Solidification Point of Petroleum Wax
  • D3948 – 14 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
  • D3948-RUS – 14 Стандартный метод определения характеристик водоотделения топлива для турбореактивных двигателей с помощью портативного сепарометра
  • D3950 – 17 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
  • D3951 – 15 Standard Practice for Commercial Packaging
  • D3953 – 15 Standard Specification for Strapping, Flat Steel and Seals
  • D3954 – 15 Standard Test Method for Dropping Point of Waxes
  • D3954-RUS – 15 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ ТЕМПЕРАТУРЫ КАПЛЕПАДЕНИЯ ВОСКА
  • D3955 – 13 Standard Specification for Electrical Insulating Varnishes
  • D3956 – 12 Standard Specification for Methane Thermophysical Property Tables
  • D3957 – 09(2015) Standard Practices for Establishing Stress Grades for Structural Members Used in Log Buildings
  • D3958 – 06(2016) Standard Test Methods for Rubber—Evaluation of BIIR and CIIR (Halogenated Isobutene—Isoprene Rubber)
  • D3958-RUS – 06(2016) СТАНДАРТНЫЕ МЕТОДЫ ИСПЫТАНИЙ КАУЧУКА — ОЦЕНКА ХАРАКТЕРИСТИК BIIR И CIIR (ГАЛОГЕНИРОВАННЫХ ИЗОБУТЕН–ИЗОПРЕНОВЫХ КАУЧУКОВ)
  • D3960 – 05(2013) Standard Practice for Determining Volatile Organic Compound (VOC)Content of Paints and Related Coatings
  • D3963/D3963M – 15 Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars
  • D3964 – 10(2015) Standard Practice for Selection of Coating Specimens for Appearance Measurements
  • D3965 – 16 Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
  • D3966/D3966M – 07(2013)e1 Standard Test Methods for Deep Foundations Under Lateral Load
  • D3967 – 16 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
  • D3969 – 01(2012) Standard Test Method for Zirconium in Paint Driers by EDTA Method
  • D3970 – 05(2017) Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination
  • D3971 – 89(2010) Standard Test Method for Dichloromethane-Soluble Matter in Cellulose
  • D3972 – 09(2015) Standard Test Method for Isotopic Uranium in Water by Radiochemistry
  • D3973 – 85(2017) Standard Test Method for Low-Molecular Weight Halogenated Hydrocarbons in Water
  • D3974 – 09(2015) Standard Practices for Extraction of Trace Elements from Sediments
  • D3975 – 93(2014) Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments
  • D3976 – 92(2015) Standard Practice for Preparation of Sediment Samples for Chemical Analysis
  • D3977 – 97(2013)e1 Standard Test Methods for Determining Sediment Concentration in Water Samples
  • D3977-RUS – 97(2013)e1 Стандартные методы определения концентрации осадка в пробах воды
  • D3978 – 04(2012) Standard Practice for Algal Growth Potential Testing with Pseudokirchneriella subcapitata
  • D3981 – 09a(2016) Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
  • D3982 – 08(2014) Standard Specification for Contact Molded “Fiberglass” (Glass Fiber Reinforced Thermosetting Resin) Ducts
  • D3983 – 98(2011) Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
  • D3984 – 13 Standard Specification for Ethane Thermophysical Property Tables
  • D3985 – 17 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
  • D3986 – 17 Standard Test Method for Barium in Brines, Seawater, and Brackish Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy
  • D3987 – 12 Standard Practice for Shake Extraction of Solid Waste with Water
  • D3988 – 05(2017) Standard Test Method for Vanadium in Paint Driers by EDTA Method
  • D3989 – 01(2012) Standard Test Method for Total Rare Earth Metals in Paint Driers by EDTA Method
  • D3990 – 12(2016) Standard Terminology Relating to Fabric Defects
  • D3991 – 94(2012)e1 Standard Specifications for Fineness of Wool or Mohair and Assignment of Grade
  • D3992 – 94(2012)e1 Standard Specifications for Fineness of Wool Top or Mohair Top and Assignment of Grade
  • D3994 – 14 Standard Performance Specification for Woven Swimwear Fabrics
  • D3995 – 14 Standard Performance Specification for Men’s and Women’s Knitted Career Apparel Fabrics: Dress and Vocational
  • D3996 – 14 Standard Performance Specification for Knit Swimwear Fabrics
  • D3997/D3997M – 16 Standard Practice for Preparing Coke Samples for Microscopical Analysis by Reflected Light
  • D3999/D3999M – 11e1 Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus
  • D4000 – 16 Standard Classification System for Specifying Plastic Materials
  • D4001 – 13 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
  • D4002 – 81(2016) Standard Practice for Evaluation of Buffable Shoe Polish
  • D4003 – 98(2015) Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems
  • D4004 – 06(2017) Standard Test Methods for Rubber—Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis
  • D4005 – 92(2015) Standard Test Method for Plastic-Coated Fabrics—Completeness of Fusion of PVC Dispersion Coatings
  • D4006 – 16e1 Standard Test Method for Water in Crude Oil by Distillation
  • D4006-RUS – 16e1 Стандартный метод определения содержания воды в сырой нефти с помощью перегонки
  • D4006-SP – 16e1 Método de prueba estándar para determinar agua en petróleo crudo por destilación
  • D4007 – 11(2016)e1 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
  • D4007-RUS – 11(2016)e1 Стандартный метод определения содержания воды и осадка в сырой нефти методом центрифугирования (лабораторная процедура)
  • D4007-SP – 11(2016)e1 Método de prueba estándar para la determinación de agua y sedimentos en petróleo crudo mediante el Método centrífugo (Procedimiento de Laboratorio)
  • D4008 – 16 Standard Guide for Measuring Anti-Soil Deposition Properties of Laundry Detergents
  • D4009 – 92(2017) Standard Guide for Foam Stability of Hand Dishwashing Detergents
  • D4012 – 15 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Water
  • D4014 – 03(2012) Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges
  • D4015 – 15e1 Standard Test Methods for Modulus and Damping of Soils by Fixed-Base Resonant Column Devices
  • D4016 – 14 Standard Test Method for Viscosity and Gel Time of Chemical Grouts by Rotational Viscometer (Laboratory Method)
  • D4017 – 02(2015) Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
  • D4018 – 17 Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
  • D4020 – 11 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
  • D4024 – 15 Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
  • D4025 – 08a(2013) Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection
  • D4026 – 06(2017) Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene
  • D4027 – 98(2011) Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
  • D4028/D4028M – 13 Standard Specification for Solar Screening Woven from Vinyl-Coated Fiber Glass Yarn
  • D4029/D4029M – 16 Standard Specification for Finished Woven Glass Fabrics
  • D4030/D4030M – 15 Standard Specification for Glass Fiber Cord and Sewing Thread
  • D4031 – 07(2012) Standard Test Method for Bulk Properties of Textured Yarns
  • D4032 – 08(2016) Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
  • D4035 – 14 Standard Performance Specification for Knitted Necktie and Scarf Fabrics
  • D4037 – 02(2013) Standard Performance Specification for Woven, Knitted, or Flocked Bedspread Fabrics
  • D4039 – 09(2015) Standard Test Method for Reflection Haze of High-Gloss Surfaces
  • D4040 – 10 Standard Test Method for Rheological Properties of Paste Printing and Vehicles by the Falling-Rod Viscometer
  • D4041/D4041M – 05(2017) Standard Practice for Determining Spray Patterns of Mechanical Pump Dispensers
  • D4042 – 93(2014) Standard Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils
  • D4043 – 17 Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques
  • D4044/D4044M – 15 Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifers
  • D4045 – 15 Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry
  • D4045-RUS – 15 Стандартный метод определения содержания серы в нефтепродуктах методом гидрогенолизаи и интенсиметрической колориметрии
  • D4046 – 14 Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry
  • D4046-RUS – 14 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ АЛКИЛНИТРАТА В ДИЗЕЛЬНЫХ ТОПЛИВАХ С ПОМОЩЬЮ СПЕКТРОФОТОМЕТРИИ
  • D4047 – 13 Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method
  • D4047-RUS – 13 Стандартный метод определения содержания фосфора в смазочных маслах и присадках с помощью фосфорномолибдата хинолина
  • D4048 – 16e1 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease
  • D4049 – 16 Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray
  • D4050 – 14 Standard Test Method for (Field Procedure) for Withdrawal and Injection Well Testing for Determining Hydraulic Properties of Aquifer Systems
  • D4051 – 10(2015) Standard Practice for Preparation of Low-Pressure Gas Blends
  • D4052 – 16 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
  • D4052-RUS – 16 Стандартный метод определения плотности, относительной плотности и плотности API (в градусах американского нефтяного института) жидкостей с помощью цифрового ареометра
  • D4052-SP – 16 Método de prueba estándar para la determinación de la densidad, la densidad relativa y la gravedad API de líquidos mediante densímetro digital
  • D4054 – 16 Standard Practice for Qualification and Approval of New Aviation Turbine Fuels and Fuel Additives
  • D4055 – 04(2013) Standard Test Method for Pentane Insolubles by Membrane Filtration
  • D4056 – 16 Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants
  • D4057 – 12 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
  • D4057-RUS – 12 Стандартная методика ручного отбора проб нефти и нефтепродуктов
  • D4058 – 96(2015) Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
  • D4058-RUS – 96(2015) СТАНДАРТНЫЙ МЕТОД ИСПЫТАНИЙ КАТАЛИЗАТОРОВ И НОСИТЕЛЕЙ КАТАЛИЗАТОРОВ НА ИСТИРАНИЕ И АБРАЗИВНЫЙ ИЗНОС
  • D4059 – 00(2010) Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography
  • D4060 – 14 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
  • D4061 – 13 Standard Test Method for Retroreflectance of Horizontal Coatings
  • D4062 – 11(2016) Standard Test Method for Leveling of Paints by Draw-Down Method
  • D4063 – 99(2016) Standard Specification for Pressboard for Electrical Insulating Purposes
  • D4065 – 12 Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures
  • D4065-RUS – 12 Стандартная методика для пластмасс: динамико-механические свойства: определение и отчет о процедурах
  • D4066 – 13 Standard Classification System for Nylon Injection and Extrusion Materials (PA)
  • D4067 – 16 Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods
  • D4068 – 17 Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane
  • D4069 – 95(2014) Standard Specification for Impregnated Activated Carbon Used to Remove Gaseous Radio-Iodines from Gas Streams
  • D4070 – 15 Standard Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures
  • D4071 – 84(2016) Standard Practice for Use of Portland Cement Concrete Bridge Deck Water Barrier Membrane Systems
  • D4072 – 98(2013) Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch
  • D4072-RUS – 98(2013) Стандартный метод определения содержания нерастворимых в толуоле компонентов битума и битумного пека
  • D4073 – 06(2013) Standard Test Method for Tensile-Tear Strength of Bituminous Roofing Membranes
  • D4074/D4074M – 11(2015) Standard Test Method for Bitumen and Aggregate Content of Bitumen-Aggregate Mixtures From Roofing Samples
  • D4075 – 06(2017) Standard Test Methods for Rubber Compounding Materials—Flame Atomic Absorption Analysis—Determination of Metals
  • D4077 – 17 Standard Specification for Cumene (Isopropylbenzene)
  • D4078 – 02(2015) Standard Specification for Water Emulsion Floor Polish
  • D4079 – 00(2016) Standard Specification for Vapor-Degreasing Grade Methylene Chloride
  • D4080 – 15 Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade
  • D4080-RUS – 15 Стандартная спецификация на трихлорэтилен (технический и для парового обезжиривания)
  • D4081 – 16 Standard Specification for Drycleaning-Grade Perchloroethylene
  • D4082 – 10(2017) Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Nuclear Power Plants
  • D4083 – 89(2016) Standard Practice for Description of Frozen Soils (Visual-Manual Procedure)
  • D4084 – 07(2017) Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)
  • D4085 – 93(2013) Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry
  • D4086 – 92a(2012) Standard Practice for Visual Evaluation of Metamerism
  • D4092 – 07(2013) Standard Terminology for Plastics: Dynamic Mechanical Properties
  • D4093 – 95(2014) Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
  • D4095 – 97(2014) Standard Practice for Use of the Refractometer for Determining Nonvolatile Matter (Total Solids) in Floor Polishes
  • D4096 – 17 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler Method)
  • D4097 – 01(2010) Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
  • D4101 – 17 Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials
  • D4102 – 82(2015) Standard Test Method for Thermal Oxidative Resistance of Carbon Fibers
  • D4103 – 17 Standard Practice for Preparation of Substrate Surfaces for Coefficient of Friction Testing
  • D4104 – 17 Standard Test Method (Analytical Procedure) for Determining Transmissivity of Nonleaky Confined Aquifers by Overdamped Well Response to Instantaneous Change in Head (Slug Tests)
  • D4105/D4105M – 15e1 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method
  • D4106 – 15 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method
  • D4107 – 08(2013) Standard Test Method for Tritium in Drinking Water
  • D4111 – 12 Standard Performance Specification for Woven Napery and Tablecloth Fabrics: Household and Institutional
  • D4113 – 02(2013) Standard Performance Specification for Woven Slipcover Fabrics
  • D4114 – 14 Standard Performance Specification for Woven Flat Lining Fabrics for Women’s and Girls’ Apparel
  • D4115 – 14 Standard Performance Specification for Women’s and Girls’ Knitted and Woven Dress Glove Fabrics
  • D4116 – 14 Standard Performance Specification for Women’s and Girls’ Knitted and Woven Corset-Girdle-Combination Fabrics
  • D4118 – 15 Standard Performance Specification for Women’s Woven Coverall, Dungaree, Overall, and Shop-Coat Fabrics
  • D4119 – 14 Standard Performance Specification for Men’s and Boys’ Knitted Dress Shirt Fabrics
  • D4120 – 07(2012) Standard Test Method for Fiber Cohesion in Roving, Sliver, and Top in Dynamic Tests
  • D4122 – 17e1 Standard Practice for Carbon Black—Evaluation of an Industry Reference Black
  • D4124 – 09(2018) Standard Test Method for Separation of Asphalt into Four Fractions
  • D4125/D4125M – 10(2016) Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method
  • D4127 – 12 Standard Terminology Used with Ion-Selective Electrodes
  • D4128 – 06(2012) Standard Guide for Identification and Quantitation of Organic Compounds in Water by Combined Gas Chromatography and Electron Impact Mass Spectrometry
  • D4128-RUS – 06(2012) Стандартное руководство по идентификации и определению содержания органических веществ в воде с помощью омбинированной газовой хроматографии и масс-спектрометрии с ионизацией электронным ударом
  • D4129 – 05(2013) Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
  • D4130 – 15 Standard Test Method for Sulfate Ion in Brackish Water, Seawater, and Brines
  • D4131 – 84(2014) Standard Practice for Sampling Fish with Rotenone
  • D4132 – 82(2012) Standard Practice for Sampling Phytoplankton with Conical Tow Nets
  • D4133 – 82(2012) Standard Practice for Sampling Phytoplankton with Pumps
  • D4134 – 82(2012) Standard Practice for Sampling Phytoplankton with a Clarke-Bumpus Plankton Sampler
  • D4135 – 82(2012) Standard Practice for Sampling Phytoplankton With Depth-Integrating Samplers
  • D4136 – 82(2012) Standard Practice for Sampling Phytoplankton with Water-Sampling Bottles
  • D4137 – 82(2012) Standard Practice for Preserving Phytoplankton Samples
  • D4138 – 07a(2017) Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means
  • D4139 – 04(2014) Standard Guide for Determining Volatile and Nonvolatile Content of Pigments
  • D4140 – 07(2013) Standard Guide for Determining Volatile and Nonvolatile Content of Driers, Drying Oils, Naval Stores, and Solvents
  • D4141/D4141M – 14 Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings
  • D4142 – 89(2017) Standard Guide for Testing Epoxy Resins
  • D4143 – 16 Standard Guide for Testing Latex Vehicles
  • D4144 – 94(2014) Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing
  • D4145 – 10 Standard Test Method for Coating Flexibility of Prepainted Sheet
  • D4146 – 10 Standard Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel
  • D4147 – 99(2013) Standard Practice for Applying Coil Coatings Using The Wire-Wound Drawdown Bar
  • D4148 – 82(2012) Standard Test Method for Analysis of Phytoplankton in Surface Water by the Sedgwick-Rafter Method
  • D4149 – 82(2012) Standard Classification for Sampling Phytoplankton in Surface Waters
  • D4150 – 08(2016) Standard Terminology Relating to Gaseous Fuels
  • D4151 – 18 Standard Test Method for Flammability of Blankets
  • D4153 – 14 Standard Performance Specification for Men’s, Women’s, and Children’s Woven Handkerchief Fabrics
  • D4154 – 14 Standard Performance Specification for Men’s and Boys’ Knitted and Woven Beachwear and Sports Shirt Fabrics
  • D4155 – 14 Standard Performance Specification for Women’s and Girls’ Woven Sportswear, Shorts, Slacks, and Suiting Fabrics
  • D4156 – 14 Standard Performance Specification for Women’s and Girls’ Knitted Sportswear Fabrics
  • D4157 – 13(2017) Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method)
  • D4158 – 08(2016) Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)
  • D4161 – 14 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
  • D4164 – 13 Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
  • D4165 – 06(2012) Standard Test Method for Cyanogen Chloride in Water 
  • D4167 – 15 Standard Specification for Fiber-Reinforced Plastic Fans and Blowers
  • D4168 – 95(2015) Standard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials
  • D4169 – 16 Standard Practice for Performance Testing of Shipping Containers and Systems
  • D4170 – 16 Standard Test Method for Fretting Wear Protection by Lubricating Greases
  • D4171 – 16a Standard Specification for Fuel System Icing Inhibitors
  • D4172 – 94(2016) Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)
  • D4174 – 17 Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems
  • D4175 – 17ae1 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
  • D4176 – 04(2014) Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
  • D4176-RUS – 04(2014) Стандартный метод определения свободной воды и загрязнения твердыми частицами в дистиллятных топливах (процедура визуального контроля)
  • D4177 – 16e1 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
  • D4177-RUS – 16e1 СТАНДАРТНАЯ МЕТОДИКА АВТОМАТИЧЕСКОГО ОТБОРА ПРОБ НЕФТИ И НЕФТЕПРОДУКТОВ
  • D4178 – 82(2017) Standard Practice for Calibrating Moisture Analyzers
  • D4179 – 11(2017) Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
  • D4180 – 13 Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
  • D4185 – 17 Standard Test Method for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry
  • D4186/D4186M – 12e1 Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading
  • D4188 – 13 Standard Practice for Performing Pressure In-Line Coagulation-Flocculation-Filtration Test in Water
  • D4189 – 07(2014) Standard Test Method for Silt Density Index (SDI) of Water
  • D4189-RUS – 07(2014) Стандартный метод определения индекса плотности взвешенных частиц (ИПВЧ) в воде
  • D4190 – 15 Standard Test Method for Elements in Water by Direct-Current Plasma Atomic Emission Spectroscopy
  • D4191 – 15 Standard Test Method for Sodium in Water by Atomic Absorption Spectrophotometry
  • D4191-RUS – 15 Стандартный метод определения натрия в воде с помощью атомно-абсорбционной спектрофотометрии
  • D4192 – 15 Standard Test Method for Potassium in Water by Atomic Absorption Spectrophotometry
  • D4192-RUS – 15 Стандартный метод определения содержания калия в воде с помощью атомно-абсорбционной спектрофотометрии
  • D4193 – 08(2013)e1 Standard Test Method for Thiocyanate in Water
  • D4194 – 03(2014) Standard Test Methods for Operating Characteristics of Reverse Osmosis and Nanofiltration Devices
  • D4195 – 08(2014) Standard Guide for Water Analysis for Reverse Osmosis and Nanofiltration Application
  • D4196 – 05(2011) Standard Test Method for Confirming the Sterility of Membrane Filters
  • D4198 – 82(2011) Standard Test Methods for Evaluating Absorbent Pads Used with Membrane Filters for Bacteriological Analysis and Growth
  • D4199 – 82(2011) Standard Test Methods for Autoclavability of Membrane Filters
  • D4200 – 82(2011) Standard Test Method for Evaluating Inhibitory Effects of Ink Grids on Membrane Filters
  • D4203 – 17 Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials
  • D4204 – 16 Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study
  • D4206 – 96(2013) Standard Test Method for Sustained Burning of Liquid Mixtures Using the Small Scale Open-Cup Apparatus
  • D4208 – 13 Standard Test Method for Total Chlorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method
  • D4209 – 07(2013) Standard Practice for Determining Volatile and Nonvolatile Content of Cellulosics, Emulsions, Resin Solutions, Shellac, and Varnishes
  • D4211 – 82(2012) Classification for Fish Sampling
  • D4212 – 16 Standard Test Method for Viscosity by Dip-Type Viscosity Cups
  • D4213 – 08(2016) Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss
  • D4214 – 07(2015) Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
  • D4215 – 07(2013) Standard Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures
  • D4216 – 17 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds
  • D4217 – 07(2017) Standard Test Method for Gel Time of Thermosetting Coating Powder
  • D4218 – 15 Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique
  • D4220/D4220M – 14 Standard Practices for Preserving and Transporting Soil Samples
  • D4221 – 17 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer
  • D4222 – 03(2015)e1 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
  • D4223/D4223M – 12 Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils
  • D4226 – 16 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products
  • D4227 – 05(2017) Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces
  • D4228 – 05(2017) Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces
  • D4230 – 02(2012) Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
  • D4231 – 14 Standard Practice for Evaluation of Launderable Woven Dress Shirts and Sports Shirts
  • D4232 – 14 Standard Performance Specification for Men’s and Women’s Dress and Vocational Career Apparel Fabrics
  • D4236 – 94(2016) Standard Practice for Labeling Art Materials for Chronic Health Hazards
  • D4239 – 17 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
  • D4239-RUS – 17 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ СОДЕРЖАНИЯ СЕРЫ В АНАЛИЗИРУЕМОЙ ПРОБЕ УГЛЯ И КОКСА ПОСРЕДСТВОМ ВЫСОКОТЕМПЕРАТУРНОГО СЖИГАНИЯ В ТРУБЧАТОЙ ПЕЧИ
  • D4242 – 07(2017) Standard Test Method for Inclined Plate Flow for Thermosetting Coating Powders
  • D4243 – 16 Standard Test Method for Measurement of Average Viscometric Degree of Polymerization of New and Aged Electrical Papers and Boards
  • D4245 – 08(2013) Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Dry/75°C Wet Operation
  • D4246 – 14 Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90°C Operation
  • D4251 – 89(2016) Standard Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration
  • D4252 – 89(2017) Standard Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates
  • D4253 – 16 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
  • D4254 – 16 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
  • D4255/D4255M – 15a Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
  • D4258 – 05(2017) Standard Practice for Surface Cleaning Concrete for Coating
  • D4259 – 88(2012) Standard Practice for Abrading Concrete
  • D4259-RUS – 88(2012) Стандартная методика очистки поверхности бетона
  • D4260 – 05(2017) Standard Practice for Liquid and Gelled Acid Etching of Concrete
  • D4261 – 05(2012) Standard Practice for Surface Cleaning Concrete Masonry Units for Coating
  • D4262 – 05(2012) Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces
  • D4263 – 83(2012) Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method
  • D4265 – 14 Standard Guide for Evaluating Stain Removal Performance in Home Laundering
  • D4266 – 17 Standard Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins
  • D4267 – 07(2015) Standard Specification for Labels for Small-Volume (100 mL or Less) Parenteral Drug Containers
  • D4272/D4272M – 15 Standard Test Method for Total Energy Impact of Plastic Films by Dart Drop
  • D4273 – 11 Standard Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols
  • D4274 – 16 Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols
  • D4275 – 17 Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene–Vinyl Acetate (EVA) Copolymers by Gas Chromatography
  • D4276 – 02(2012) Standard Practice for Confined Area Entry
  • D4279 – 95(2017) Standard Test Methods for Water Vapor Transmission of Shipping Containers—Constant and Cycle Methods
  • D4280 – 15 Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers
  • D4282 – 15 Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion
  • D4282-RUS – 15 Стандартный метод определения содержания свободного цианида в воде и сточных водах с помощью микродиффузии
  • D4283 – 98(2015) Standard Test Method for Viscosity of Silicone Fluids
  • D4284 – 12(2017)e1 Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry
  • D4285 – 83(2012) Standard Test Method for Indicating Oil or Water in Compressed Air
  • D4285-RUS – 83(2012) Стандартный метод испытания для определения наличия масла и воды в сжатом воздухе
  • D4286 – 08(2015) Standard Practice for Determining Coating Contractor Qualifications for Nuclear Powered Electric Generation Facilities
  • D4287 – 00(2014) Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
  • D4288 – 02(2012) Standard Specification for Calcium Borosilicate Pigments
  • D4289 – 13(2014)e1 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
  • D4290 – 15 Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions
  • D4291 – 04(2017) Standard Test Method for Trace Ethylene Glycol in Used Engine Oil
  • D4292 – 17 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke
  • D4293 – 15 Standard Specification for Phosphate Ester Based Fluids for Turbine Lubrication and Steam Turbine Electro-Hydraulic Control (EHC) Applications
  • D4294 – 16e1 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
  • D4294-RUS – 16e1 Стандартный метод определения содержания серы в нефти и нефтепродуктах с помощью энергодисперсионной рентгеновской люминесцентной спектрометрии
  • D4294-SP – 16e1 Método de prueba estándar para determinación de azufre en petróleo y productos derivados del petróleo mediante espectrofluorimetría de rayos X por dispersión de energía
  • D4295 – 89(2017) Standard Classification for Rubber Compounding Materials—Zinc Oxide
  • D4296 – 83(2015)e1 Standard Practice for Sampling Pitch
  • D4297 – 15 Standard Practice for Sampling and Handling Bisphenol A(4,4′ -Isopropylidinediphenol)
  • D4298 – 04(2014)e1 Standard Guide for Intercomparing Permeation Tubes to Establish Traceability
  • D4300 – 01(2013) Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
  • D4301 – 05(2013) Standard Test Method for Total Chlorine in Epoxy Resins and Compounds
  • D4302 – 14 Standard Specification for Artists’ Oil, Resin-Oil, and Alkyd Paints
  • D4303 – 10(2016) Standard Test Methods for Lightfastness of Colorants Used in Artists’ Materials
  • D4304 – 17 Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines
  • D4306 – 15 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
  • D4306-RUS – 15 Стандартная методика испытаний контейнеров для отбора проб авиационного топлива на влияние микропримесей
  • D4307 – 17 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
  • D4307-RUS – 17 CТАНДАРТНАЯ МЕТОДИКА ПРИГОТОВЛЕНИЯ ЖИДКИХ СМЕСЕЙ ДЛЯ ПРИМЕНЕНИЯ В КАЧЕСТВЕ АНАЛИТИЧЕСКИХ ЭТАЛОНОВ
  • D4308 – 13 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
  • D4308-RUS – 13 Стандартный метод определения удельной электропроводности жидких углеводородов с помощью прецизионного измерителя
  • D4309 – 12 Standard Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water
  • D4310 – 10(2015) Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils
  • D4310-RUS – 10(2015) СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ СВОЙСТВ К ОСАДКООБРАЗОВАНИЮ И КОРРОЗИИ В ИНГИБИРОВАННЫХ МИНЕРАЛЬНЫХ МАСЛАХ
  • D4311/D4311M – 15 Standard Practice for Determining Asphalt Volume Correction to a Base Temperature
  • D4312 – 15 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)
  • D4313 – 17 Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene (CM) Jackets For Wire and Cable
  • D4315 – 94(2017) Standard Test Methods for Rubber Compounding Material—Zinc Oxide
  • D4316 – 95(2016) Standard Specification for Elastomeric Water Bottles
  • D4317 – 16 Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives
  • D4318 – 17 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
  • D4321 – 15 Standard Test Method for Package Yield of Plastic Film
  • D4323 – 15 Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance
  • D4325 – 13 Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
  • D4326 – 13 Standard Test Method for Major and Minor Elements in Coal and Coke Ash By X-Ray Fluorescence
  • D4326-RUS – 13 Стандартный метод определения содержания основных и неосновных элементов в угольной и коксовой золе с помощью рентгеновской флуоресценции
  • D4327 – 17 Standard Test Method for Anions in Water by Suppressed Ion Chromatography
  • D4328 – 08(2013) Standard Practice for Calculation of Supersaturation of Barium Sulfate, Strontium Sulfate, and Calcium Sulfate Dihydrate (Gypsum) in Brackish Water, Seawater, and Brines
  • D4329 – 13 Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics
  • D4330 – 94(2017) Standard Practice for Evaluation of Fiberglass Boat Polish and Wax
  • D4332 – 14 Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing
  • D4333/D4333M – 05(2010)e1 Test Method for the Compatibility of Mechanical Pump Dispenser Components
  • D4334 – 05(2010) Standard Test Method for the Determination of the Dip Tube Retention of a Mechanical Pump Dispenser
  • D4335 – 99(2010) Standard Test Method for Determination of Component Retention of a Mechanical Pump Dispenser
  • D4336 – 05(2010) Standard Test Methods for Determination of the Output Per Stroke of a Mechanical Pump Dispenser
  • D4337 – 89(2017) Standard Test Methods for Analysis of Linear Detergent Alkylates
  • D4338 – 97(2016) Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
  • D4339 – 01(2013) Standard Test Method for Determination of the Odor of Adhesives
  • D4340 – 10 Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
  • D4340-RUS – 10 Стандартный метод испытаний на коррозию литейных алюминиевых сплавов в охлаждающих жидкостях для двигателей в условиях теплообмена
  • D4349 – 16 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials
  • D4350 – 16 Standard Test Method for Corrosivity Index of Plastics and Fillers
  • D4354 – 12 Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products(RECPs) for Testing
  • D4355/D4355M – 14 Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus
  • D4359 – 90(2012) Standard Test Method for Determining Whether a Material Is a Liquid or a Solid
  • D4360 – 11 Standard Specification for Methyl n-Amyl Ketone
  • D4361 – 10 Standard Test Method for Apparent Tack of Printing Inks and Vehicles by a Three-Roller Tackmeter
  • D4362 – 13 Standard Specification for Propane Thermophysical Property Tables
  • D4363 – 17 Standard Specification for Thermoplastic Chlorinated Polyethylene (CM) Jacket for Wire and Cable
  • D4364 – 13 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight
  • D4365 – 13 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
  • D4366 – 16 Standard Test Methods for Hardness of Organic Coatings by Pendulum Damping Tests
  • D4367 – 02(2012) Standard Test Method for Benzene in Hydrocarbon Solvents by Gas Chromatography
  • D4370 – 01(2017) Standard Test Methods for Acid and Base Milliequivalent Content of Electrocoat Bath
  • D4371 – 06(2012) Standard Test Method for Determining the Washability Characteristics of Coal
  • D4373 – 14 Standard Test Method for Rapid Determination of Carbonate Content of Soils
  • D4375 – 96(2011) Standard Practice for Basic Statistics in Committee D-19 on Water
  • D4376 – 15 Standard Specification for Vapor-Degreasing Grade Perchloroethylene
  • D4377 – 00(2011) Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
  • D4377-RUS – 00(2011) Стандартный метод определения содержания воды в сырой нефти с помощью потенциометрического титрования по методуКарла Фишера
  • D4378 – 13 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines
  • D4380 – 12 Standard Test Method for Density of Bentonitic Slurries
  • D4381/D4381M – 12 Standard Test Method for Sand Content by Volume of Bentonitic Slurries
  • D4382 – 12 Standard Test Method for Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace
  • D4383 – 12 Standard Specification for Plowable, Raised Retroreflective Pavement Markers
  • D4385 – 13 Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products
  • D4386 – 95(2016) Standard Practice for Application of Floor Polishes to Maintain Multilayer Composite Tile or Flooring
  • D4388 – 13 Standard Specification for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
  • D4389/D4389M – 16 Standard Specification for Finished Glass Fabrics Woven From Rovings
  • D4391 – 16e1 Standard Terminology Relating to The Burning Behavior of Textiles
  • D4394 – 17 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Rigid Plate Loading Method
  • D4395 – 17 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Flexible Plate Loading Method
  • D4396 – 15 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications
  • D4397 – 16 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications
  • D4399 – 05(2017) Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
  • D4400 – 99(2012)e1 Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator
  • D4402/D4402M – 15 Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
  • D4403 – 12 Standard Practice for Extensometers Used in Rock
  • D4404 – 10 Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry
  • D4409 – 95(2014) Standard Test Method for Velocity Measurements of Water in Open Channels with Rotating Element Current Meters
  • D4410 – 16 Terminology for Fluvial Sediment
  • D4411 – 03(2014)e1 Standard Guide for Sampling Fluvial Sediment in Motion
  • D4412 – 15 Standard Test Methods for Sulfate-Reducing Bacteria in Water and Water-Formed Deposits
  • D4414 – 95(2013) Standard Practice for Measurement of Wet Film Thickness by Notch Gages
  • D4416 – 09(2017) Standard Specification for Acrylic Acid
  • D4417 – 14 Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
  • D4417-RUS – 14 Стандартные методы полевых измерений профиля поверхности стали, зачищенной пескоструйной обработкой
  • D4418 – 17 Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines
  • D4419 – 90(2015) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
  • D4419-RUS – 90(2015) СТАНДАРТНЫЙ МЕТОД ИЗМЕРЕНИЯ ТЕМПЕРАТУР ФАЗОВОГО ПЕРЕХОДА НЕФТЯНЫХ ПАРАФИНОВ С ПОМОЩЬЮ ДИФФЕРЕНЦИАЛЬНОЙ СКАНИРУЮЩЕЙ КАЛОРИМЕТРИИ (ДСК)
  • D4422 – 13 Standard Test Method for Ash in Analysis of Petroleum Coke
  • D4423 – 10(2015) Standard Test Method for Determination of Carbonyls in C4 Hydrocarbons
  • D4424 – 09(2014) Standard Test Method for Butylene Analysis by Gas Chromatography
  • D4425 – 09(2014) Standard Test Method for Oil Separation from Lubricating Grease by Centrifuging (Koppers Method)
  • D4426 – 01(2013) Standard Test Method for Determination of Percent Nonvolatile Content of Liquid Phenolic Resins Used for Wood Laminating
  • D4427 – 13(2017) Standard Classification of Peat Samples by Laboratory Testing
  • D4428/D4428M – 14 Standard Test Methods for Crosshole Seismic Testing
  • D4429 – 09a Standard Test Method for CBR (California Bearing Ratio) of Soils in Place
  • D4430 – 00(2015) Standard Practice for Determining the Operational Comparability of Meteorological Measurements
  • D4434/D4434M – 15 Standard Specification for Poly(Vinyl Chloride) Sheet Roofing
  • D4435 – 13e1 Standard Test Method for Rock Bolt Anchor Pull Test
  • D4436 – 13e1 Standard Test Method for Rock Bolt Long-Term Load Retention Test
  • D4437/D4437M – 16 Standard Practice for Non-destructive Testing (NDT) for Determining the Integrity of Seams Used in Joining Flexible Polymeric Sheet Geomembranes
  • D4438 – 13 Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting
  • D4439 – 17 Standard Terminology for Geosynthetics
  • D4440 – 15 Standard Test Method for Plastics: Dynamic Mechanical Properties Melt Rheology
  • D4441 – 15 Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene
  • D4442 – 16 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials
  • D4443 – 13 Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography
  • D4444 – 13 Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters
  • D4445 – 10(2015) Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)
  • D4446/D4446M – 13 Standard Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments
  • D4447 – 15 Standard Guide for Disposal of Laboratory Chemicals and Samples
  • D4448 – 01(2013) Standard Guide for Sampling Ground-Water Monitoring Wells
  • D4449 – 15 Standard Test Method for Visual Evaluation of Gloss Differences Between Surfaces of Similar Appearance
  • D4450 – 85(2012) Standard Test Method for Analysis of Zinc Hydroxy Phosphite Pigment
  • D4451 – 02(2014) Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing
  • D4452 – 14 Standard Practice for X-Ray Radiography of Soil Samples
  • D4453 – 17 Standard Practice for Handling of High Purity Water Samples
  • D4455 – 85(2014) Standard Test Method for Enumeration of Aquatic Bacteria by Epifluorescence Microscopy Counting Procedure
  • D4456 – 17 Standard Test Methods for Physical and Chemical Properties of Powdered Ion Exchange Resins
  • D4457 – 02(2014) Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph
  • D4458 – 15 Standard Test Method for Chloride Ions in Brackish Water, Seawater, and Brines
  • D4459 – 12 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications
  • D4460 – 97(2015) Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods
  • D4462 – 02(2012) Standard Specification for Zinc Hydroxy Phosphite Pigment
  • D4463/D4463M – 96(2013)e1 Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts
  • D4463/D4463M-RUS – 96(2013)e1 Стандартное руководство по свободной паровой дезактивации металлов свежих псевдоожиженных катализаторов крекинга
  • D4464 – 15 Standard Test Method for Particle Size Distribution of Catalytic Materials by Laser Light Scattering
  • D4464-RUS – 15 Стандартный метод определения гранулометрического состава каталитических материалов по рассеянию лазерного излучения
  • D4465 – 05(2015) Standard Performance Specification for Zippers for Dungarees, Jeans and Work Trousers
  • D4466 – 02(2012) Standard Terminology Related to Multicomponent Textile Fibers
  • D4468 – 85(2015) Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry
  • D4468-RUS – 85(2015) Стандартный метод определения общего содержания серы в газообразных топливах с помощью гидрогенолиза и ратеометрической колориметрии
  • D4469 – 17 Standard Practice for Calculating Percent Asphalt Absorption by the Aggregate in Asphalt Mixtures
  • D4470 – 97(2010) Standard Test Method for Static Electrification
  • D4471 – 10 Standard Test Method for Pyridine Bases in Cresylic Acid by Direct Titration
  • D4472 – 08(2014) Standard Guide for Recordkeeping for Reverse Osmosis and Nanofiltration Systems
  • D4473 – 08(2016) Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior
  • D4475 – 02(2016) Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method
  • D4476/D4476M – 14 Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods
  • D4477 – 16 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit
  • D4479/D4479M – 07(2012)e1 Standard Specification for Asphalt Roof Coatings – Asbestos-Free
  • D4481 – 10(2015) Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts
  • D4482 – 11(2017) Standard Test Method for Rubber Property—Extension Cycling Fatigue
  • D4483 – 14a Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
  • D4483-RUS – 14a Стандартная методика оценки сходимости результатов стандартных методов испытаний в отраслях промышленности, производящих резину и технический углерод
  • D4485 – 16 Standard Specification for Performance of Active API Service Category Engine Oils
  • D4485-RUS – 16 CТАНДАРТНАЯ СПЕЦИФИКАЦИЯ НА РАБОЧИЕ ХАРАКТЕРИСТИКИ ИСПОЛЬЗУЕМЫХ В НАСТОЯЩЕЕ ВРЕМЯ МОТОРНЫХ МАСЕЛ ЭКСПЛУАТАЦИОННЫХ КАТЕГОРИЙ API (АМЕРИКАНСКОГО ИНСТИТУТА НЕФТИ)
  • D4486 – 10 Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids
  • D4487 – 90(2014) Standard Test Methods for Analysis of Calcium Borosilicate
  • D4489 – 95(2017) Standard Practices for Sampling of Waterborne Oils
  • D4490 – 96(2016) Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
  • D4491/D4491M – 17 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
  • D4493 – 16 Standard Test Method for Solidification Point of Bisphenol A(4,4′-Isopropylidenediphenol)
  • D4494 – 95(2015) Standard Test Method for Detecting Residual Odor of Drycleaning Grade Perchloroethylene
  • D4495 – 16 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
  • D4496 – 13 Standard Test Method for D-C Resistance or Conductance of Moderately Conductive Materials
  • D4497 – 10 Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method)
  • D4498 – 07(2015) Standard Test Method for Heat-Fail Temperature in Shear of Hot Melt Adhesives
  • D4499 – 07(2015) Standard Test Method for Heat Stability of Hot-Melt Adhesives
  • D4501 – 01(2014) Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
  • D4502 – 92(2011) Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints
  • D4504 – 94(2011) Standard Specification for Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods
  • D4505 – 12(2017) Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life
  • D4506 – 13e1 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Radial Jacking Test
  • D4511 – 11 Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat
  • D4512 – 03(2013)e1 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
  • D4512-RUS – 03(2013)e1 Стандартный метод определения объемной плотности упаковки после виброуплотнения мелкозернистого катализатора, частиц подложки катализатора и порошка
  • D4513 – 11(2017) Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
  • D4514 – 12 Standard Specification for Friction Tape
  • D4516 – 00(2010) Standard Practice for Standardizing Reverse Osmosis Performance Data
  • D4517 – 15 Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy
  • D4519 – 16 Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity
  • D4520 – 13 Standard Practice for Determining Water Injectivity Through the Use of On-Site Floods
  • D4522 – 14 Standard Performance Specification for Feather and Down Fillings for Textile Products
  • D4524 – 86(2012) Standard Test Method for Composition of Plumage
  • D4525 – 13e1 Standard Test Method for Permeability of Rocks by Flowing Air
  • D4526 – 12 Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography
  • D4527 – 99(2016) Standard Test Method for Carbon Black—Solvent Extractables
  • D4527-RUS – 99(2016) Стандартный метод определения экстрагируемых растворителем веществ из технического углерода
  • D4528 – 88(2017) Standard Classification for Rubber Compounding Materials—Sulfur
  • D4529 – 17 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
  • D4529-RUS – 17 Стандартный метод оценки низшей теплоты сгорания авиационного топлива
  • D4530 – 15 Standard Test Method for Determination of Carbon Residue (Micro Method)
  • D4530-SP – 15 Método de prueba estándar para determinación de residuos de carbono (Método Micro)
  • D4531 – 15 Standard Test Methods for Bulk and Dry Density of Peat and Peat Products
  • D4532 – 15 Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers
  • D4533/D4533M – 15 Standard Test Method for Trapezoid Tearing Strength of Geotextiles
  • D4535 – 13e1 Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer
  • D4537 – 12 Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating and Lining Work Inspection in Nuclear Facilities
  • D4538 – 15 Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
  • D4539 – 17 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
  • D4541 – 17 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
  • D4542 – 15 Standard Test Methods for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer
  • D4544 – 12 Standard Practice for Estimating Peat Deposit Thickness
  • D4546 – 14 Standard Test Methods for One-Dimensional Swell or Collapse of Soils
  • D4547 – 15 Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds
  • D4548 – 11 Standard Test Method for Anion-Cation Balance of Mixed Bed Ion-Exchange Resins
  • D4549 – 15 Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
  • D4551 – 17 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane
  • D4552/D4552M – 10(2016)e1 Standard Practice for Classifying Hot-Mix Recycling Agents
  • D4554 – 12 Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities
  • D4555 – 10 Standard Test Method for Determining Deformability and Strength of Weak Rock by an In Situ Uniaxial Compressive Test
  • D4559 – 99(2010) Standard Test Method for Volatile Matter in Silicone Fluid
  • D4561 – 11 Standard Practice for Quality Control Systems for Organizations Producing and Applying Bituminous Paving Materials
  • D4562 – 01(2013) Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
  • D4563 – 02(2015) Standard Test Method for Determination by Atomic Absorption Spectroscopy of Titanium Dioxide Content of Pigments Recovered From Whole Paint
  • D4565 – 15 Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
  • D4566 – 14 Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
  • D4567 – 03(2013) Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
  • D4568 – 13 Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds And Polyolefin Wire and Cable Materials
  • D4569 – 06(2017) Standard Test Method for Rubber Compounding Materials—Determination of Acidity in Sulfur
  • D4570 – 02(2017) Standard Test Method for Rubber Chemicals—Determination of Particle Size of Sulfur by Sieving (Dry)
  • D4571 – 06(2017) Standard Test Methods for Rubber Compounding Materials—Determination of Volatile Material
  • D4572 – 89(2017) Standard Test Method for Rubber Chemicals—Wet Sieve Analysis of Sulfur
  • D4573 – 03(2014) Standard Test Method for Rubber Chemicals—Determination of Oil Content in Oil-Treated Sulfur
  • D4574 – 06(2017) Standard Test Methods for Rubber Compounding Materials—Determination of Ash Content
  • D4575 – 09(2015) Standard Test Methods for Rubber Deterioration—Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers
  • D4576 – 16 Standard Test Method for Mold Growth Resistance of Wet Blue and Wet White
  • D4577 – 05(2010) Standard Test Method for Compression Resistance of a Container Under Constant Load
  • D4578 – 06(2017) Standard Test Methods for Rubber Chemicals—Determination of Percent Sulfur by Extraction
  • D4579 – 00(2017) Standard Practice for Handling an Acid Degreaser or Still
  • D4580/D4580M – 12 Standard Practice for Measuring Delaminations in Concrete Bridge Decks by Sounding
  • D4582 – 10 Standard Practice for Calculation and Adjustment of the Stiff and Davis Stability Index for Reverse Osmosis
  • D4583 – 95(2015) Standard Practice for Carbon Black—Calculation of Process Indexes From an Analysis of Process Control Data
  • D4584 – 05(2015) Standard Test Method for Measuring Apparent pH of Electrocoat Baths
  • D4585/D4585M – 13 Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation
  • D4586/D4586M – 07(2012)e1 Standard Specification for Asphalt Roof Cement, Asbestos-Free
  • D4587 – 11 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
  • D4590 – 13 Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol In Styrene Monomer or AMS (α–Methylstyrene) by Spectrophotometry
  • D4590-RUS – 13 Стандартный метод калориметрического определения пара-трет-бутилкатехина в стироловом мономере или альфа-метилстироле с помощью спектрофотометрии
  • D4591 – 17 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
  • D4592 – 12(2017) Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life
  • D4594/D4594M – 96(2015)e1 Standard Test Method for Effects of Temperature on Stability of Geotextiles
  • D4595 – 17 Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
  • D4596 – 09(2015) Standard Practice for Collection of Channel Samples of Coal in a Mine
  • D4597 – 10(2015) Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers
  • D4599 – 14 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
  • D4600 – 95(2016) Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
  • D4601/D4601M – 04(2012)e1 Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing
  • D4602 – 93(2015) Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment
  • D4603 – 03(2011)e1 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer
  • D4603-POR – 03(2011)e1 Método de teste padrão para Determinar a Viscosidade Inerente do Poli (Etileno Tereftalato) (PET) através do Viscosímetro Capilar de Vidro
  • D4603-RUS – 03(2011)e1 Стандартный метод определения характеристической вязкости полиэтилентерефталата (ПЭТ) с помощью стеклянного капиллярного вискозиметра
  • D4606 – 15 Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method
  • D4607 – 14 Standard Test Method for Determination of Iodine Number of Activated Carbon
  • D4608 – 89(2017) Standard Test Method for Citrate in Detergents
  • D4610 – 98(2017) Standard Guide for Determining the Presence of and Removing Microbial (Fungal or Algal) Growth on Paint and Related Coatings
  • D4611 – 16 Standard Test Method for Specific Heat of Rock and Soil
  • D4612 – 16 Standard Test Method for Calculating Thermal Diffusivity of Rock and Soil
  • D4614 – 11 Standard Specification for Ethyl Acetate (All Grades)
  • D4615 – 12 Standard Specification for n-Butyl Acetate (All Grades)
  • D4616 – 95(2013) Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
  • D4618 – 92(2017) Standard Specification for Design and Fabrication of Flue Gas Desulfurization System Components for Protective Lining Application
  • D4619 – 12 Standard Practice for Inspection of Linings in Operating Flue Gas Desulfurization Systems
  • D4620 – 02(2017) Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber
  • D4623 – 16 Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—Three Component Borehole Deformation Gauge
  • D4625 – 16 Standard Test Method for Middle Distillate Fuel Storage Stability at 43 °C (110 °F)
  • D4626 – 95(2015) Standard Practice for Calculation of Gas Chromatographic Response Factors
  • D4626-RUS – 95(2015) Стандартная методика расчета коэффициентов чувствительности в газовой хроматографии
  • D4627 – 12(2017) Standard Test Method for Iron Chip Corrosion for Water–Miscible Metalworking Fluids
  • D4628 – 16 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry
  • D4628-RUS – 16 СТАНДАРТНЫЙ МЕТОД ИСПЫТАНИЙ ДЛЯ АНАЛИЗА СОДЕРЖАНИЯ БАРИЯ, КАЛЬЦИЯ, МАГНИЯ И ЦИНКА В НЕИСПОЛЬЗОВАННЫХ СМАЗОЧНЫХ МАСЛАХ МЕТОДОМ АТОМНОЙ АБСОРБЦИОННОЙ СПЕКТРОМЕТРИИ
  • D4629 – 12(2017) Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
  • D4629-RUS – 12(2017) СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ СЛЕДОВ АЗОТА В ЖИДКИХ УГЛЕВОДОРОДАХ НЕФТИ ПРИ ОКИСЛИТЕЛЬНОМ СГОРАНИИ ПРОБЫ, ВВЕДЕННОЙ ШПРИЦЕМ ИЛИ ЛОДОЧКОЙ, И ХЕМИЛЮМИНИСЦЕНТНОМ ОБНАРУЖЕНИИ
  • D4629-SP – 12(2017) Método de prueba estándar para detección de trazas de nitrógeno en hidrocarburos de petróleo líquido mediante combustión oxidativa con introducción por jeringa y quimioluminiscencia
  • D4632/D4632M – 15a Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
  • D4633 – 16 Standard Test Method for Energy Measurement for Dynamic Penetrometers
  • D4634 – 16 Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)
  • D4635 – 16 Standard Specification for Plastic Films Made from Low-Density Polyethylene and Linear Low-Density Polyethylene for General Use and Packaging Applications
  • D4636 – 17 Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils
  • D4637/D4637M – 15 Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane
  • D4638 – 16 Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis
  • D4640 – 86(2017) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
  • D4641 – 17 Standard Practice for Calculation of Pore Size Distributions of Catalysts and Catalyst Carriers from Nitrogen Desorption Isotherms
  • D4642 – 04(2016) Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry
  • D4642-RUS – 04(2016) СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ ПЛАТИНЫ В КАТАЛИЗАТОРАХ ДЛЯ РЕФОРМИНГА С ПОМОЩЬЮ ЖИДКОСТНОЙ ХИМИЧЕСКОЙ ОБРАБОТКИ
  • D4643 – 17 Standard Test Method for Determination of Water Content of Soil and Rock by Microwave Oven Heating
  • D4644 – 16 Standard Test Method for Slake Durability of Shales and Other Similar Weak Rocks
  • D4646 – 16 Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments
  • D4647/D4647M – 13 Standard Test Methods for Identification and Classification of Dispersive Clay Soils by the Pinhole Test
  • D4648/D4648M – 16 Standard Test Methods for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil
  • D4649 – 03(2016) Standard Guide for Selection and Use of Stretch Wrap Films
  • D4650 – 14 Standard Specification for Normal Butane Thermophysical Property Tables
  • D4651 – 14 Standard Specification for Isobutane Thermophysical Property Tables
  • D4652 – 05(2012) Standard Specification for Silicone Fluid Used for Electrical Insulation
  • D4653 – 87(2015) Standard Test Method for Total Chlorides in Leather
  • D4654 – 87(2015) Standard Test Method for Sulfate Basicity in Leather
  • D4655 – 95(2017) Standard Test Methods for Sulfates in Leather (Total, Neutral, and Combined Acid)
  • D4658 – 15 Standard Test Method for Sulfide Ion in Water
  • D4658-RUS – 15 Стандартный метод определения содержания ионов сульфидов в воде
  • D4659 – 14 Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates
  • D4660 – 12 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate
  • D4661 – 13 Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates
  • D4662 – 15 Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols
  • D4663 – 15 Standard Test Method for Polyurethane Raw Materials: Determination of Hydrolyzable Chlorine of Isocyanates
  • D4669 – 07(2013)e1 Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols
  • D4670 – 17 Standard Test Method for Polyurethane Raw Materials: Determination of Suspended Matter in Polyols
  • D4671 – 16 Standard Test Method for Polyurethane Raw Materials: Determination of Unsaturation of Polyols
  • D4672 – 12 Standard Test Method for Polyurethane Raw Materials: Determination of Water Content of Polyols
  • D4672-RUS – 12 Стандартный метод испытаний полиуретанового сырья: определение содержания воды в полиолах
  • D4673 – 16 Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials
  • D4674 – 02a(2010) Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments
  • D4675 – 14a Standard Guide for Selection and Use of Flat Strapping Materials1
  • D4676 – 94(2017) Standard Classification for Rubber Compounding Materials—Antidegradants
  • D4677 – 87(2013) Standard Classification for Rubber Compounding Materials—Titanium Dioxide
  • D4678 – 15a Standard Practice for Rubber—Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
  • D4679 – 02(2015)e1 Standard Specification for Rubber General Purpose, Household or Beautician Gloves
  • D4680 – 98(2017) Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
  • D4682 – 13 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants
  • D4683 – 17 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C
  • D4683-RUS – 17 СТАНДАРТНЫЙ МЕТОД ИЗМЕРЕНИЯ ВЯЗКОСТИ НОВЫХ И ОТРАБОТАННЫХ МОТОРНЫХ МАСЕЛ ПРИ ВЫСОКОЙ СКОРОСТИ СДВИГА И ВЫСОКОЙ ТЕМПЕРАТУРЕ С ПОМОЩЬЮ ВИСКОЗИМЕТРА С ИМИТАЦИЕЙ КОНИЧЕСКОГО ПОДШИПНИКА ПРИ 150°C
  • D4684 – 17a Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
  • D4685/D4685M – 15 Standard Test Method for Pile Fabric Abrasion
  • D4687 – 14 Standard Guide for General Planning of Waste Sampling
  • D4688/D4688M – 14 Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber
  • D4689 – 12 Standard Specification for Adhesive, Casein-Type
  • D4690 – 12 Standard Specification for Urea-Formaldehyde Resin Adhesives
  • D4691 – 17 Standard Practice for Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry
  • D4692 – 01(2017) Standard Practice for Calculation and Adjustment of Sulfate Scaling Salts (CaSO4, SrSO4, and BaSO4) for Reverse Osmosis and Nanofiltration
  • D4693 – 07(2017) Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
  • D4694 – 09(2015) Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device
  • D4695 – 03(2015) Standard Guide for General Pavement Deflection Measurements
  • D4698 – 92(2013) Standard Practice for Total Digestion of Sediment Samples for Chemical Analysis of Various Metals
  • D4699 – 03(2013) Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
  • D4700 – 15 Standard Guide for Soil Sampling from the Vadose Zone
  • D4701 – 00(2015) Standard Specification for Technical Grade Methylene Chloride
  • D4703 – 16 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
  • D4704 – 13(2017) Standard Test Method for Tearing Strength, Tongue Tear of Leather
  • D4705 – 13 Standard Test Method for Stitch Tear Strength of Leather, Double Hole
  • D4707 – 09(2017) Standard Test Method for Measuring Paint Spatter Resistance During Roller Application
  • D4708 – 12 Standard Practice for Preparation of Uniform Free Films of Organic Coatings
  • D4709 – 07(2012) Standard Specification for Methyl Acrylate
  • D4710 – 07(2012) Standard Specification for Acetaldehyde
  • D4711 – 89(2017) Standard Test Method for Sulfonic and Sulfuric Acids in Alkylbenzene Sulfonic Acids
  • D4713 – 12 Standard Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems
  • D4715 – 98(2017) Standard Test Method for Coking Value of Tar and Pitch (Alcan)
  • D4716/D4716M – 14 Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
  • D4718/D4718M – 15 Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
  • D4720 – 08(2013) Standard Performance Specification for Soft Window Covering Fabrics for Household Use
  • D4721 – 12 Standard Practice for Evaluation of the Performance of Machine Washable and Drycleanable Bedcoverings and Accessories
  • D4724 – 11 Standard Test Method for Entanglements in Untwisted Filament Yarns by Needle Insertion
  • D4725 – 15 Standard Terminology for Engine Coolants and Related Fluids
  • D4726 – 15 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors
  • D4727/D4727M – 17 Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes
  • D4728 – 17 Standard Test Method for Random Vibration Testing of Shipping Containers
  • D4730 – 13 Standard Specification for Flooding Compounds for Telecommunications Wire and Cable
  • D4731 – 13 Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable
  • D4732 – 13 Standard Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable
  • D4733 – 17 Standard Test Methods for Solventless Electrical Insulating Varnishes
  • D4734 – 17 Standard Specification for Refined Benzene-545
  • D4735 – 15 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography
  • D4735-RUS – 15 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ СЛЕДОВ ТИОФЕНА В ОЧИЩЕННОМ БЕНЗОЛЕ С ПОМОЩЬЮ ГАЗОВОЙ ХРОМАТОГРАФИИ
  • D4737 – 10(2016) Standard Test Method for Calculated Cetane Index by Four Variable Equation
  • D4737-RUS – 10(2016) Стандартный метод определения расчетного цетанового индекса по уравнению с четырьмя переменными
  • D4739 – 11(2017) Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
  • D4740 – 04(2014) Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test
  • D4740-RUS – 04(2014) Стандартный метод определения чистоты и совместимости нефтяных топлив с помощью испытания методом пятна
  • D4740-SP – 04(2014) Método de prueba estándar para limpieza y compatibilidad de combustibles residuales mediante prueba de manchas
  • D4741 – 17 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
  • D4742 – 17 Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)
  • D4745 – 14 Standard Classification System and Basis for Specification for Filled Polytetrafluoroethlyene (PTFE) Molding and Extrusion Materials Using ASTM Methods
  • D4746 – 14e1 Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration
  • D4747 – 02(2014) Standard Test Method for Determining Unreacted Monomer Content of Latexes Using Gas-Liquid Chromatography
  • D4748 – 10(2015) Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar
  • D4749 – 87(2012) Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
  • D4749-RUS – 87(2012) Стандартный метод гранулометрического анализа угля и система обозначений размеров гранул угля
  • D4751 – 16 Standard Test Methods for Determining Apparent Opening Size of a Geotextile
  • D4752 – 10(2015) Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub
  • D4753 – 15 Standard Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing
  • D4754 – 11 Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell
  • D4755 – 95(2015)e1 Standard Test Method for Free Halogens in Halogenated Organic Solvents and Their Admixtures
  • D4756 – 15 Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit
  • D4759 – 11 Standard Practice for Determining the Specification Conformance of Geosynthetics
  • D4761 – 13 Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material
  • D4762 – 16 Standard Guide for Testing Polymer Matrix Composite Materials
  • D4763 – 06(2012) Standard Practice for Identification of Chemicals in Water by Fluorescence Spectroscopy
  • D4764 – 01(2016) Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint
  • D4765 – 13 Standard Test Method for Measurement of Fluorides in Workplace Atmospheres by Ion-Selective Electrodes
  • D4766 – 98(2014) Standard Test Method for Vinyl Chloride in Workplace Atmospheres (Charcoal Tube Method)
  • D4767 – 11 Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
  • D4767-RUS – 11 Стандартный метод консолидированных испытаний связных грунтов на трехосное сжатие без дренирования
  • D4768 – 11 Standard Test Method for Analysis of 2,6-Ditertiary-Butyl Para-Cresol and 2,6-Ditertiary-Butyl Phenol in Insulating Liquids by Gas Chromatography
  • D4769 – 12 Standard Specification for Woven and Warp Knitted Comforter Fabrics
  • D4772 – 14 Standard Test Method for Surface Water Absorption of Terry Fabrics (Water Flow)
  • D4773 – 02(2012) Standard Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate
  • D4774 – 11e1 Standard Specification for User Applied Drug Labels in Anesthesiology
  • D4775/D4775M – 09(2014) Standard Specification for Identification and Configuration of Prefilled Syringes and Delivery Systems for Drugs (Excluding Pharmacy Bulk Packages)
  • D4776/D4776M – 10 Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure
  • D4776/D4776M-RUS – 10 Стандартное определение сцепления шинных кордов и других армирующих кордов с резиновыми смесями методом H-теста
  • D4778 – 15 Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions
  • D4780 – 12(2017)e1 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption
  • D4781 – 03(2013) Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
  • D4781-RUS – 03(2013) Стандартный метод определения насыпной плотности тонкодисперсных частиц катализатора и частиц носителя катализатора путем уплотнения механическим обстукиванием
  • D4782 – 10(2016) Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry
  • D4783 – 01(2013) Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi
  • D4784 – 93(2015) Standard Specification for LNG Density Calculation Models
  • D4785 – 08(2013)e1 Standard Test Method for Low-Level Analysis of Iodine Radioisotopes in Water
  • D4786 – 00(2016) Standard Test Method for Stitch Tear Strength, Single Hole
  • D4787 – 13 Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates
  • D4788 – 03(2013) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
  • D4789 – 12 Standard Test Method for Solution Color of Bisphenol A (4,4`-Isopropylidenediphenol)
  • D4789-RUS – 12 Стандартный метод определения цвета раствора бисфенола A (4,4′-изопропилидендифенола)
  • D4790 – 14 Standard Terminology of Aromatic Hydrocarbons and Related Chemicals
  • D4791 – 10 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
  • D4792/D4792M – 13 Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions
  • D4793 – 09(2017) Standard Test Method for Sequential Batch Extraction of Waste with Water
  • D4794 – 94(2017) Standard Test Method for Determination of Ethoxyl or Hydroxyethoxyl Substitution in Cellulose Ether Products by Gas Chromatography
  • D4796 – 17 Standard Test Method for Bond Strength of Thermoplastic Pavement Marking Materials
  • D4797 – 12a Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking
  • D4798/D4798M – 11(2016) Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
  • D4799/D4799M – 17 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
  • D4800 – 94(2015) Standard Guide for Classifying and Specifying Adhesives
  • D4801 – 08(2016) Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater
  • D4802 – 16 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
  • D4803 – 10 Standard Test Method for Predicting Heat Buildup in PVC Building Products
  • D4804 – 14 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
  • D4806 – 17 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
  • D4807 – 05(2015) Standard Test Method for Sediment in Crude Oil by Membrane Filtration
  • D4808 – 17 Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy
  • D4809 – 13 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
  • D4810 – 06(2015) Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
  • D4811/D4811M – 16 Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing
  • D4812 – 11 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics
  • D4814 – 17 Standard Specification for Automotive Spark-Ignition Engine Fuel
  • D4815 – 15b Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography
  • D4815-SP – 15b Método de prueba estándar paradeterminación de éter metil-terbutílico (MTBE), éter etil-terbutílico (ETBE), éter metilteramílico(TAME), éter diisopropílico (DIPE), alcohol amílico terciario y alcoholes C1 aC4 en gasolina por medio de cromatografía de gases
  • D4817 – 88(2017) Standard Classification for Rubber Compounding Materials—Stearic Acid
  • D4818 – 89(2017) Standard Classification for Rubber Compounding Materials—Vulcanization Accelerators
  • D4819 – 13 Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics
  • D4821 – 16 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
  • D4822 – 88(2014) Standard Guide for Selection of Methods of Particle Size Analysis of Fluvial Sediments (Manual Methods)
  • D4823 – 95(2014) Standard Guide for Core Sampling Submerged, Unconsolidated Sediments
  • D4824 – 13 Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption
  • D4827 – 03(2015) Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography
  • D4828 – 94(2016) Standard Test Methods for Practical Washability of Organic Coatings
  • D4829 – 11 Standard Test Method for Expansion Index of Soils
  • D4830/D4830M – 98(2014)e1 Standard Test Methods for Characterizing Thermoplastic Fabrics Used in Roofing and Waterproofing
  • D4831 – 00(2016) Standard Test Method for Buckle Tear Strength of Leather
  • D4832 – 16 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
  • D4833/D4833M – 07(2013)e1 Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products
  • D4834 – 03(2014) Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy
  • D4835 – 08(2012) Standard Specification for Propylene Glycol Monomethyl Ether Acetate
  • D4836 – 09(2017) Standard Specification for Dipropylene Glycol Monomethyl Ether
  • D4837 – 07(2012) Standard Specification for Propylene Glycol Monomethyl Ether
  • D4838 – 88(2016) Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints
  • D4839 – 03(2017) Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
  • D4840 – 99(2010) Standard Guide for Sampling Chain-of-Custody Procedures
  • D4841 – 88(2013)e1 Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents
  • D4843 – 88(2016) Standard Test Method for Wetting and Drying Test of Solid Wastes
  • D4844 – 16 Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection
  • D4845 – 10e2 Standard Terminology Relating to Wool
  • D4846 – 96(2016) Standard Test Method for Resistance to Unsnapping of Snap Fasteners
  • D4848 – 98(2012) Standard Terminology Related to Force, Deformation and Related Properties of Textiles
  • D4848-RUS – 98(2012) Стандартная терминология, относящаяся к прочностным, деформационным и прочим свойствам текстильных материалов
  • D4849 – 13e3 Standard Terminology Related to Yarns and Fibers
  • D4850 – 13(2017) Standard Terminology Relating to Fabrics and Fabric Test Methods
  • D4851 – 07(2015) Standard Test Methods for Coated and Laminated Fabrics for Architectural Use
  • D4856 – 11(2016) Standard Test Method for Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatographic Analysis)
  • D4857 – 12 Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards
  • D4858 – 13 Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines
  • D4859 – 13 Standard Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC
  • D4860 – 14 Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)
  • D4861 – 11 Standard Practice for Sampling and Selection of Analytical Techniques for Pesticides and Polychlorinated Biphenyls in Air
  • D4863 – 13 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants
  • D4865 – 09(2014) Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
  • D4866/D4866M – 88(2017) Standard Performance Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations Containing Mineral Aggregates and Optional Polymeric Admixtures
  • D4867/D4867M – 09(2014) Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures
  • D4868 – 17 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Hydrocarbon Burner and Diesel Fuels
  • D4868-RUS – 17 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ НИЗШЕЙ И ВЫСШЕЙ ТЕПЛОТЫ СГОРАНИЯ УГЛЕВОДОРОДНЫХ ТОПОЧНЫХ МАЗУТОВ И ДИЗЕЛЬНЫХ ТОПЛИВСТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ НИЗШЕЙ И ВЫСШЕЙ ТЕПЛОТЫ СГОРАНИЯ УГЛЕВОДОРОДНЫХ ТОПОЧНЫХ МАЗУТОВ И ДИЗЕЛЬНЫХ ТОПЛИВ
  • D4869/D4869M – 16a Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing
  • D4870 – 09(2014) Standard Test Method for Determination of Total Sediment in Residual Fuels
  • D4870-RUS – 09(2014) Стандартный метод определения общего количества осадка в остаточных топливах
  • D4871 – 11(2016) Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus
  • D4872 – 14 Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds
  • D4873/D4873M – 17 Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples
  • D4874 – 95(2014) Standard Test Method for Leaching Solid Material in a Column Apparatus
  • D4875 – 11 Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols
  • D4877 – 14 Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates
  • D4878 – 15 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols
  • D4880 – 14 Standard Test Method for Salt Water Proofness of Insulating Varnishes Over Enamelled Magnet Wire
  • D4881 – 05(2017) Standard Test Method for Thermal Endurance of Varnished Fibrous- or Film-Wrapped Magnet Wire
  • D4882 – 17 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
  • D4884/D4884M – 14a Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles
  • D4885 – 01(2011) Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
  • D4886 – 10(2016) Standard Test Method for Abrasion Resistance of Geotextiles (Sand Paper/Sliding Block Method)
  • D4887/D4887M – 11(2016) Standard Practice for Preparation of Viscosity Blends for Hot Recycled Asphalt Materials
  • D4888 – 06(2015) Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes
  • D4889 – 15 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates
  • D4890 – 13 Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols
  • D4891 – 13 Standard Test Method for Heating Value of Gases in Natural Gas and Flare Gases Range by Stoichiometric Combustion
  • D4892 – 14 Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
  • D4893 – 94(2015)e1 Standard Test Method for Determination of Pitch Volatility
  • D4894 – 15 Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials
  • D4895 – 16 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
  • D4896 – 01(2016) Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results
  • D4897/D4897M – 16 Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing
  • D4898 – 16 Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
  • D4899 – 99(2016) Standard Practice for Analysis of Vegetable Tanning Materials—General
  • D4900 – 99(2016) Standard Test Method for Lignosulfonates (Sulfite Cellulose) in Tanning Extracts
  • D4901 – 99(2016) Standard Practice for Preparation of Solution of Liquid Vegetable Tannin Extracts
  • D4902 – 99(2016) Standard Test Method for Evaporation and Drying of Analytical Solutions
  • D4903 – 99(2016) Standard Test Method for Total Solids and Water in Vegetable Tanning Material Extracts
  • D4904 – 99(2016) Standard Practice for Cooling of Analytical Solutions
  • D4905 – 99(2016) Standard Practice for Preparation of Solution of Solid, Pasty and Powdered Vegetable Tannin Extracts
  • D4906 – 95(2017) Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials
  • D4907 – 10(2015) Standard Test Method for Nitrocellulose in Finish on Leather
  • D4910/D4910M – 08(2013) Standard Tables of Body Measurements for Children, Infant Sizes—Preemie to 24 Months
  • D4912/D4912M – 14 Standard Test Method for Fabric Stability of Vinyl-Coated Glass Yarn Insect Screening and Louver Cloth
  • D4913 – 00(2016) Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors
  • D4913-ARA – 00(2016) Стандартная методика определения концентрации сероводорода с помощью химических детекторов с прямым визуальным отсчетом длины области измененного цвета
  • D4913-RUS – 00(2016) Стандартная методика определения концентрации сероводорода с помощью химических детекторов с прямым визуальным отсчетом длины области измененного цвета
  • D4914/D4914M – 16 Standard Test Methods for Density of Soil and Rock in Place by the Sand Replacement Method in a Test Pit
  • D4919 – 17 Standard Guide for Testing of Hazardous Materials (Dangerous Goods) Packagings
  • D4920 – 13 Standard Terminology Relating to Conditioning, Chemical, and Thermal Properties
  • D4921 – 95(2012) Standard Test Method for Foaming Tendencies of Engine Coolants at Room Temperature
  • D4922 – 09(2016)e1 Standard Test Method for Determination of Radioactive Iron in Water
  • D4924 – 89(2017) Standard Classification for Petroleum Waxes for Use in Rubber Compounding
  • D4926 – 15 Standard Test Method for Gamma Alumina Content in Catalysts and Catalyst Carriers Containing Silica and Alumina by X-ray Powder Diffraction
  • D4927 – 15 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
  • D4928 – 12 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration
  • D4928-RUS – 12 Стандартный метод определения содержания воды в сырой нефти посредством кулонометрического титрования по методу Карла Фишера
  • D4929 – 17 Standard Test Method for Determination of Organic Chloride Content in Crude Oil
  • D4930 – 06(2017) Standard Test Method for Dust Control Material on Calcined Petroleum Coke
  • D4931 – 06(2017) Standard Test Method for Gross Moisture in Green Petroleum Coke
  • D4932/D4932M – 89(2014)e1 Standard Test Method for Fastener Rupture and Tear Resistance of Roofing and Waterproofing Sheets, Roll Roofing, and Shingles
  • D4933 – 16 Standard Guide for Moisture Conditioning of Wood and Wood-Based Materials
  • D4934 – 02(2017) Standard Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide Accelerators—Insolubles
  • D4935 – 10 Standard Test Method for Measuring the Electromagnetic Shielding Effectiveness of Planar Materials
  • D4936 – 10(2015) Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/Titration
  • D4936-RUS – 10(2015) Стандартный метод испытаний для количественного анализа сульфенамида меркаптобензотиазола восстановлением/ титрированием
  • D4937 – 96(2017) Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography
  • D4938 – 89(2013) Standard Test Method for Erosion Testing of Antifouling Paints Using High Velocity Water
  • D4939 – 89(2013) Standard Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater
  • D4940 – 15e1 Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blast Cleaning Abrasives
  • D4941 – 06(2016) Standard Practice for Preparing Drawdowns of Artists’ Paste Paints
  • D4942 – 11 Standard Test Methods for Water Pickup of Lithographic Printing Inks and Vehicles in a Laboratory Mixer
  • D4944 – 11 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
  • D4945 – 17 Standard Test Method for High-Strain Dynamic Testing of Deep Foundations
  • D4946 – 89(2017) Standard Test Method for Blocking Resistance of Architectural Paints
  • D4948 – 89(2016) Standard Test Method for Determination of the Upper Layer Separated from a Viscous Liquid
  • D4950 – 14 Standard Classification and Specification for Automotive Service Greases
  • D4951 – 14 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
  • D4951-RUS – 14 Стандартный метод испытаний для определения содержания присадок в смазочных маслах с помощью атомно-эмиссионной спектрометрии с индуктивно-связанной плазмой
  • D4952 – 12(2017) Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
  • D4952-RUS – 12(2017) СТАНДАРТНЫЙ МЕТОД КАЧЕСТВЕННОГО АНАЛИЗА АКТИВНОЙ СЕРЫ В ТОПЛИВЕ И РАСТВОРИТЕЛЯХ (ДОКТОРСКАЯ ПРОБА)
  • D4953 – 15 Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
  • D4953-RUS – 15 Стандартный метод определения давления насыщенных паров бензина и бензин-оксигенатных смесей (сухой метод)
  • D4954 – 89(2017) Standard Test Method for Determination of Nitrilotriacetates in Detergents
  • D4955 – 89(2016) Standard Practice for Field Evaluation of Automotive Polish
  • D4956 – 17 Standard Specification for Retroreflective Sheeting for Traffic Control
  • D4957 – 18 Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Asphalts by Vacuum Capillary Viscometer
  • D4958 – 10(2016) Standard Test Method for Comparison of the Brush Drag of Latex Paints
  • D4959 – 16 Standard Test Method for Determination of Water Content of Soil By Direct Heating
  • D4960 – 08(2013) Standard Test Method for Evaluation of Color for Thermoplastic Traffic Marking Materials
  • D4962 – 17 Standard Practice for NaI(Tl) Gamma-Ray Spectrometry of Water
  • D4963/D4963M – 11 Standard Test Method for Ignition Loss of Glass Strands and Fabrics
  • D4964 – 96(2016) Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
  • D4966 – 12(2016) Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)
  • D4967 – 99(2013) Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing and Strength Components in Fiber-Optic Cables
  • D4968 – 17 Standard Practice for Annual Review of Test Methods and Specifications for Plastics
  • D4969 – 17 Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric
  • D4970/D4970M – 16e3 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Martindale Tester
  • D4971 – 16 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using Diametrically Loaded 76-mm (3-in.) Borehole Jack
  • D4972 – 13 Standard Test Method for pH of Soils
  • D4974 – 04(2016) Standard Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
  • D4974-RUS – 04(2016) Стандартный метод измерения термической усадки пряжи и корда в термоусадочной печи с помощью горячего воздуха
  • D4975 – 14 Standard Test Methods for Single-Filament Tire Bead Wire Made from Steel
  • D4975-RUS – 14 Стандартные методы испытаний стальной однонитевой бортовой проволоки шины
  • D4976 – 12a Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
  • D4977/D4977M – 03(2013)e1 Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion
  • D4978 – 16 Standard Test Methods for Screening of Reactive Sulfides in Waste
  • D4979 – 12 Standard Test Method for Physical Description Screening Analysis in Waste
  • D4981 – 12 Standard Test Method for Screening of Oxidizers in Waste
  • D4982 – 12 Standard Test Methods for Flammability Potential Screening Analysis of Waste
  • D4984 – 06(2015) Standard Test Method for Carbon Dioxide in Natural Gas Using Length-of-Stain Detector Tubes
  • D4985 – 10(2015) Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
  • D4986 – 10 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials
  • D4989/D4989M – 90a(2014)e1 Standard Test Method for Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer
  • D4990 – 97a(2013) Standard Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing
  • D4991 – 07(2015) Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method
  • D4992 – 14e1 Standard Practice for Evaluation of Rock to be Used for Erosion Control
  • D4993 – 08(2014) Standard Practice for Calculation and Adjustment of Silica (SiO2) Scaling for Reverse Osmosis
  • D4994 – 89(2014) Standard Practice for Recovery of Viruses from Wastewater Sludges
  • D4995 – 10(2015) Standard Specification for Electronic and Degreasing Grades of 1,1,2–Trichloro 1,2,2,–Trifluoroethane Solvent
  • D4998 – 13 Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids
  • D4998-RUS – 13 СТАНДАРТНЫЙ МЕТОД ОЦЕНКИ ХАРАКТЕРИСТИК ИЗНОСА ГИДРАВЛИЧЕСКИХ ЖИДКОСТЕЙ ДЛЯ ТРАКТОРОВ
  • D5001 – 10(2014) Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
  • D5002 – 16 Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
  • D5002-RUS – 16 Стандартный метод определения плотности и относительной плотности сырой нефти с помощью цифрового анализатора плотности
  • D5003 – 06a(2017) Standard Test Method for Hardgrove Grindability Index (HGI) of Petroleum Coke
  • D5004 – 11(2017) Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
  • D5006 – 11(2016) Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
  • D5007 – 99(2017) Standard Test Method for Wet-to-Dry Hiding Change
  • D5008 – 07(2012) Standard Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas Chromatography
  • D5008-RUS – 07(2012) СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ СОДЕРЖАНИЯ ЭТИЛМЕТИЛПЕНТАНОЛА И СТЕПЕНИ ЧИСТОТЫ2-ЭТИЛГЕКСАНОЛА С ПОМОЩЬЮ ГАЗОВОЙ ХРОМАТОГРАФИИ
  • D5009 – 02(2017) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
  • D5011 – 17 Standard Practices for Calibration of Ozone Monitors Using Transfer Standards
  • D5012 – 01(2013) Standard Guide for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition
  • D5013 – 16 Standard Practices for Sampling Wastes from Pipes and Other Point Discharges
  • D5015 – 15 Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
  • D5016 – 16 Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption
  • D5017 – 17 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance
  • D5018 – 89(2015)e1 Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches
  • D5023 – 15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
  • D5024 – 15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression
  • D5025 – 12e1 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
  • D5026 – 15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension
  • D5028 – 17 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
  • D5029 – 98(2014) Standard Test Method for Water Solubles in Activated Carbon
  • D5030/D5030M – 13a Standard Test Methods for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit
  • D5031/D5031M – 13 Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings
  • D5032 – 11 Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions
  • D5034 – 09(2017) Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
  • D5035 – 11(2015) Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)
  • D5035-RUS – 11(2015) Стандартный метод определения прочности на разрыв и относительного удлинения текстильных тканей (испытание на разрыв полоски ткани путем ее зажима по всей ширине)
  • D5040 – 90(2016) Standard Test Methods for Ash Content of Adhesives
  • D5041 – 98(2012) Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints
  • D5042 – 90(2009) Standard Test Method for Estimating the Organic Fouling of Particulate Anion Exchange Resins
  • D5044 – 06(2017) Standard Test Method for Rubber Compounding Materials—Free 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide (MBTS)
  • D5045 – 14 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials
  • D5047 – 17 Standard Specification for Polyethylene Terephthalate Film and Sheeting
  • D5048 – 14 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
  • D5050 – 08(2015) Standard Guide for Commercial Use of Lime Kiln Dusts and Portland Cement Kiln Dusts
  • D5051 – 06(2017) Standard Test Method for Rubber Compounding Materials—Benzothiazyl Disulfide (MBTS)—Assay
  • D5052 – 00(2010) Standard Test Method for Permeability of Leather to Water Vapor
  • D5053 – 03(2015) Standard Test Method for Colorfastness of Crocking of Leather
  • D5054 – 90(2014) Standard Test Method for Rubber Chemicals—Diphenyl Guanidine (DPG) and Di-o-tolyl-guanidine (DOTG) Assay
  • D5055 – 16 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
  • D5056 – 17 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
  • D5057 – 17 Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
  • D5058 – 12 Standard Practices for Compatibility of Screening Analysis of Waste
  • D5059 – 14 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy
  • D5060 – 12 Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography
  • D5060-RUS – 12 Стандартный метод определения содержания примесей в высокочистом этилбензоле с помощью газовой хроматографии
  • D5061 – 16 Standard Test Method for Microscopical Determination of the Textural Components of Metallurgical Coke
  • D5062 – 09(2017) Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
  • D5063 – 90(2012) Standard Guide for Use of Certification of Coating Conformance Form
  • D5064 – 16a Standard Practice for Conducting a Patch Test to Assess Coating Compatibility
  • D5065 – 17 Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces
  • D5066 – 91(2017) Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints—Weight Basis
  • D5067 – 16 Standard Specification for Artists’ Watercolor Paints
  • D5068 – 04(2013) Standard Practice for Preparation of Paint Brushes for Evaluation
  • D5069/D5069M – 13 Standard Practice for Preparation of Paint-Roller Covers for Evaluation of Architectural Coatings
  • D5070 – 90(2014) Standard Test Method for Synthetic Quaternary Ammonium Salts in Fabric Softeners by Potentiometric Titrations
  • D5071 – 06(2013) Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus
  • D5072 – 09(2016) Standard Test Method for Radon in Drinking Water
  • D5073 – 02(2013) Standard Practice for Depth Measurement of Surface Water
  • D5074 – 90(2014) Standard Practice for Preparation of Natural-Matrix Sediment Reference Samples for Major and Trace Inorganic Constituents Analysis by Partial Extraction Procedures
  • D5075 – 01(2017)e1 Standard Test Method for Nicotine and 3-Ethenylpyridine in Indoor Air
  • D5076/D5076M – 13 Standard Test Method for Measuring Voids in Roofing and Waterproofing Membranes
  • D5077 – 90(2015) Standard Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials
  • D5078/D5078M – 11(2016) Standard Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements
  • D5080 – 17 Standard Test Method for Rapid Determination of Percent Compaction
  • D5081/D5081M – 90(2011)e1 Standard Test Method for Aggregate Layer Hiding Power
  • D5083 – 17 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
  • D5084 – 16a Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
  • D5085 – 02(2013) Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography
  • D5086 – 01(2013) Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry
  • D5087 – 02(2014) Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
  • D5088 – 15a Standard Practice for Decontamination of Field Equipment Used at Waste Sites
  • D5089 – 95(2014) Standard Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters
  • D5091 – 95(2014) Standard Guide for Water Analysis for Electrodialysis/Electrodialysis Reversal Applications
  • D5092/D5092M – 16 Standard Practice for Design and Installation of Groundwater Monitoring Wells
  • D5093 – 15 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
  • D5094/D5094M – 09(2014) Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures
  • D5095 – 91(2013) Standard Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments
  • D5096 – 02(2017) Standard Test Method for Determining the Performance of a Cup Anemometer or Propeller Anemometer
  • D5098 – 16 Standard Specification for Artists’ Acrylic Dispersion Paints
  • D5099 – 08(2017) Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry
  • D5100/D5100M – 95a(2010)e1 Standard Test Method for Adhesion of Mineral Aggregate to Hot Bitumen
  • D5101 – 12(2017) Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems
  • D5102 – 09 Standard Test Method for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures
  • D5103 – 07(2012) Standard Test Method for Length and Length Distribution of Manufactured Staple Fibers (Single-Fiber Test)
  • D5105 – 05(2011) Standard Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight
  • D5106 – 15 Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures
  • D5107 – 03(2013) Standard Practice for Preparatory Surface Cleaning of Architectural Sandstone
  • D5109 – 12 Standard Test Methods for Copper-Clad Thermosetting Laminates for Printed Wiring Boards
  • D5110 – 98(2017) Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
  • D5111 – 12 Standard Guide for Choosing Locations and Sampling Methods to Monitor Atmospheric Deposition at Non-Urban Locations
  • D5112 – 98(2015) Standard Test Method for Vibration (Horizontal Linear Motion) Test of Products
  • D5113 – 97(2016) Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam
  • D5114 – 90(2010) Standard Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell
  • D5116 – 17 Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions from Indoor Materials/Products
  • D5117 – 17 Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock
  • D5118/D5118M – 15 Standard Practice for Fabrication of Fiberboard Shipping Boxes
  • D5121 – 15 Standard Practice for Preparation of Rock Slabs for Durability Testing
  • D5124 – 96(2013) Standard Practice for Testing and Use of a Random Number Generator in Lumber and Wood Products Simulation
  • D5125 – 10(2014) Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
  • D5126 – 16e1 Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone
  • D5127 – 13 Standard Guide for Ultra-Pure Water Used in the Electronics and Semiconductor Industries
  • D5127-RUS – 13 Стандартное руководство по сверхчистой воде, используемой в радиоэлектронной и полупроводниковой промышленности
  • D5128 – 14 Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
  • D5129 – 95(2014)e1 Standard Test Method for Open Channel Flow Measurement of Water Indirectly by Using Width Contractions
  • D5130 – 95(2014) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
  • D5131 – 90(2014) Standard Guide for Record Keeping for Electrodialysis/Electrodialysis Reversal Systems
  • D5132 – 17 Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles
  • D5133 – 15 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
  • D5134 – 13(2017) Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography
  • D5135 – 16e1 Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography
  • D5135-RUS – 16e1 СТАНДАРТНЫЙ МЕТОД АНАЛИЗА СТИРОЛА С ПОМОЩЬЮ КАПИЛЛЯРНОЙ ГАЗОВОЙ ХРОМАТОГРАФИИ
  • D5136 – 17a Standard Specification for High Purity p-Xylene
  • D5137 – 07(2013) Standard Specification for Hexyl Acetate
  • D5138 – 16 Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)
  • D5139 – 12 Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
  • D5141 – 11 Standard Test Method for Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device
  • D5143 – 06(2015)e1 Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography
  • D5144 – 08(2016) Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants
  • D5145 – 09(2014) Standard Test Methods for Nonvolatile and Pigment Content of Electrocoat Baths
  • D5146 – 10 Standard Guide to Testing Solvent-Borne Architectural Coatings
  • D5147/D5147M – 14 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
  • D5148 – 10 Standard Test Method for Centrifuge Kerosine Equivalent
  • D5149 – 02(2016) Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence
  • D5150 – 92(2017) Standard Test Method for Hiding Power of Architectural Paints Applied by Roller
  • D5151 – 06(2015) Standard Test Method for Detection of Holes in Medical Gloves
  • D5153 – 10(2016) Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption
  • D5153-RUS – 10(2016) Стандартный метод определения содержание палладия в катализаторе с молекулярным ситом с помощью атомной абсорбции
  • D5154 – 10 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
  • D5155 – 14e1 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates
  • D5156 – 02(2016) Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
  • D5157 – 97(2014) Standard Guide for Statistical Evaluation of Indoor Air Quality Models
  • D5158 – 98(2013) Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving
  • D5159 – 04(2014) Standard Guide for Dusting Attrition of Granular Activated Carbon
  • D5160 – 95(2014) Standard Guide for Gas-Phase Adsorption Testing of Activated Carbon
  • D5162 – 15 Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
  • D5163 – 16 Standard Guide for Establishing a Program for Condition Assessment of Coating Service Level I Coating Systems in Nuclear Power Plants
  • D5164 – 05(2011) Standard Specification for Propylene Glycol and Dipropylene Glycol
  • D5165 – 12 Standard Practice for Laboratory Preparation of Gelled Vehicles Using a Resin Kettle
  • D5166 – 97(2016) Standard Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven
  • D5167 – 13 Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation
  • D5168 – 12(2017) Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers
  • D5169 – 98(2015) Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners
  • D5170 – 98(2015) Standard Test Method for Peel Strength (“T” Method) of Hook and Loop Touch Fasteners
  • D5171 – 15 Standard Test Method for Impact Resistance of Plastic Sew-Through Buttons
  • D5172 – 91(2015) Standard Guide for Documenting the Standard Operating Procedures Used for the Analysis of Water
  • D5173 – 15 Standard Guide for On-Line Monitoring of Total Organic Carbon in Water by Oxidation and Detection of Resulting Carbon Dioxide
  • D5174 – 07(2013) Standard Test Method for Trace Uranium in Water by Pulsed-Laser Phosphorimetry
  • D5175 – 91(2017)e1 Standard Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography
  • D5176 – 08(2015) Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
  • D5178 – 16 Standard Test Method for Mar Resistance of Organic Coatings
  • D5179 – 16 Standard Test Method for Measuring Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method
  • D5181 – 09(2017) Standard Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester
  • D5182 – 97(2014) Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
  • D5182-RUS – 97(2014) Стандартный метод оценки противозадирных свойств масел (визуальный метод FZG)
  • D5183 – 05(2016) Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine
  • D5184 – 12(2017) Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
  • D5184-SP – 12(2017) Método de prueba estándar para determinación de aluminio y silicio en fueóleos por reducción a cenizas, fusión, espectrometría por emisión atómica de plasma acoplado inductivamente, y espectrometría por absorción atómica
  • D5185 – 13e1 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
  • D5185-RUS – 13e1 Стандартный метод многоэлементного анализа использованных и неиспользованных смазочных масел и базовых масел методом атомно-эмиссионной спектрометрии с индуктивно связанной плазмой
  • D5185-SP – 13e1 Método de prueba estándar para determinación multielemental de aceites lubricantes y aceites base usados y sin usar mediante espectrometría de emisión atómica de plasma acoplado inductivamente (ICPAES)
  • D5186 – 15 Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels By Supercritical Fluid Chromatography
  • D5186-SP – 15 Método de prueba estándar para determinación del contenido de aromáticos y contenido de aromáticos polinucleares de los gasóleos y combustibles para turbinas de aviones mediante cromatografía de fluidos supercríticos
  • D5187 – 10(2015)e1 Standard Test Method for Determination of Crystallite Size (Lc) of Calcined Petroleum Coke by X-Ray Diffraction
  • D5188 – 16 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber and Piston Based Method)
  • D5188-RUS – 16 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ ТЕМПЕРАТУРЫ ТОПЛИВА В СООТНОШЕНИИ ПАРОВОЙ И ЖИДКОЙ ФАЗ (МЕТОД С ПРИМЕНЕНИЕМ ВАКУУМНОЙ КАМЕРЫ И ПОРШНЯ)
  • D5191 – 15 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
  • D5191-RUS – 15 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ ДАВЛЕНИЯ ПАРОВ НЕФТЕПРОДУКТОВ (МИНИ-МЕТОД)
  • D5191-SP – 15 Método de prueba estándar para determinación de presión de vapor de productos derivados del petróleo (minimétodo)
  • D5192 – 09(2015) Standard Practice for Collection of Coal Samples from Core
  • D5193/D5193M – 93(2017) Standard Test Method for Coated Fabrics—Air Retention
  • D5194 – 18 Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons
  • D5195 – 14 Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods
  • D5196 – 06(2013) Standard Guide for Bio-Applications Grade Water
  • D5197 – 16 Standard Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology)
  • D5198 – 17 Standard Practice for Nitric Acid Digestion of Solid Waste
  • D5199 – 12 Standard Test Method for Measuring the Nominal Thickness of Geosynthetics
  • D5200 – 03(2014) Standard Test Method for Determination of Weight Percent Volatile Content of Solvent-Borne Paints in Aerosol Cans
  • D5201 – 05a(2014) Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings
  • D5202/D5202M – 16 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemically Grouted Soils
  • D5204 – 17 Standard Classification System and Basis for Specification for Polyamide-Imide (PAI) Molding and Extrusion Materials
  • D5205 – 16 Standard Classification System and Basis for Specification for Polyetherimide (PEI) Materials
  • D5206 – 13 Standard Test Method for Windload Resistance of Rigid Plastic Siding
  • D5207 – 14 Standard Practice for Confirmation of 20–mm (50–W) and 125–mm (500–W) Test Flames for Small-Scale Burning Tests on Plastic Materials
  • D5208 – 14 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
  • D5211 – 17 Standard Specification for Xylenes for p-Xylene Feedstock
  • D5213 – 12 Standard Specification for Polymeric Resin Film for Electrical Insulation and Dielectric Applications
  • D5215 – 93(2012) Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives
  • D5217 – 17 Standard Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials
  • D5219 – 15 Standard Terminology Relating to Body Dimensions for Apparel Sizing
  • D5220 – 14 Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method
  • D5222 – 16 Standard Specification for High Fire-Point Mineral Electrical Insulating Oils
  • D5224 – 12 Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds
  • D5225 – 17 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
  • D5226 – 16 Standard Practice for Dissolving Polymer Materials
  • D5227 – 13 Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins
  • D5228 – 16 Standard Test Method for Determination of Butane Working Capacity of Activated Carbon
  • D5229/D5229M – 14 Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials
  • D5230 – 14e1 Standard Test Method for Carbon Black—Automated Individual Pellet Hardness
  • D5230-RUS – 14e1 Стандартный метод автоматического определения твердости одиночных гранул технического углерода
  • D5231 – 92(2016) Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste
  • D5232 – 13 Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
  • D5233 – 92(2017) Standard Test Method for Single Batch Extraction Method for Wastes
  • D5234 – 92(2017) Standard Guide for Analysis of Ethylene Product
  • D5235 – 14 Standard Test Method for Microscopic Measurement of Dry Film Thickness of Coatings on Wood Products
  • D5236 – 17 Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)
  • D5236-RUS – 17 Стандартный метод перегонки смесей тяжелых углеводородов (метод с применением вакуумного перегонного куба)
  • D5237 – 14 Standard Guide for Evaluating Fabric Softeners
  • D5238 – 10 Standard Test Method for Smoldering Combustion Potential of Cotton-Based Batting
  • D5239 – 12 Standard Practice for Characterizing Fly Ash for Use in Soil Stabilization
  • D5240/D5240M – 12(2013) Standard Test Method for Evaluation of Durability of Rock for Erosion Control Using Sodium Sulfate or Magnesium Sulfate
  • D5241 – 92(2017) Standard Practice for Micro-Extraction of Water for Analysis of Volatile and Semi-Volatile Organic Compounds in Water
  • D5242 – 92(2013) Standard Test Method for Open-Channel Flow Measurement of Water with Thin-Plate Weirs
  • D5243 – 92(2013) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly at Culverts
  • D5245 – 92(2012) Standard Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses
  • D5246 – 15 Standard Test Method for Isolation and Enumeration of Pseudomonas aeruginosa from Water
  • D5248 – 04(2015) Standard Specification for Reclaimed 1,1,2-Trichloro 1,2,2-Trifluoroethane
  • D5249 – 10(2016) Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints
  • D5250 – 06(2015) Standard Specification for Poly(vinyl chloride) Gloves for Medical Application
  • D5252 – 15 Standard Practice for the Operation of the Hexapod Tumble Drum Tester
  • D5253 – 04(2016) Standard Terminology Relating to Floor Coverings and Textile Upholstered Furniture
  • D5254/D5254M – 92(2010)e1 Standard Practice for Minimum Set of Data Elements to Identify a Groundwater Site
  • D5255 – 15 Standard Practice for Certification of Personnel Engaged in the Testing of Soil and Rock
  • D5256 – 14 Standard Test Method for Relative Efficacy of Dynamic Solvent Systems for Dissolving Water-Formed Deposits
  • D5257 – 17 Standard Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography
  • D5258 – 02(2013) Standard Practice for Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating
  • D5259 – 14 Standard Test Method for Isolation and Enumeration of Enterococci from Water by the Membrane Filter Procedure
  • D5260 – 16 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
  • D5261 – 10 Standard Test Method for Measuring Mass per Unit Area of Geotextiles
  • D5262 – 07(2016) Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics
  • D5263 – 15 Standard Test Method for Determining the Relative Degree of Oxidation in Bituminous Coal by Alkali Extraction
  • D5264 – 98(2011) Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester
  • D5264-RUS – 98(2011) Стандартная методика определения сопротивления изнашиванию (стойкости) печатного материала посредствомаппарата для определения сопротивления истеранию Сатерленда
  • D5265 – 09(2016) Standard Test Method for Bridge Impact Testing
  • D5266 – 13 Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints
  • D5267 – 97(2017) Standard Test Method for Determination of Extrudability of Cartridge Adhesives
  • D5268 – 13 Standard Specification for Topsoil Used for Landscaping Purposes
  • D5269 – 15 Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method
  • D5270 – 96(2014) Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers
  • D5272 – 08(2013) Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics
  • D5273 – 92(2012) Standard Guide for Analysis of Propylene Concentrates
  • D5274 – 00(2014) Standard Guide for Analysis of 1,3–Butadiene Product
  • D5275 – 17 Standard Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids
  • D5276 – 98(2017) Standard Test Method for Drop Test of Loaded Containers by Free Fall
  • D5277 – 92(2015) Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
  • D5278/D5278M – 09(2017) Standard Test Method for Elongation of Narrow Elastic Fabrics (Static-Load Testing)
  • D5279 – 13 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion
  • D5280 – 96(2013) Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions
  • D5282 – 05(2012) Standard Test Methods for Compatibility of Construction Material with Silicone Fluid Used for Electrical Insulation
  • D5283 – 92(2009) Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Quality Assurance and Quality Control Planning and Implementation
  • D5284 – 09(2017) Standard Test Method for Sequential Batch Extraction of Waste with Acidic Extraction Fluid
  • D5286 – 01(2017) Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints
  • D5287 – 08(2015) Standard Practice for Automatic Sampling of Gaseous Fuels
  • D5288 – 14 Standard Test Method for Determining Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
  • D5289 – 17 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
  • D5291 – 16 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
  • D5291-RUS – 16 Стандартные методы определения углерода, водорода и азота в нефтепродуктах и смазочных материалах с помощью приборов
  • D5292 – 99(2014) Standard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy
  • D5293 – 17a Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –10 °C and –35 °C Using Cold-Cranking Simulator
  • D5295/D5295M – 14 Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems
  • D5296 – 11 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
  • D5297 – 95(2014) Standard Test Methods for Rubber Chemical Accelerator—Purity by High Performance Liquid Chromatography
  • D5298 – 16 Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper
  • D5299 – 99(2012)e1 Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities
  • D5301 – 92(2016) Standard Practice for Physical Characterization of Paint Brushes
  • D5303 – 92(2012) Standard Test Method for Trace Carbonyl Sulfide in Propylene by Gas Chromatography
  • D5304 – 15 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
  • D5305 – 12 Standard Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor
  • D5306 – 92(2013) Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids
  • D5309 – 17 Standard Specification for Cyclohexane 999
  • D5310 – 10(2014) Standard Test Method for Tar Acid Composition by Capillary Gas Chromatography
  • D5311/D5311M – 13 Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil
  • D5311/D5311M-RUS – 13 Стандартный метод циклических трехосных испытаний грунтов на прочность с регулированием нагрузки
  • D5312/D5312M – 12(2013) Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions
  • D5313/D5313M – 12(2013) Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions
  • D5315 – 04(2017)e1 Standard Test Method for Determination of N-Methyl-Carbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post-Column Derivatization
  • D5316 – 98(2017) Standard Test Method for 1,2-Dibromoethane and 1,2-Dibromo-3-Chloropropane in Water by Microextraction and Gas Chromatography
  • D5317 – 98(2017) Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector
  • D5319 – 17 Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels
  • D5321/D5321M – 17 Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear
  • D5322 – 17 Standard Practice for Laboratory Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids
  • D5323 – 92(2011) Standard Practice for Determination of 2 % Secant Modulus for Polyethylene Geomembranes
  • D5324 – 16 Standard Guide for Testing Water-Borne Architectural Coatings
  • D5325 – 03(2014) Standard Test Method for Determination of Weight Percent Volatile Content of Water-Borne Aerosol Paints
  • D5326 – 94a(2013) Standard Test Method for Color Development in Tinted Latex Paints
  • D5327 – 97(2013) Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
  • D5329 – 16 Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements
  • D5330/D5330M – 06(2012)e1 Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced
  • D5331 – 03(2016) Standard Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films
  • D5334 – 14 Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure
  • D5334-RUS – 14 Стандартный метод испытаний для определения теплопроводности грунта и мягкой горной породы с помощью игольчатого температурного зонда
  • D5335 – 14 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges
  • D5336 – 15a Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Material
  • D5337 – 11(2016) Standard Practice for Flow Rate Adjustment of Personal Sampling Pumps
  • D5338 – 15 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions, Incorporating Thermophilic Temperatures
  • D5340 – 12 Standard Test Method for Airport Pavement Condition Index Surveys
  • D5341/D5341M – 17a Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR)
  • D5343 – 06(2012)e1 Standard Guide for Evaluating Cleaning Performance of Ceramic Tile Cleaners
  • D5344 – 99(2017) Standard Test Method for Extension Force of Partially Oriented Yarn
  • D5346 – 17 Standard Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors and Softening Compounds
  • D5347 – 95(2012) Standard Test Method for Determination of the Ash Content of Fats and Oils
  • D5348 – 95(2012) Standard Test Method for Determination of the Moisture Content of Sulfonated and Sulfated Oils by Distillation with Xylene
  • D5349 – 95(2012) Standard Test Method for Determination of the Moisture and Volatile Content of Sulfonated and Sulfated Oils by Hot-Plate Method
  • D5350 – 95(2012) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Method A
  • D5351 – 93(2017) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Extraction Titration, Test Method B
  • D5352 – 95(2012) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
  • D5353 – 95(2012) Standard Test Method for Determination of Total Desulfated Fatty Matter
  • D5354 – 95(2012) Standard Test Method for Determination of Total Active Ingredients in Sulfonated and Sulfated Oils
  • D5355 – 95(2017) Standard Test Method for Specific Gravity of Oils and Liquid Fats
  • D5356 – 17a Standard Test Method for pH of Chrome Tanning Solutions
  • D5357 – 03(2013) Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction
  • D5358 – 93(2014) Standard Practice for Sampling with a Dipper or Pond Sampler
  • D5359 – 98(2015) Standard Specification for Glass Cullet Recovered from Waste for Use in Manufacture of Glass Fiber
  • D5360 – 15 Standard Practice for Design and Construction of Bituminous Surface Treatments
  • D5361/D5361M – 16 Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing
  • D5362 – 13 Standard Test Method for Snagging Resistance of Fabrics (Bean Bag)
  • D5363 – 16 Standard Specification for Anaerobic Single-Component Adhesives (AN)
  • D5364 – 14 Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced (FRP) Plastic Chimney Liners with Coal-Fired Units
  • D5365 – 12 Standard Test Method for Long-Term Ring-Bending Strain of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
  • D5366 – 96(2017) Standard Test Method for Determining the Dynamic Performance of a Wind Vane
  • D5367 – 16 Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted
  • D5370 – 14 Standard Specification for Pozzolanic Blended Materials in Construction Applications
  • D5372 – 17 Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids
  • D5373 – 16 Standard Test Methods for Determination of Carbon, Hydrogen and Nitrogen in Analysis Samples of Coal and Carbon in Analysis Samples of Coal and Coke
  • D5373-RUS – 16 Стандартные методы определения углерода, водорода и азота в аналитических пробах угля и определение углерода в аналитических пробах угля и кокса
  • D5374 – 13 Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
  • D5375/D5375M – 98(2011) Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock
  • D5376 – 06(2017) Standard Test Method for Rubber Compounding Materials—Determination of the Basic Nitrogen Content in Rubber Antioxidant: Polymerized TMQ
  • D5377 – 93(2017) Standard Classification for Rubber Compounding Materials—Ground Coal
  • D5378 – 12 Standard Performance Specification for Woven and Knitted Shower Curtains for Institutional and Household Use
  • D5379/D5379M – 12 Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
  • D5380 – 93(2014) Standard Test Method for Identification of Crystalline Pigments and Extenders in Paint by X-Ray Diffraction Analysis
  • D5381 – 93(2014) Standard Guide for X-Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders
  • D5382 – 02(2017) Standard Guide to Evaluation of Optical Properties of Powder Coatings
  • D5383 – 16 Standard Practice for Visual Determination of the Lightfastness of Art Materials by Artists and Art Technologists
  • D5384 – 14 Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)
  • D5385/D5385M – 93(2014)e1 Standard Test Method for Hydrostatic Pressure Resistance of Waterproofing Membranes
  • D5386 – 16 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
  • D5387 – 93(2013) Standard Guide for Elements of a Complete Data Set for Non-Cohesive Sediments
  • D5388 – 93(2013) Standard Test Method for Indirect Measurements of Discharge by Step-Backwater Method
  • D5389 – 93(2013) Standard Test Method for Open-Channel Flow Measurement by Acoustic Velocity Meter Systems
  • D5390 – 93(2013) Standard Test Method for Open-Channel Flow Measurement of Water with Palmer-Bowlus Flumes
  • D5391 – 14 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
  • D5391-RUS – 14 Стандартный метод определения удельной электропроводности и удельного электрического сопротивления пробы высокочистой проточной воды
  • D5392 – 14 Standard Test Method for Isolation and Enumeration of Escherichia Coli in Water by the Two-Step Membrane Filter Procedure
  • D5395 – 03(2013) Standard Specification for Reclaimed Methylene Chloride
  • D5396 – 04(2015) Standard Specification for Reclaimed Perchloroethylene
  • D5397 – 07(2012) Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
  • D5398 – 97(2010) Standard Practice for Visual Evaluation of the Lightfastness of Art Materials by the User
  • D5399 – 09(2017) Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography
  • D5400 – 15 Standard Test Methods for Hydroxypropylcellulose
  • D5401 – 03(2014) Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood
  • D5402 – 15 Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
  • D5402-RUS – 15 Стандартная методика оценки стойкости органических покрытий к действию растворителей с помощью протирания растворителем
  • D5403 – 93(2013) Standard Test Methods for Volatile Content of Radiation Curable Materials
  • D5404/D5404M – 12(2017) Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator
  • D5405/D5405M – 98(2015) Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material
  • D5406 – 93(2016) Standard Practice for Rubber—Calculation of Producer’s Process Performance Indexes
  • D5408 – 93(2010)e1 Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part One – Additional Identification Descriptors
  • D5409/D5409M – 93(2010)e1 Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part Two – Physical Descriptors
  • D5411 – 10(2015) Standard Practice for Calculation of Average Energy Per Disintegration (¯E) for a Mixture of Radionuclides in Reactor Coolant
  • D5412 – 93(2017)e1 Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water
  • D5413 – 93(2013) Standard Test Methods for Measurement of Water Levels in Open-Water Bodies
  • D5414 – 95(2012) Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films
  • D5415 – 95(2012) Standard Test Method for Evaluating Load Containment Performance of Stretch Wrap Films by Vibration Testing
  • D5416 – 95(2012) Standard Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing
  • D5417 – 16 Standard Practice for Operation of the Vettermann Drum Tester
  • D5418 – 15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)
  • D5419 – 14a Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures
  • D5420 – 16 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
  • D5421 – 15 Standard Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
  • D5422 – 17 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
  • D5423 – 14 Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
  • D5424 – 14 Standard Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
  • D5425 – 14 Standard Guide for Development of Fire Hazard Assessment Standards of Electrotechnical Products
  • D5426 – 12(2017) Standard Practices for Visual Inspection and Grading of Fabrics Used for Inflatable Restraints
  • D5427 – 09(2014) Standard Practice for Accelerated Aging of Inflatable Restraint Fabrics
  • D5428 – 08(2013) Standard Practice for Evaluating the Performance of Inflatable Restraint Modules
  • D5430 – 13(2017) Standard Test Methods for Visually Inspecting and Grading Fabrics
  • D5431 – 08(2013) Standard Performance Specification for Woven and Knitted Sheeting Products for Institutional and Household Use
  • D5432 – 12 Standard Performance Specification for Blanket Products for Institutional and Household Use
  • D5433 – 12 Standard Performance Specification for Towel Products for Institutional and Household Use
  • D5434 – 12 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock
  • D5435 – 13 Standard Test Method for Diagnostic Soil Test for Plant Growth and Food Chain Protection
  • D5436 – 15 Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes
  • D5438 – 17 Standard Practice for Collection of Floor Dust for Chemical Analysis
  • D5439 – 95(2012) Standard Test Method for Determination of Sediment in Moellon
  • D5440 – 17 Standard Test Method for Determining the Melting Point of Fats and Oils
  • D5441 – 98(2017) Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography
  • D5442 – 17 Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography
  • D5443 – 14 Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200 °C by Multi-Dimensional Gas Chromatography
  • D5443-RUS – 14 Стандартный метод структурно-группового анализа содержания парафинов, нафтенов и ароматических углеводородов с температурой кипения до 200°C с помощью многомерной газовой хроматографии1
  • D5444 – 15 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate
  • D5445 – 15 Standard Practice for Pictorial Markings for Handling of Goods
  • D5446 – 08(2013) Standard Practice for Determining Physical Properties of Fabrics, Yarns, and Sewing Thread Used in Inflatable Restraints
  • D5447 – 04(2010) Standard Guide for Application of a Groundwater Flow Model to a Site-Specific Problem
  • D5448/D5448M – 16 Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
  • D5449/D5449M – 16 Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
  • D5450/D5450M – 16 Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
  • D5451 – 93(2016) Standard Practice for Sampling Using a Trier Sampler
  • D5452 – 12 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
  • D5452-RUS – 12 Стандартный метод определения загрязнений авиационных топлив твердыми частицами с помощью лабораторной фильтрации
  • D5453 – 16e1 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
  • D5453-RUS – 16e1 Стандартный метод определения общего содержания серы в легких углеводородах, топливах для двигателей с искровым зажиганием и дизельных двигателей, а также моторном масле с помощью УФ-флюоресценции
  • D5453-SP – 16e1 Método de prueba estándar para la determinación del azufre total en hidrocarburos ligeros, combustibles para motores de ignición por chispa, combustibles para motor diésel y aceites para motor mediante fluorescencia ultravioleta
  • D5454 – 11e1 Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
  • D5454-RUS – 11e1 Стандартный метод определения содержания водяных паров в газообразных топливах с помощью электронных анализаторов влажности
  • D5456 – 17e1 Standard Specification for Evaluation of Structural Composite Lumber Products
  • D5457 – 17 Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design
  • D5458 – 95(2012) Standard Test Method for Peel Cling of Stretch Wrap Film
  • D5459 – 95(2012) Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film
  • D5460 – 02(2017) Standard Test Method for Rubber Compounding Materials—Water in Rubber Additives
  • D5461 – 06(2017) Standard Test Method for Rubber Compounding Materials—Wet Sieve Analysis of Powdered Rubber Compounding Materials
  • D5462 – 13 Standard Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water
  • D5463 – 13 Standard Guide for Use of Test Kits to Measure Inorganic Constituents in Water
  • D5464 – 16 Standard Test Method for pH Measurement of Water of Low Conductivity
  • D5464-RUS – 16 СТАНДАРТНЫЙ МЕТОД ИЗМЕРЕНИЯ ПОКАЗАТЕЛЯ pHВОДЫ С НИЗКОЙ ЭЛЕТКРОПРОВОДНОСТЬЮСТАНДАРТНЫЙ МЕТОД ИЗМЕРЕНИЯ ПОКАЗАТЕЛЯ pHВОДЫ С НИЗКОЙ ЭЛЕТКРОПРОВОДНОСТЬЮ
  • D5465 – 16 Standard Practices for Determining Microbial Colony Counts from Waters Analyzed by Plating Methods
  • D5466 – 15 Standard Test Method for Determination of Volatile Organic Compounds in Atmospheres (Canister Sampling Methodology)
  • D5467/D5467M – 97(2017) Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam
  • D5469/D5469M – 12 Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems
  • D5470 – 17 Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials
  • D5471 – 17 Standard Specification for O-Xylene 980
  • D5472/D5472M – 14 Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well
  • D5473/D5473M – 15 Standard Test Method for (Analytical Procedure for) Analyzing the Effects of Partial Penetration of Control Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a Nonleaky Confined Aquifer
  • D5474 – 93(2012) Standard Guide for Selection of Data Elements for Groundwater Investigations
  • D5477 – 11 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)
  • D5478 – 13 Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
  • D5479 – 94(2013) Standard Practice for Testing Biofouling Resistance of Marine Coatings Partially Immersed
  • D5481 – 13 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
  • D5481-RUS – 13 Стандартный метод определения кажущейся вязкости масел при высоких температурах и высоких скоростях сдвига с помощью многокамерного капиллярного вискозиметра
  • D5482 – 07(2013) Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method—Atmospheric)
  • D5483 – 05(2015) Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
  • D5485 – 16 Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter
  • D5486/D5486M – 06(2012) Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing
  • D5487 – 16 Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines
  • D5489 – 14 Standard Guide for Care Symbols for Care Instructions on Textile Products
  • D5490 – 93(2014)e1 Standard Guide for Comparing Groundwater Flow Model Simulations to Site-Specific Information
  • D5491 – 08(2014) Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials
  • D5492 – 17 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics
  • D5493 – 06(2016) Standard Test Method for Permittivity of Geotextiles Under Load
  • D5494 – 93(2011) Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes
  • D5495 – 03(2016) Standard Practice for Sampling With a Composite Liquid Waste Sampler (COLIWASA)
  • D5496 – 15 Standard Practice for In Field Immersion Testing of Geosynthetics
  • D5498 – 12a Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities
  • D5499 – 94(2013) Standard Test Methods for Heat Resistance of Polymer Linings for Flue Gas Desulfurization Systems
  • D5500 – 16 Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
  • D5501 – 12(2016) Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20% Ethanol by Gas Chromatography
  • D5502 – 00(2015) Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry
  • D5504 – 12 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
  • D5504-RUS – 12 Стандартный метод определения соединений серы в природном газе и газовых топливах при помощи газовой хроматографии и хемилюминесценции
  • D5505 – 14 Standard Practice for Classifying Emulsified Recycling Agents
  • D5507 – 99(2012) Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography
  • D5508 – 16 Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)
  • D5511 – 12 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
  • D5513 – 15 Standard Practice for Microwave Digestion of Industrial Furnace Feed Streams and Waste for Trace Element Analysis
  • D5514/D5514M – 14 Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics
  • D5515 – 17a Standard Test Method for Determination of the Swelling Properties of Bituminous Coal Using a Dilatometer
  • D5516 – 17 Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures
  • D5517 – 14 Standard Test Method for Determining Extractability of Metals from Art Materials
  • D5519 – 15 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
  • D5520 – 11 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression
  • D5521/D5521M – 13 Standard Guide for Development of Groundwater Monitoring Wells in Granular Aquifers
  • D5523 – 15 Standard Test Method for Polyurethane Raw Materials: Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates
  • D5526 – 12 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions
  • D5527 – 00(2017)e1 Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means
  • D5528 – 13 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
  • D5530 – 15 Standard Test Method for Total Moisture of Hazardous Waste Fuel by Karl Fischer Titrimetry
  • D5531 – 17 Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings
  • D5534 – 94(2011)e1 Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids
  • D5536 – 17 Standard Practice for Sampling Forest Trees for Determination of Clear Wood Properties
  • D5537 – 14 Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
  • D5538 – 13 Standard Practice for Thermoplastic Elastomers—Terminology and Abbreviations
  • D5539 – 14 Standard Specification for Seed Starter Mix
  • D5540 – 13 Standard Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis
  • D5541 – 94(2014) Standard Practice for Developing a Stage-Discharge Relation for Open Channel Flow
  • D5542 – 16 Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography
  • D5543 – 15 Standard Test Method for Low-Level Dissolved Oxygen in Water
  • D5544 – 16 Standard Test Method for On-Line Measurement of Residue After Evaporation of High-Purity Water
  • D5547 – 95(2017) Standard Test Method for Clay and Zeolite in Powdered Laundry Detergents by Atomic Absorption
  • D5548 – 13 Standard Guide for Evaluating Color Transfer or Color Loss of Dyed Fabrics in Laundering (Not Suitable for Detergent or Washing Machine Rankings)
  • D5550 – 14 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
  • D5551 – 95(2012) Standard Test Method for Determination of the Cloud Point of Oil
  • D5552 – 10(2015) Standard Test Method for Resistance of Colored Leather to Bleeding
  • D5553 – 95(2012) Standard Test Method for Determination of the Unsaponifiable Nonvolatile Matter in Sulfated Oils
  • D5554 – 15 Standard Test Method for Determination of the Iodine Value of Fats and Oils
  • D5555 – 95(2017) Standard Test Method for Determination of Free Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils Used in Fat Liquors and Stuffing Compounds
  • D5556 – 95(2011) Standard Test Method for Determination of the Moisture and Other Volatile Matter Contained in Fats and Oils Used in Fat Liquors and Softening Compounds
  • D5557 – 95(2017) Standard Test Method for Determination of Insoluble Impurities Contained in Fats and Oils Used in Fat Liquors and Stuffing Compounds
  • D5558 – 95(2017) Standard Test Method for Determination of the Saponification Value of Fats and Oils
  • D5559 – 95(2017) Standard Test Method for Determination of Acidity as Free Fatty Acids/Acid Number in the Absence of Ammonium or Triethanolamine Soaps in Sulfonated and Sulfated Oils
  • D5560 – 95(2011) Standard Test Method for Determination of Neutral Fatty Matter Contained in Fats and Oils
  • D5562 – 95(2011) Standard Test Method for Determination of the Acidity as Free Fatty Acids/Acid Number in the Presence of Ammonium or Triethanolamine Soaps
  • D5564 – 95(2011) Standard Test Method for Determination of the Total Ammonia Contained in Sulfonated or Sulfated Oils
  • D5565 – 95(2011) Standard Test Method for Determination of the Solidification Point of Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils
  • D5566 – 95(2011) Standard Test Method for Determination of Inorganic Salt Content of Sulfated and Sulfonated Oils
  • D5567 – 94(2011) Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems
  • D5568 – 14 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Waveguide
  • D5570/D5570M – 10(2015) Standard Test Method for Water Resistance of Tape and Adhesives Used as Box Closure
  • D5571 – 16 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity
  • D5572 – 95(2012) Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products
  • D5573 – 99(2012) Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints
  • D5574 – 94(2012) Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints
  • D5575 – 07(2013) Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers
  • D5576 – 00(2013) Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)
  • D5577 – 94(2010)e1 Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics
  • D5578 – 04(2015) Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method)
  • D5579 – 16 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test
  • D5580 – 15 Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography
  • D5580-RUS – 15 Стандартный метод испытаний для определения концентрации бензола, толуола, этиленбензола, п/м-ксилола, o-ксилола, C9 и более высокомолекулярных ароматических соединений, а также общего содержания ароматических соединений в конечном бензине с помощью газовой хроматографии
  • D5580-SP – 15 Método de prueba estándar para determinación de benceno, tolueno, etilbenceno, p/m-xileno, o-xileno, C9 y componentes aromáticos más pesados, y el total de aromáticos en la gasolina terminada mediante una cromatografía de gases
  • D5581 – 07a(2013) Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)
  • D5582 – 14 Standard Test Method for Determining Formaldehyde Levels from Wood Products Using a Desiccator
  • D5585 – 11e1 Standard Tables of Body Measurements for Adult Female Misses Figure Type, Size Range 00–20
  • D5586/D5586M – 10 Standard Tables of Body Measurements for Women Aged 55 and Older (All Figure Types)
  • D5587 – 15 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
  • D5588 – 97(2017) Standard Test Method for Determination of the Microbial Condition of Paint, Paint Raw Materials, and Plant Areas
  • D5589 – 09(2013) Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Algal Defacement
  • D5590 – 00(2010)e1 Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay
  • D5591 – 04(2016) Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
  • D5592 – 94(2010) Standard Guide for Material Properties Needed in Engineering Design Using Plastics
  • D5594 – 98(2012) Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
  • D5594-RUS – 98(2012) Стандартный метод определения содержания винилацетата в сополимерах этиленвинилацетата (EVA) с помощью инфракрасной Фурье-спектроскопии (FT-IR)
  • D5596 – 03(2016) Standard Test Method For Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics
  • D5598 – 01(2012) Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling
  • D5599 – 17 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
  • D5599-RUS – 17 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ ОКСИГЕНАТОВ В БЕНЗИНЕ С ПОМОЩЬЮ ГАЗОВОЙ ХРОМАТОГРАФИИ С КИСЛОРОД-СЕЛЕКТИВНЫМ ПЛАМЕННО- ИОНИЗАЦИОННЫМ ДЕТЕКТОРОМ
  • D5600 – 17 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
  • D5600-RUS – 17 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ МЕТАЛЛИЧЕСКИХ МИКРОЭЛЕМЕНТОВ В НЕФТЯНОМ КОКСЕ С ПОМОЩЬЮ АТОМНО-ЭМИССИОННОЙ СПЕКТРОМЕТРИИ С ИНДУКТИВНО СВЯЗАННОЙ ПЛАЗМОЙ (ИСП-АЭС)
  • D5602/D5602M – 11 Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens
  • D5603 – 01(2015) Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber
  • D5604 – 96(2017) Standard Test Methods for Precipitated Silica—Surface Area by Single Point B.E.T. Nitrogen Adsorption
  • D5605 – 94(2016) Standard Practice for Styrene-Butadiene Rubber (SBR)—Establishing Raw Mooney Viscosity Target Values
  • D5606 – 17 Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock
  • D5607 – 16 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force
  • D5608 – 16 Standard Practices for Decontamination of Sampling and Non Sample Contacting Equipment Used at Low Level Radioactive Waste Sites
  • D5609 – 16 Standard Guide for Defining Boundary Conditions in Groundwater Flow Modeling
  • D5610 – 94(2014) Standard Guide for Defining Initial Conditions in Groundwater Flow Modeling
  • D5611 – 94(2016) Standard Guide for Conducting a Sensitivity Analysis for a Groundwater Flow Model Application
  • D5612 – 94(2013) Standard Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program
  • D5613 – 94(2014) Standard Test Method for Open-Channel Measurement of Time of Travel Using Dye Tracers
  • D5614 – 94(2014) Standard Test Method for Open Channel Flow Measurement of Water with Broad-Crested Weirs
  • D5616 – 04(2016) Standard Specification for Reclaimed Trichloroethylene
  • D5617 – 04(2015) Standard Test Method for Multi-Axial Tension Test for Geosynthetics
  • D5618 – 94(2011) Standard Test Method for Measurement of Barnacle Adhesion Strength in Shear
  • D5621 – 07(2013) Standard Test Method for Sonic Shear Stability of Hydraulic Fluids
  • D5622 – 17 Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis
  • D5623 – 94(2014) Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
  • D5623-RUS – 94(2014) Стандартный метод определения соединений серы в светлых жидких нефтяных углеводородах с использованием газовой хроматографии и селективного детектирования серы
  • D5624 – 13 Standard Practice for Determining the Transverse-Aggregate Spread Rate for Surface Treatment Applications
  • D5627 – 17 Standard Test Method for Water Extractable Residue from Particulate Ion-Exchange Resins
  • D5628 – 10 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
  • D5629 – 16 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers
  • D5630 – 13 Standard Test Method for Ash Content in Plastics
  • D5631 – 15 Standard Practice for Handling, Transportation, and Storage of Halon 1301, Bromotrifluoromethane (CF3Br)
  • D5632/D5632M – 17 Standard Specification for Halon 1301, Bromotrifluoromethane (CF3Br)
  • D5633 – 04(2016) Standard Practice for Sampling with a Scoop
  • D5635/D5635M – 11 Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens
  • D5636/D5636M – 94(2017) Standard Test Method for Low Temperature Unrolling of Felt or Sheet Roofing and Waterproofing Materials
  • D5637 – 05(2017) Standard Test Method for Moisture Resistance of Electrical Insulating Varnishes
  • D5638 – 14 Standard Test Method for Chemical Resistance of Electrical Insulating Varnishes
  • D5639/D5639M – 11(2015) Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements
  • D5640 – 95(2014) Standard Guide for Selection of Weirs and Flumes for Open-Channel Flow Measurement of Water
  • D5641/D5641M – 16 Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber
  • D5642 – 16 Standard Test Method for Sealed Tube Chemical Compatibility Test
  • D5643/D5643M – 06(2012)e1 Standard Specification for Coal Tar Roof Cement, Asbestos Free
  • D5644 – 01(2013) Standard Test Methods for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
  • D5646 – 13 Standard Terminology Relating to Seams and Stitches Used in Home Sewing
  • D5647 – 07(2012) Standard Guide for Measuring Hairiness of Yarns by the Photo-Electric Apparatus
  • D5648 – 01(2014) Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)
  • D5649 – 15 Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners
  • D5651 – 13 Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials
  • D5652 – 15 Standard Test Methods for Single-Bolt Connections in Wood and Wood-Based Products
  • D5656 – 10(2017) Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
  • D5657 – 07(2014) Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners
  • D5658 – 13 Standard Practice for Sampling Unconsolidated Waste From Trucks
  • D5659 – 14 Standard Test Method for Chlorophenoxy Acid Herbicides in Waste Using HPLC
  • D5662 – 17a Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers
  • D5663 – 15 Standard Guide for Validating Recycled Content in Packaging Paper and Paperboard
  • D5664 – 17 Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber
  • D5665/D5665M – 99a(2014)e1 Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing
  • D5666 – 95(2014) Standard Test Method for Rubber Chemical Antidegradants—Purity of p -Phenylenediamine (PPD) Antidegradants by High Performance Liquid Chromatography
  • D5667 – 95(2015) Standard Test Method for Rubber From Synthetic Sources—Total and Water Soluble Ash
  • D5667-RUS – 95(2015) Стандартный метод испытаний каучука промышленного производства — общая и водорастворимая зола
  • D5668 – 09(2014) Standard Test Methods for Rubber From Synthetic Sources—Volatile Matter
  • D5670 – 95(2014) Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
  • D5671 – 95(2011) Standard Practice for Polishing and Etching Coal Samples for Microscopical Analysis by Reflected Light
  • D5672/D5672M – 15 Standard Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm [1-in.] Deflection Technique
  • D5673 – 16 Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry
  • D5674 – 95(2014) Standard Guide for Operation of a Gaging Station
  • D5675 – 13 Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders
  • D5677 – 17 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
  • D5678 – 17 Standard Test Method for Freeze/Thaw Resistance of Wax Emulsion Floor Polish
  • D5679 – 16 Standard Practice for Sampling Consolidated Solids in Drums or Similar Containers
  • D5680 – 14 Standard Practice for Sampling Unconsolidated Solids in Drums or Similar Containers
  • D5681 – 17 Standard Terminology for Waste and Waste Management
  • D5682 – 08(2012) Standard Test Methods for Electrical Resistivity of Liquid Paint and Related Materials
  • D5683/D5683M – 95(2017) Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes
  • D5684 – 12 Standard Terminology Relating to Pile Floor Coverings
  • D5685 – 11 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
  • D5687/D5687M – 95(2015) Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation
  • D5702 – 07(2012) Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
  • D5703 – 95(2013) Standard Practice for Preparatory Surface Cleaning for Clay Brick Masonry
  • D5704 – 17 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles
  • D5705 – 15 Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils
  • D5705-RUS – 15 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ СЕРОВОДОРОДА В ПАРОВОЙ ФАЗЕ НАД ОСТАТОЧНЫМ НЕФТЯНЫМ ТОПЛИВОМ
  • D5706 – 16 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
  • D5707 – 16 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
  • D5708 – 15 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry
  • D5708-RUS – 15 Стандартные методы определения содержания никеля, ванадия и железа в сырой нефти и мазуте с помощью атомно-эмиссионной спектрометрии с индуктивно связанной плазмой (ИСП)
  • D5708-SP – 15 Método de prueba estándar para determinación de níquel, vanadio y hierro en petróleo crudo y combustibles residuales por espectrometría de emisión atómica de plasma acoplado inductivamente (ICP)
  • D5709 – 09(2015) Standard Test Method for Sieve Analysis of Petroleum Coke
  • D5710/D5710M – 15 Standard Specification for Trinidad Lake Modified Asphalt
  • D5712 – 15 Standard Test Method for Analysis of Aqueous Extractable Protein in Latex, Natural Rubber, and Elastomeric Products Using the Modified Lowry Method
  • D5713 – 14 Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography
  • D5713-RUS – 14 Стандартный метод анализа бензола высокой степени очистки, используемого в качестве исходного продукта для получения циклогексана, с использованием капиллярной газовой хроматографии
  • D5715 – 14 Standard Practice for Estimating the Degree of Humification of Peat and Other Organic Soils (Visual/Manual Method)
  • D5716/D5716M – 15 Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir
  • D5718 – 13 Standard Guide for Documenting a Groundwater Flow Model Application
  • D5719 – 13 Standard Guide for Simulation of Subsurface Airflow Using Groundwater Flow Modeling Codes
  • D5721 – 08(2013) Standard Practice for Air-Oven Aging of Polyolefin Geomembranes
  • D5722 – 14 Standard Practice for Performing Accelerated Outdoor Weathering of Factory-Coated Embossed Hardboard Using Concentrated Natural Sunlight and a Soak-Freeze-Thaw Procedure
  • D5723 – 95(2015) Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence
  • D5724 – 16 Standard Specification for Gouache Paints
  • D5726 – 98(2013) Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing
  • D5727/D5727M – 00(2017) Standard Specification for Emulsified Refined Coal Tar (Mineral Colloid Type)
  • D5728 – 12 Standard Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport
  • D5731 – 16 Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications
  • D5737/D5737M – 14 Standard Guide for Methods for Measuring Well Discharge
  • D5739 – 06(2013) Standard Practice for Oil Spill Source Identification by Gas Chromatography and Positive Ion Electron Impact Low Resolution Mass Spectrometry
  • D5740 – 16 Standard Guide for Writing Material Standards in the Classification Format
  • D5741 – 96(2017) Standard Practice for Characterizing Surface Wind Using a Wind Vane and Rotating Anemometer
  • D5742 – 16 Standard Test Method for Determination of Butane Activity of Activated Carbon
  • D5743 – 97(2013) Standard Practice for Sampling Single or Multilayered Liquids, With or Without Solids, in Drums or Similar Containers
  • D5744 – 13e1 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
  • D5745 – 15 Standard Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation
  • D5746 – 98(2016) Standard Classification of Environmental Condition of Property Area Types for Defense Base Closure and Realignment Facilities
  • D5747/D5747M – 08(2013)e1 Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids
  • D5748 – 95(2012) Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film
  • D5748-RUS – 95(2012) Стандартный метод испытаний прочности на прокол растягивающейся оберточной пленки на выступающих частях
  • D5749 – 17 Standard Specification for Reinforced and Plain Gummed Tape for Sealing and Securing
  • D5750/D5750M – 95(2012) Standard Guide for Width and Length of Pressure-Sensitive Tape
  • D5751 – 99(2012) Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products
  • D5752 – 10(2017) Standard Specification for Supplemental Coolant Additives (SCAs) for Use in Precharging Coolants for Heavy-Duty Engines
  • D5753 – 05(2010) Standard Guide for Planning and Conducting Borehole Geophysical Logging
  • D5755 – 09(2014)e1 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading
  • D5757 – 11(2017) Standard Test Method for Determination of Attrition of FCC Catalysts by Air Jets
  • D5758 – 01(2015) Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction
  • D5759 – 12 Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses
  • D5760 – 13 Standard Specification for Performance of Manual Transmission Gear Lubricants
  • D5761 – 96(2017) Standard Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials
  • D5762 – 17 Standard Test Method for Nitrogen in Liquid Hydrocarbons, Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
  • D5763 – 11(2016) Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware
  • D5764 – 97a(2013) Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products
  • D5765 – 16 Standard Practice for Solvent Extraction of Total Petroleum Hydrocarbons from Soils and Sediments Using Closed Vessel Microwave Heating
  • D5766/D5766M – 11 Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates
  • D5767 – 17 Standard Test Method for Instrumental Measurement of Distinctness-of-Image (DOI) Gloss of Coated Surfaces
  • D5768 – 02(2014) Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids
  • D5769 – 15 Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry
  • D5770 – 11(2017) Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
  • D5771 – 17 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical Detection Stepped Cooling Method)
  • D5771-RUS – 17 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ ТЕМПЕРАТУРЫ ПОМУТНЕНИЯ НЕФТЕПРОДУКТОВ И ЖИДКИХ ТОПЛИВ (МЕТОД ОПТИЧЕСКОГО ДЕТЕКТИРОВАНИЯ ПРИ СТУПЕНЧАТОМ ОХЛАЖДЕНИИ)
  • D5772 – 17 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Linear Cooling Rate Method)
  • D5773 – 17e1 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)
  • D5774 – 95(2014) Standard Test Methods for Rubber—Chemical Analysis of Extractables
  • D5775 – 95(2014) Standard Test Method for Rubber—Determination of Bound Styrene in Styrene Butadiene Rubber by Refractive Index
  • D5776 – 14a Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration
  • D5776-RUS – 14a Стандартный метод определения бромного числа ароматических углеводородов электрометрическим титрованием
  • D5777 – 00(2011)e1 Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation
  • D5778 – 12 Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils
  • D5779/D5779M – 14 Standard Test Method for Field Determination of Apparent Specific Gravity of Rock and Manmade Materials for Erosion Control
  • D5780 – 10 Standard Test Method for Individual Piles in Permafrost Under Static Axial Compressive Load
  • D5781/D5781M – 13 Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
  • D5782 – 95(2012) Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
  • D5783 – 95(2012) Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
  • D5784/D5784M – 13 Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
  • D5785/D5785M – 15 Standard Test Method for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test)
  • D5786 – 17 Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems
  • D5787 – 14 Standard Practice for Monitoring Well Protection
  • D5788 – 95(2017) Standard Guide for Spiking Organics into Aqueous Samples
  • D5790 – 95(2012) Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry
  • D5791 – 95(2017) Standard Guide for Using Probability Sampling Methods in Studies of Indoor Air Quality in Buildings
  • D5792 – 10(2015) Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives
  • D5793 – 13 Standard Test Method for Binding Sites per Unit Length or Width of Pile Yarn Floor Coverings
  • D5794 – 95(2014) Standard Guide for Determination of Anions in Cathodic Electrocoat Permeates by Ion Chromatography
  • D5795 – 16 Standard Test Method for Determination of Liquid Water Absorption of Coated Wood and Wood Based Products Via “Cobb Ring” Apparatus
  • D5796 – 10(2015) Standard Test Method for Measurement of Dry Film Thickness of Thin-Film Coil-Coated Systems by Destructive Means Using a Boring Device
  • D5797 – 17 Standard Specification for Methanol Fuel Blends (M51–M85) for Methanol-Capable Automotive Spark-Ignition Engines
  • D5798 – 17 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
  • D5799 – 95(2014) Standard Test Method for Determination of Peroxides in Butadiene
  • D5800 – 15a Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
  • D5800-RUS – 15a Стандартный метод определения потерь на испарение смазочных масел методом Hоака
  • D5801 – 17 Standard Test Method for Toughness and Tenacity of Asphalt Materials
  • D5805 – 00(2014) Standard Test Methods for Rubber—Determination of Carbon Black in Masterbatches
  • D5806 – 95(2017) Standard Test Method for Disinfectant Quaternary Ammonium Salts by Potentiometric Titration
  • D5807 – 08(2013) Standard Practice for Evaluating the Overpressurization Characteristics of Inflatable Restraint Cushions
  • D5808 – 09a(2014) Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry
  • D5810 – 96(2015) Standard Guide for Spiking into Aqueous Samples 
  • D5811 – 08(2013) Standard Test Method for Strontium-90 in Water
  • D5813 – 04(2012) Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
  • D5814 – 10 Standard Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test
  • D5817 – 03a(2014) Standard Practice for Carbon Black, Pelleted—Reduction, Blending, and Drying of Gross Samples for Testing
  • D5818 – 11 Standard Practice for Exposure and Retrieval of Samples to Evaluate Installation Damage of Geosynthetics
  • D5819 – 05(2016) Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
  • D5820 – 95(2011) Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes
  • D5821 – 13(2017) Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
  • D5822 – 13 Standard Test Method for Determining Seam Strength in Inflatable Restraint Cushions
  • D5823 – 13 Standard Test Method for Tuft Height of Pile Floor Coverings
  • D5824 – 98(2017) Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water
  • D5827 – 09(2015) Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
  • D5828 – 97(2011)e1 Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates
  • D5830 – 14 Standard Test Method for Solvents Analysis in Hazardous Waste Using Gas Chromatography
  • D5831 – 17 Standard Practice for Screening Fuels in Soils
  • D5832 – 98(2014) Standard Test Method for Volatile Matter Content of Activated Carbon Samples
  • D5833 – 12 Standard Guide for Source Reduction Reuse, Recycling, or Disposal of Steel Cans
  • D5835 – 95(2013) Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
  • D5836 – 08(2013) Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method)
  • D5837 – 15 Standard Test Method for Furanic Compounds in Electrical Insulating Liquids by High-Performance Liquid Chromatography (HPLC)
  • D5839 – 15 Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry
  • D5842 – 17 Standard Practice for Sampling and Handling of Fuels for Volatility Measurement
  • D5843/D5843M – 95(2014)e1 Standard Guide for Application of Fully Adhered Vulcanized Rubber Sheets Used in Waterproofing
  • D5845 – 01(2016) Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
  • D5845-RUS – 01(2016) СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ МТБЭ, ЭТБЭ, ТАМЭ, ДИПЭ, МЕТАНОЛА, ЭТАНОЛА И ТРЕТ-БУТАНОЛА В БЕНЗИНЕ С ПОМОЩЬЮ ИНФРАКРАСНОЙ СПЕКТРОСКОПИИ
  • D5846 – 07(2017) Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus
  • D5847 – 02(2012) Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
  • D5848 – 10e1 Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings
  • D5849/D5849M – 07(2013)e1 Standard Test Method for Evaluating Resistance of Modified Bituminous Roofing Membrane to Cyclic Fatigue (Joint Displacement)
  • D5850 – 95(2012) Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
  • D5851 – 95(2015) Standard Guide for Planning and Implementing a Water Monitoring Program
  • D5853 – 17 Standard Test Method for Pour Point of Crude Oils
  • D5853-RUS – 17 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ ТОЧКИ ПОТЕРИ ТЕКУЧЕСТИ СЫРОЙ НЕФТИ
  • D5854 – 96(2015) Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
  • D5855/D5855M – 15 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well
  • D5856 – 15 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
  • D5857 – 17 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology
  • D5858 – 96(2015) Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory
  • D5860 – 95(2013) Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens
  • D5861 – 07(2017) Standard Guide for Significance of Particle Size Measurements of Coating Powders
  • D5863 – 00a(2016) Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
  • D5863-RUS – 00a(2016) Стандартные методы определения никеля, ванадия, железа и натрия в сырой нефти и нефтяных топливах с помощью пламенной атомно-абсорбционной спектрометрии
  • D5863-SP – 00a(2016) Métodos de prueba estándar para determinación del contenido de níquel, vanadio, hierro y sodio en petróleo crudo y combustibles residuales mediante espectrometría de absorción atómica con llama
  • D5864 – 17 Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components
  • D5865 – 13 Standard Test Method for Gross Calorific Value of Coal and Coke
  • D5865-RUS – 13 Стандартный метод определения высшей теплотворной способности каменного угля и кокса
  • D5866 – 12 Standard Test Method for Neps in Cotton Fibers
  • D5867 – 12e1 Standard Test Methods for Measurement of Physical Properties of Raw Cotton by Cotton Classification Instruments
  • D5868 – 01(2014) Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
  • D5869/D5869M – 07A(2018)e1 Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials
  • D5870 – 16 Standard Practice for Calculating Property Retention Index of Plastics
  • D5871 – 17 Standard Specification for Benzene for Cyclohexane Feedstock
  • D5872/D5872M – 13 Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
  • D5873 – 14 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method
  • D5874 – 16 Standard Test Methods for Determination of the Impact Value (IV) of a Soil
  • D5875/D5875M – 13 Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
  • D5876 – 95(2012)e1 Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
  • D5879 – 95(2010) Standard Practice for Surface Site Characterization for On-Site Septic Systems
  • D5881 – 13 Standard Test Method for (Analytical Procedure) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug)
  • D5882 – 16 Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations
  • D5882-RUS – 16 Стандартный метод испытаний фундамента глубокого заложения на целостность путем приложения ударной нагрузки малой интенсивности 1
  • D5883 – 12 Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes
  • D5884/D5884M – 04A(2015)e1 Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes
  • D5885/D5885M – 17 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry
  • D5886 – 95(2011) Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications
  • D5887/D5887M – 16 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
  • D5888 – 06(2016) Standard Guide for Storage and Handling of Geosynthetic Clay Liners
  • D5889/D5889M – 16 Standard Practice for Quality Control of Geosynthetic Clay Liners
  • D5890 – 11 Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners
  • D5890-RUS – 11 Стандартный метод определения индекса свободного набухания глинистого минерального компонента в геосинтетических глинистых прокладках (ГГП)
  • D5891/D5891M – 02(2016)e1 Standard Test Method for Fluid Loss of Clay Component of Geosynthetic Clay Liners
  • D5891/D5891M-RUS – 02(2016)e1 Стандартный метод испытаний для определения водоотдачи для компонентов глинистых пород геосинтетических бентонитовых материалов (ГБМ)
  • D5893/D5893M – 16 Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements
  • D5894 – 16 Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
  • D5895 – 13 Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders
  • D5896 – 96(2012) Standard Test Method for Carbohydrate Distribution of Cellulosic Materials
  • D5897 – 13 Standard Test Method for Determination of Percent Hydroxyl on Cellulose Esters by Potentiometric Titration—Alternative Method
  • D5898/D5898M – 96(2013) Standard Guide for Standard Details for Adhered Sheet Waterproofing
  • D5899 – 98(2013) Standard Classification System for Rubber Compounding Materials for Use in Computer Material Management Systems
  • D5900 – 17 Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)
  • D5902 – 05(2015) Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
  • D5903 – 96(2017)e1 Standard Guide for Planning and Preparing for a Groundwater Sampling Event
  • D5904 – 02(2017) Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • D5905 – 98(2013) Standard Practice for the Preparation of Substitute Wastewater
  • D5906 – 02(2013) Standard Guide for Measuring Horizontal Positioning During Measurements of Surface Water Depths
  • D5907 – 13 Standard Test Methods for Filterable Matter (Total Dissolved Solids) and Nonfilterable Matter (Total Suspended Solids) in Water
  • D5907-RUS – 13 Стандартные методы определения содержания в воде фильтруемых веществ (полностью растворимых твердых частиц) и нефильтруемых веществ (полностью взвешенных твердых частиц)
  • D5909 – 96a(2011) Standard Test Method for Drying Time of Oxidative-Drying Printing Inks by Squalene Resistance
  • D5910 – 05(2012) Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography
  • D5911/D5911M – 96(2010)e1 Standard Practice for Minimum Set of Data Elements to Identify a Soil Sampling Site
  • D5913 – 96(2013) Standard Test Method for Evaluation of Cleanability of Paint Brushes
  • D5917 – 15e1 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration
  • D5917-RUS – 15e1 Стандартный метод определения микропримесей в моноциклических ароматических углеводородах с помощью газовой хроматографии и внешней калибровки
  • D5918 – 13 Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils
  • D5919 – 96(2017) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations
  • D5920 – 14 Standard Test Method [Analytical Procedure] for Tests of Anisotropic Unconfined Aquifers by Neuman Method
  • D5921 – 96(2010) Standard Practice for Subsurface Site Characterization of Test Pits for On-Site Septic Systems
  • D5922 – 96(2010) Standard Guide for Analysis of Spatial Variation in Geostatistical Site Investigations
  • D5923 – 96(2010) Standard Guide for Selection of Kriging Methods in Geostatistical Site Investigations
  • D5923-RUS – 96(2010) Стандартное руководство по выбору методов кригинга в геостатистических инженерных изысканиях
  • D5924 – 96(2010) Standard Guide for Selection of Simulation Approaches in Geostatistical Site Investigations
  • D5926 – 15 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
  • D5927 – 17 Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods
  • D5928 – 18 Standard Practice for Screening of Waste for Radioactivity
  • D5929 – 96(2009) Standard Test Method for Determining Biodegradability of Materials Exposed to Municipal Solid Waste Composting Conditions by Compost Respirometry
  • D5930 – 17 Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique
  • D5931 – 13(2017) Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
  • D5932 – 08(2013)e1 Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace
  • D5933 – 96(2013) Standard Specification for 2 5/8-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions
  • D5946 – 17 Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements
  • D5947 – 11 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
  • D5948 – 05(2012) Standard Specification for Molding Compounds, Thermosetting
  • D5949 – 16 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)
  • D5949-RUS – 16 Стандартный метод определения температуры потери текучести нефтепродуктов (автоматический метод импульсных колебаний давления
  • D5950 – 14 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
  • D5950-RUS – 14 Стандартный метод определения температуры потери текучести нефтепродуктов с помощью автоматического наклона пробы
  • D5952 – 08(2015) Standard Guide for the Inspection of Water Systems for Legionella and the Investigation of Possible Outbreaks of Legionellosis (Legionnaires’ Disease or Pontiac Fever)
  • D5953M – 16 Standard Test Method for Determination of Non-methane Organic Compounds (NMOC) in Ambient Air Using Cryogenic Preconcentration and Direct Flame Ionization Detection
  • D5954 – 98(2014)e1 Standard Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy
  • D5955 – 02(2017)e1 Standard Test Methods for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on UVPM and FPM
  • D5956 – 15 Standard Guide for Sampling Strategies for Heterogeneous Wastes
  • D5957 – 98(2013) Standard Guide for Flood Testing Horizontal Waterproofing Installations
  • D5958 – 99(2012)e1 Standard Practices for Preparation of Oil-Based Ink Resin Solutions
  • D5959 – 12(2017) Standard Test Method for Bulk Density of Level Paintbrush Filaments
  • D5960 – 03(2013) Standard Specification for Technical Grade Ethylene Dichloride
  • D5961/D5961M – 17 Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates
  • D5963 – 04(2015) Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)
  • D5964 – 16 Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, ASTM No. 3 Oils, and IRM 905 formerly ASTM No. 5 Oil
  • D5965 – 02(2013) Standard Test Methods for Specific Gravity of Coating Powders
  • D5966 – 13 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine
  • D5967 – 17 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
  • D5968 – 17 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121 °C
  • D5969 – 11(2016) Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
  • D5970/D5970M – 16 Standard Test Method for Deterioration of Geotextiles from Outdoor Exposure
  • D5971/D5971M – 16 Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material
  • D5972 – 16 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
  • D5972-RUS – 16 Стандартный метод определения температуры замерзания авиационного топлива (автоматический метод фазового перехода)
  • D5973 – 97(2017) Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing
  • D5974 – 15 Standard Test Methods for Fatty and Rosin Acids in Tall Oil Fractionation Products by Capillary Gas Chromatography
  • D5975 – 17 Standard Test Method for Determining the Stability of Compost by Measuring Oxygen Consumption
  • D5977 – 15 Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures
  • D5978/D5978M – 16 Standard Guide for Maintenance and Rehabilitation of Groundwater Monitoring Wells
  • D5979 – 96(2014) Standard Guide for Conceptualization and Characterization of Groundwater Systems
  • D5980 – 16 Standard Guide for Selection and Documentation of Existing Wells for Use in Environmental Site Characterization and Monitoring
  • D5982 – 15 Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)
  • D5983 – 17 Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel
  • D5984 – 11(2017) Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration
  • D5985 – 02(2014) Standard Test Method for Pour Point of Petroleum Products (Rotational Method)
  • D5986 – 96(2015) Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8–C 12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy
  • D5987 – 96(2015) Standard Test Method for Total Fluorine in Coal and Coke by Pyrohydrolytic Extraction and Ion Selective Electrode or Ion Chromatograph Methods
  • D5988 – 12 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in Soil
  • D5989 – 14a Standard Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA)
  • D5991 – 17 Standard Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake
  • D5992 – 96(2011) Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods
  • D5992-RUS – 96(2011) Стандартное руководство по динамическим испытаниям вулканизированной резины и резиноподобных материалов с помощью вибрационных методов
  • D5993 – 14 Standard Test Method for Measuring Mass Per Unit of Geosynthetic Clay Liners
  • D5994/D5994M – 10(2015)e1 Standard Test Method for Measuring Core Thickness of Textured Geomembranes
  • D5995 – 98(2010) Standard Guide for Environmental Site Characterization in Cold Regions
  • D5996 – 16 Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography
  • D5997 – 15 Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • D5998 – 16 Standard Specification for Molded Polyethylene Shipping and Storage Drums
  • D6000/D6000M – 15e1 Standard Guide for Presentation of Water-Level Information from Groundwater Sites
  • D6001 – 05(2012) Standard Guide for Direct-Push Groundwater Sampling for Environmental Site Characterization
  • D6004 – 04(2011) Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives
  • D6006 – 17 Standard Guide for Assessing Biodegradability of Hydraulic Fluids
  • D6007 – 14 Standard Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber
  • D6008 – 96(2014) Standard Practice for Conducting Environmental Baseline Surveys
  • D6009 – 12 Standard Guide for Sampling Waste Piles
  • D6011 – 96(2015) Standard Test Method for Determining the Performance of a Sonic Anemometer/Thermometer
  • D6012 – 03(2013) Standard Test Method for Determination of Resistance of Leather to (Bleeding) Color Stain Transfer
  • D6013 – 00(2010) Standard Test Method for Determination of Area Stability of Leather to Laundering
  • D6014 – 00(2015) Standard Test Method for Determination of Dynamic Water Absorption of Leather Surfaces
  • D6015 – 14 Standard Test Method for Static Water Absorption of Leather
  • D6016 – 17 Standard Test Method for Determination of Nitrogen, Water Extractable in Leather
  • D6017 – 97(2015) Standard Test Method for Determination of Magnesium Sulfate (Epsom Salt) in Leather
  • D6019 – 15 Test Method for Determination of Chromic Oxide in Basic Chromium Tanning Liquors (Ammonium Persulfate Oxidation)
  • D6020 – 00(2016) Standard Practice for Calculation of (Non-Mineral) Combined Tanning Agents and Degree of Tannage
  • D6021 – 12(2017) Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
  • D6022 – 06(2012) Standard Practice for Calculation of Permanent Shear Stability Index
  • D6023 – 16 Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)
  • D6024/D6024M – 16 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application
  • D6026 – 13 Standard Practice for Using Significant Digits in Geotechnical Data
  • D6027/D6027M – 15 Standard Practice for Calibrating Linear Displacement Transducers for Geotechnical Purposes
  • D6028 – 17 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method
  • D6029 – 17 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method
  • D6030 – 15 Standard Guide for Selection of Methods for Assessing Groundwater or Aquifer Sensitivity and Vulnerability
  • D6031/D6031M – 96(2015) Standard Test Method for Logging In Situ Moisture Content and Density of Soil and Rock by the Nuclear Method in Horizontal, Slanted, and Vertical Access Tubes
  • D6032/D6032M – 17 Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core
  • D6033 – 16 Standard Guide for Describing the Functionality of a Groundwater Modeling Code
  • D6034 – 17 Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test
  • D6035/D6035M – 13 Standard Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Intact Soil Specimens Using a Flexible Wall Permeameter
  • D6036 – 96(2014) Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements—Use of Maps
  • D6037 – 13e1 Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings
  • D6038 – 14 Standard Test Methods for Determining the Compatibility of Resin/Solvent Mixtures by Precipitation Temperature (Cloud Point)
  • D6039/D6039M – 11 Standard Specification for Open and Covered Wood Crates
  • D6040 – 12 Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape
  • D6041 – 11 Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings
  • D6042 – 09(2016) Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)
  • D6044 – 96(2015) Standard Guide for Representative Sampling for Management of Waste and Contaminated Media
  • D6045 – 12(2017) Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
  • D6045-RUS – 12(2017) СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ ЦВЕТА НЕФТЕПРОДУКТОВ АВТОМАТИЧЕСКИМ ТРЕХЦВЕТНЫМ МЕТОДОМ
  • D6046 – 17 Standard Classification of Hydraulic Fluids for Environmental Impact
  • D6047 – 17 Standard Test Methods for Rubber, Raw—Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers
  • D6048 – 07(2012) Standard Practice for Stress Relaxation Testing of Raw Rubber, Unvulcanized Rubber Compounds, and Thermoplastic Elastomers
  • D6049 – 03(2017) Standard Test Method for Rubber Property—Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates
  • D6050 – 09(2016) Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
  • D6051 – 15 Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities
  • D6052 – 97(2016) Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
  • D6053 – 14 Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes
  • D6055 – 96(2014) Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates
  • D6056 – 96(2011) Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy
  • D6057 – 96(2011) Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy
  • D6058 – 96(2016) Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
  • D6059 – 96(2011) Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy
  • D6060 – 17 Standard Test Method for Sampling of Process Vents with a Portable Gas Chromatograph
  • D6061 – 01(2012)e1 Standard Practice for Evaluating the Performance of Respirable Aerosol Samplers
  • D6062 – 07(2012) Standard Guide for Personal Samplers of Health-Related Aerosol Fractions
  • D6063 – 11 Standard Guide for Sampling of Drums and Similar Containers by Field Personnel
  • D6064 – 11(2015) Standard Specification for HFC-227ea, 1,1,1,2,3,3,3-Heptafluoropropane (CF3CHFCF3)
  • D6065 – 11(2015) Standard Practice for Handling, Transportation, and Storage of HFC-227ea 1,1,1,2,3,3,3-Heptafluoropropane (CF3CHFCF3)
  • D6066 – 11 Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential
  • D6067 – 10 Standard Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization
  • D6068 – 10 Standard Test Method for Determining J-R Curves of Plastic Materials
  • D6071 – 14 Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
  • D6071-RUS – 14 Стандартный метод определения низкого содержания натрия в воде высшей степени очистки с помощью атомно-абсорбционной спектроскопии с графитовой печью
  • D6072/D6072M – 09(2015) Standard Practice for Obtaining Samples of Geosynthetic Clay Liners
  • D6073 – 08a(2013) Standard Test Method for Relative Setting of Heatset Printing Inks
  • D6074 – 15 Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils
  • D6075 – 13 Standard Test Method for Cracking Resistance of Leather
  • D6076 – 08(2013) Standard Test Method for Shrinkage Temperature of Leather
  • D6077 – 16 Standard Test Method for Trapezoid Tearing Strength of Leather
  • D6078 – 04(2016) Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE)
  • D6079 – 11(2016) Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
  • D6079-RUS – 11(2016) Стандартный метод оценки смазывающей способности дизельных топлив на установке с высокочастотным возвратно- поступательным движением
  • D6079-SP – 11(2016) Método de prueba estándar para evaluación de la lubricidad de los combustibles diésel mediante dispositivo de oscilación de alta frecuencia (HFRR)
  • D6080 – 12a Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids
  • D6081 – 98(2014) Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation
  • D6082 – 12(2017) Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils
  • D6082-RUS – 12(2017) МЕТОД ОПРЕДЕЛЕНИЯ ХАРАКТЕРИСТИК ВЫСОКОТЕМПЕРАТУРНОГО ПЕНООБРАЗОВАНИЯ СМАЗОЧНЫХ МАСЕЛ
  • D6084/D6084M – 13 Standard Test Method for Elastic Recovery of Bituminous Materials by Ductilometer
  • D6084/D6084M-RUS – 13 Стандартный метод определения упругого восстановления битумных материалов с помощью дуктилометра
  • D6085 – 97(2016) Standard Practice for Sampling in Rubber Testing—Terminology and Basic Concepts
  • D6087 – 08(2015)e1 Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar
  • D6088 – 06(2016) Standard Practice for Installation of Geocomposite Pavement Drains
  • D6089 – 15 Standard Guide for Documenting a Groundwater Sampling Event
  • D6090 – 17 Standard Test Method for Softening Point Resins (Mettler Cup and Ball Method)
  • D6091 – 07(2014) Standard Practice for 99 %/95 % Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error
  • D6092 – 14 Standard Practice for Specifying Standard Sizes of Stone for Erosion Control
  • D6093 – 97(2016) Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
  • D6095 – 12 Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
  • D6096 – 11(2016) Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 90°C Operation
  • D6097 – 16 Standard Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials
  • D6098 – 16 Standard Classification System and Basis for Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)
  • D6099 – 13 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates
  • D6100 – 17 Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)
  • D6102 – 15 Standard Guide for Installation of Geosynthetic Clay Liners
  • D6103/D6103M – 17 Standard Test Method for Flow Consistency of Controlled Low Strength Material (CLSM)
  • D6104 – 97(2017)e1 Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off
  • D6105 – 04(2012) Standard Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics for Adhesive Bonding
  • D6106 – 97(2010) Standard Guide for Establishing Nomenclature of Groundwater Aquifers
  • D6107 – 97(2017) Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service
  • D6108 – 13 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes
  • D6109 – 13 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products
  • D6110 – 17 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
  • D6111 – 13a Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
  • D6112 – 13 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
  • D6113 – 16 Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
  • D6115 – 97(2011) Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites
  • D6116 – 00(2016) Standard Test Method for Blocking
  • D6117 – 16 Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes
  • D6119 – 12 Standard Practice for Creating Surface Appearance Changes in Pile Yarn Floor Covering from Foot Traffic
  • D6120 – 97(2017)e1 Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature
  • D6121 – 17 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
  • D6122 – 15 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
  • D6123/D6123M – 97(2012) Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking
  • D6124 – 06(2017) Standard Test Method for Residual Powder on Medical Gloves
  • D6126/D6126M – 11(2015) Standard Specification for HFC-23 (Trifluoromethane, CHF3)
  • D6127 – 11(2015) Standard Practice for Handling, Transportation, and Storage of HFC-23 (Trifluoromethane, CHF3)
  • D6128 – 16 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Tester
  • D6129 – 97(2015) Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy
  • D6130 – 11 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
  • D6130-RUS – 11 Стандартный метод определения содержания кремния и других элементов в охлаждающей жидкости для двигателей с помощью атомно-эмиссионной спектрометрии с индуктивно связанной плазмой
  • D6131 – 17 Standard Test Method for Evaluating the Relative Tint Undertone of Titanium Dioxide Pigments
  • D6132 – 13(2017) Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
  • D6133 – 02(2014) Standard Test Method for Acetone, p-Chlorobenzotrifluoride, Methyl Acetate or t-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph
  • D6134 – 07(2013) Standard Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems
  • D6136/D6136M – 15 Standard Test Method for Kerosine Number of Unsaturated (Dry) Felt by Vacuum Method
  • D6137 – 97(2012) Standard Test Method for Sulfuric Acid Resistance of Polymer Linings for Flue Gas Desulfurization Systems
  • D6138 – 16 Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)
  • D6139 – 17 Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask
  • D6140 – 00(2014) Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications
  • D6141 – 14 Standard Guide for Screening Clay Portion and Index Flux of Geosynthetic Clay Liner (GCL) for Chemical Compatibility to Liquids
  • D6142 – 16 Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography
  • D6143 – 13 Standard Test Method for Iron Content of Bisphenol A (4,4′ – Isopropylidenediphenol)
  • D6144 – 17 Standard Test Method for Analysis of AMS (α-Methylstyrene) by Capillary Gas Chromatography
  • D6145 – 97(2012) Standard Guide for Monitoring Sediment in Watersheds
  • D6146 – 97(2012) Standard Guide for Monitoring Aqueous Nutrients in Watersheds
  • D6147 – 97(2014) Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer—Determination of Force Decay (Stress Relaxation) in Compression
  • D6150 – 16 Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility
  • D6151/D6151M – 15 Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling
  • D6152/D6152M – 12 Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing
  • D6153 – 15 Standard Specification for Materials for Bridge Deck Waterproofing Membrane Systems
  • D6154 – 15 Standard Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction
  • D6155 – 15 Standard Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures
  • D6157 – 97(2017)e1 Standard Practice for Determining the Performance of Oil/Water Separators Subjected to a Sudden Release
  • D6158 – 16 Standard Specification for Mineral Hydraulic Oils
  • D6159 – 17 Standard Test Method for Determination of Hydrocarbon Impurities in Ethylene by Gas Chromatography
  • D6160 – 98(2017) Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography
  • D6161 – 10 Standard Terminology Used for Microfiltration, Ultrafiltration, Nanofiltration and Reverse Osmosis Membrane Processes
  • D6162/D6162M – 16 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
  • D6163/D6163M – 16 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements
  • D6164/D6164M – 16 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
  • D6166 – 12(2016) Standard Test Method for Color of Pine Chemicals and Related Products (Instrumental Determination of Gardner Color)
  • D6167 – 11 Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper
  • D6168 – 97(2010) Standard Guide for Selection of Minimum Set of Data Elements Required to Identify Locations Chosen for Field Collection of Information to Describe Soil, Rock, and Their Contained Fluids
  • D6169/D6169M – 13 Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations
  • D6170 – 17 Standard Guide for Selecting a Groundwater Modeling Code
  • D6171 – 97(2010) Standard Guide for Documenting a Groundwater Modeling Code
  • D6172 – 98(2010) Standard Test Method for Determining the Volume of Bulk Materials Using Contours or Cross Sections Created by Direct Operator Compilation Using Photogrammetric Procedures
  • D6173 – 97(2014) Standard Test Method for Determination of Various Anionic Surfactant Actives by Potentiometric Titration
  • D6175 – 03(2013) Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
  • D6176 – 97(2015) Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors
  • D6177 – 14 Standard Practice for Determining Emission Profiles of Volatile Organic Chemicals Emitted from Bedding Sets
  • D6178 – 14 Standard Practice for Estimation of Short-term Inhalation Exposure to Volatile Organic Chemicals Emitted from Bedding Sets
  • D6179 – 07(2014) Standard Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates
  • D6182 – 00(2015) Standard Test Method for Flexibility and Adhesion of Finish on Leather
  • D6183 – 00(2015) Standard Test Method for Tackiness of Finish on Leather
  • D6184 – 17 Standard Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)
  • D6185 – 11 Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases
  • D6186 – 08(2013) Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)
  • D6186-RUS – 08(2013) СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ ИНДУКЦИОННОГО ПЕРИОДА ОКИСЛЕНИЯ СМАЗОЧНЫХ МАСЕЛ С ПОМОЩЬЮ ДИФФЕРЕНЦИАЛЬНОЙ СКАНИРУЮЩЕЙ КАЛОРИМЕТРИИ ПОД ДАВЛЕНИЕМ (ДСКД)
  • D6187 – 97(2010) Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence
  • D6188 – 17 Standard Test Method for Viscosity of Cellulose by Cuprammonium Ball Fall
  • D6189 – 97(2014) Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings
  • D6191 – 97(2014) Standard Test Method for Measurement of Evolved Formaldehyde from Water Reducible Air-Dry Coatings
  • D6192 – 11 Standard Tables of Body Measurements for Girls, Sizes 2 to 20 (Reg & Slim) and Girls Plus
  • D6193 – 16 Standard Practice for Stitches and Seams
  • D6194 – 14 Standard Test Method for Glow-Wire Ignition of Materials
  • D6195 – 03(2011) Standard Test Methods for Loop Tack
  • D6196 – 15 Standard Practice for Choosing Sorbents, Sampling Parameters and Thermal Desorption Analytical Conditions for Monitoring Volatile Organic Chemicals in Air
  • D6197 – 99(2017) Standard Test Method for Classifying and Counting Faults in Spun Yarns in Electronic Tests
  • D6198 – 12 Standard Guide for Transport Packaging Design
  • D6199 – 07(2012) Standard Practice for Quality of Wood Members of Containers and Pallets
  • D6200 – 01(2017) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
  • D6201 – 04(2014) Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
  • D6203 – 06(2012) Standard Test Method for Thermal Stability of Way Lubricants
  • D6204 – 15 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
  • D6204-RUS – 15 Стандартный метод испытаний резины — Измерение реологических свойств невулканизированной резины с помощью безроторных сдвиговых реометров
  • D6205 – 12 Standard Practice for Calibration of the James Static Coefficient of Friction Machine
  • D6206 – 09(2015) Standard Practice for Sampling of Coating Films
  • D6207 – 03(2015) Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
  • D6208 – 07(2014) Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement
  • D6209 – 13 Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis)
  • D6210 – 17 Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines
  • D6213 – 17 Standard Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids
  • D6214/D6214M – 98(2013)e1 Standard Test Method for Determining the Integrity of Field Seams Used in Joining Geomembranes by Chemical Fusion Methods
  • D6216 – 12 Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications
  • D6217 – 11(2016) Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
  • D6217-RUS – 11(2016) Стандартный метод определения загрязненности среднедистиллятного топлива твердыми частицами с помощью лабораторной фильтрации
  • D6221/D6221M – 00(2014)e1 Standard Specification for Reinforced Bituminous Flashing Sheets for Roofing and Waterproofing
  • D6222/D6222M – 16 Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements
  • D6223/D6223M – 16 Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
  • D6224 – 16 Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment
  • D6225/D6225M – 98(2012)e1 Standard Test Method for Granule Cover of Mineral Surfaced Roofing
  • D6226 – 15 Standard Test Method for Open Cell Content of Rigid Cellular Plastics
  • D6227 – 17 Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component
  • D6228 – 10 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection
  • D6229 – 06(2010) Standard Test Method for Trace Benzene in Hydrocarbon Solvents by Capillary Gas Chromatography
  • D6230 – 13 Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
  • D6231 – 11(2015) Standard Specification for HFC-125 (Pentafluoroethane, C2HF5)
  • D6232 – 16 Standard Guide for Selection of Sampling Equipment for Waste and Contaminated Media Data Collection Activities
  • D6234 – 13 Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure
  • D6235 – 04(2010) Standard Practice for Expedited Site Characterization of Vadose Zone and Groundwater Contamination at Hazardous Waste Contaminated Sites
  • D6236 – 11 Standard Guide for Coring and Logging Cement – or Lime-Stabilized Soil
  • D6237 – 09(2015) Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)
  • D6238 – 98(2017) Standard Test Method for Total Oxygen Demand in Water
  • D6239 – 09(2015) Standard Test Method for Uranium in Drinking Water by High-Resolution Alpha-Liquid-Scintillation Spectrometry
  • D6240/D6240M – 12e1 Standard Tables of Body Measurements for Mature Men, ages 35 and older, Sizes Thirty-Four to Fifty-Two (34 to 52) Short, Regular, and Tall
  • D6241 – 14 Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
  • D6243/D6243M – 16 Standard Test Method for Determining the Internal and Interface Shear Strength of Geosynthetic Clay Liner by the Direct Shear Method
  • D6244 – 06(2011) Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains
  • D6245 – 12 Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation
  • D6246 – 08(2013)e1 Standard Practice for Evaluating the Performance of Diffusive Samplers
  • D6247 – 10 Standard Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry
  • D6248 – 98(2012)e1 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
  • D6249 – 06(2011) Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals
  • D6251/D6251M – 11 Standard Specification for Wood-Cleated Panelboard Shipping Boxes
  • D6252/D6252M – 98(2011) Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle
  • D6253 – 16 Standard Practice for Treatment and/or Marking of Wood Packaging Materials
  • D6254/D6254M – 13 Standard Specification for Wirebound Pallet-Type Wood Boxes
  • D6255/D6255M – 05(2011) Standard Specification for Steel or Aluminum Slotted Angle Crates
  • D6256/D6256M – 16 Standard Specification for Wood-Cleated Shipping Boxes with Skidded, Load-Bearing Bases
  • D6258 – 17 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
  • D6259 – 15 Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method
  • D6259-RUS – 15 Стандартная методика определения совокупного предела количественного метода анализа
  • D6261 – 14 Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)
  • D6262 – 12 Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)
  • D6263 – 15 Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)
  • D6264/D6264M – 17 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
  • D6265 – 17 Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test
  • D6266 – 00a(2017) Standard Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
  • D6267/D6267M – 13(2017) Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures
  • D6268 – 15 Standard Practice for Handling, Transportation, and Storage of HFC-125, Pentafluoroethane (C2HF5)
  • D6270 – 17 Standard Practice for Use of Scrap Tires in Civil Engineering Applications
  • D6271 – 10(2016) Standard Test Method for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on Solanesol
  • D6272 – 17 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
  • D6273 – 14 Standard Test Methods for Natural Gas Odor Intensity
  • D6274 – 10 Standard Guide for Conducting Borehole Geophysical Logging – Gamma
  • D6277 – 07(2017) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • D6278 – 17e1 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus
  • D6278-RUS – 17e1 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ СОПРОТИВЛЕНИЯ СДВИГУ ПОЛИМЕРОСОДЕРЖАЩИХ ЖИДКОСТЕЙ С ПОМОЩЬЮ ЕВРОПЕЙСКОЙ ДИЗЕЛЬНОЙ ИНЖЕКЦИОННОЙ УСТАНОВКИ
  • D6279 – 15 Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings
  • D6280 – 98(2014) Standard Specification for Zinc Phosphate Pigments
  • D6281 – 15 Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)
  • D6282/D6282M – 14 Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations
  • D6283 – 12 Standard Test Method for Tuft Element Length of Uncoated Pile Yarn Floor Coverings
  • D6284 – 17 Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine
  • D6285 – 99(2016) Standard Guide for Locating Abandoned Wells
  • D6286 – 12 Standard Guide for Selection of Drilling Methods for Environmental Site Characterization
  • D6287 – 09 Standard Practice for Cutting Film and Sheeting Test Specimens
  • D6288 – 17 Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing
  • D6289 – 13 Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
  • D6290 – 13 Standard Test Method for Color Determination of Plastic Pellets
  • D6294/D6294M – 13 Standard Test Method for Corrosion Resistance of Ferrous Metal Fastener Assemblies Used in Roofing and Waterproofing
  • D6295/D6295M – 98(2011) Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape
  • D6296 – 98(2017) Standard Test Method for Total Olefins in Spark-ignition Engine Fuels by Multidimensional Gas Chromatography
  • D6297 – 13 Standard Specification for Asphaltic Plug Joints for Bridges
  • D6298/D6298M – 16 Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface
  • D6299 – 17a Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
  • D6300 – 17a Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
  • D6300-RUS – 17a СТАНДАРТНАЯ МЕТОДИКА ОПРЕДЕЛЕНИЯ ДАННЫХ ПО ПРЕЦИЗИОННОСТИ И СИСТЕМАТИЧЕСКОЙ ПОГРЕШНОСТИ ДЛЯ ИСПОЛЬЗОВАНИЯ В МЕТОДАХ ИСПЫТАНИЙ НЕФТЕПРОДУКТОВ И СМАЗОЧНЫХ МАТЕРИАЛОВ
  • D6301 – 13 Standard Practice for Collection of On-Line Composite Samples of Suspended Solids and Ionic Solids in Process Water
  • D6302 – 98(2017) Standard Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins
  • D6304 – 16e1 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
  • D6304-RUS – 16e1 Стандартный метод определения содержания воды в нефтепродуктах, смазочных маслах и присадках с помощью кулонометрического титрования по методу Карла Фишера
  • D6304-SP – 16e1 Método de prueba estándar para determinación del contenido de agua en productos derivados del petróleo, aceites lubricantes y aditivos mediante titulación culombimétrica de Karl Fischer
  • D6305 – 08(2015)e1 Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing
  • D6306 – 17 Standard Guide for Placement and Use of Diffusive Samplers for Gaseous Pollutants in Indoor Air
  • D6307 – 16 Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method
  • D6311 – 98(2014) Standard Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design
  • D6312 – 17 Standard Guide for Developing Appropriate Statistical Approaches for Groundwater Detection Monitoring Programs at Waste Disposal Facilities
  • D6316 – 17 Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke
  • D6317 – 15 Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • D6318 – 03(2014) Standard Practice for Calibrating a Fathometer Using a Bar Check Method
  • D6319 – 10(2015) Standard Specification for Nitrile Examination Gloves for Medical Application
  • D6319-SP – 10(2015) Guantes de Nitrilo para Reconocimiento Médico
  • D6320/D6320M – 10(2014) Standard Test Methods for Single Filament Hose Reinforcing Wire Made from Steel
  • D6321/D6321M – 14 Standard Practice for the Evaluation of Machine Washable T-Shirts
  • D6322 – 15 Standard Guide to International Test Methods Associated with Textile Care Procedures
  • D6323 – 12e1 Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities
  • D6324 – 11(2017) Standard Specification for Male Condoms Made from Polyurethane
  • D6325 – 98(2011) Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives
  • D6326 – 08(2014) Standard Practice for The Selection of Maximum Transit-Rate Ratios and Depths for the U.S. Series of Isokinetic Suspended-Sediment Samplers
  • D6327 – 10(2016) Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter
  • D6328 – 12 Standard Guide for Quality Assurance Protocols for Chemical Analysis of Atmospheric Wet Deposition
  • D6329 – 98(2015) Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers
  • D6330 – 98(2014) Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions
  • D6331 – 16 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)
  • D6332 – 12(2017) Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors
  • D6333 – 17 Standard Practice for Collection of Dislodgeable Pesticide Residues from Floors
  • D6334 – 12(2017) Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence
  • D6335 – 16 Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test
  • D6335-RUS – 16 СТАНДАРТНЫЙ МЕТОД ИСПЫТАНИЙ ДЛЯ ОПРЕДЕЛЕНИЯ ВЫСОКОТЕМПЕРАТУРНЫХ ОТЛОЖЕНИЙ С ПОМОЩЬЮ ИМИТАЦИИ ТЕРМООКИСЛЕНИЯ МОТОРНОГО МАСЛА
  • D6336 – 11(2017) Standard Practice for Evaluation of Flushing Vehicles for Pigment Wetting Using a Vacuum Modified Sigma Blade Mixer
  • D6337 – 98(2013) Standard Practice for Physical Characterization of Woven Paint Applicator Fabrics
  • D6338 – 17 Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM Standard Test Methods
  • D6339 – 11 Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS)
  • D6341 – 16 Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between –30 and 140°F (–34.4 and 60°C)
  • D6342 – 12(2017)e1 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
  • D6343 – 14 Standard Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications
  • D6344 – 04(2017) Standard Test Method for Concentrated Impacts to Transport Packages
  • D6345 – 10 Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air
  • D6346 – 17 Standard Guide for Accepting, Segregating, and Packaging Materials Collected Through Household Hazardous Waste Programs
  • D6347/D6347M – 05(2010) Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods
  • D6347/D6347M-RUS – 05(2010) Стандартный метод определения объемной плотности угля с помощью ядерного скважинного плотномера
  • D6348 – 12e1 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
  • D6349 – 13 Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry
  • D6350 – 14 Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy
  • D6351 – 10(2016) Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
  • D6352 – 15 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 °C to 700 °C by Gas Chromatography
  • D6352-RUS – 15 Стандартный метод определения распределения нефтяных дистиллятов по интервалу точек кипения в температурном диапазоне от 174°C до 700°C с помощью газовой хроматографии
  • D6353 – 06(2017)e1 Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production
  • D6354 – 12(2017) Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production
  • D6355 – 07(2017) Standard Test Method for Human Repeat Insult Patch Testing of Medical Gloves
  • D6356/D6356M – 98(2011)e1 Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing
  • D6357 – 11 Test Methods for Determination of Trace Elements in Coal, Coke, & Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission, Inductively Coupled Plasma Mass, & Graphite Furnace Atomic Absorption Spectrometry
  • D6357-RUS – 11 Стандартные методы определения содержания микроэлементов в угле, коксе и остатках от их сжигания с использованием атомно-эмиссионной спектрометрии с индуктивно связанной плазмой, масс-спектрометрии с индуктивно связанной плазмой и атомно-абсорбционной спектрометрии с графитовой печью
  • D6358 – 11 Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ISO Methods
  • D6360 – 15 Standard Practice for Enclosed Carbon-Arc Exposures of Plastics
  • D6361/D6361M – 98(2015) Standard Guide for Selecting Cleaning Agents and Processes
  • D6362 – 98(2013) Standard Practice for Certificates of Reference Materials for Water Analysis
  • D6363 – 98(2013) Standard Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method
  • D6364 – 06(2011) Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics
  • D6365 – 99(2011) Standard Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Test
  • D6367 – 17 Standard Specification for AMS (α-Methylstyrene)
  • D6368 – 06(2012) Standard Specification for Vapor-Degreasing Solvents Based on normal-Propyl Bromide and Technical Grade normal-Propyl Bromide
  • D6370 – 99(2014) Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA)
  • D6371 – 17a Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
  • D6371-SP – 17a Método de prueba estándar para detección del punto de obstrucción del filtro en frío de combustibles diésel y para calefacción
  • D6372 – 15 Standard Practice for Design, Testing, and Construction of Microsurfacing
  • D6373 – 16 Standard Specification for Performance Graded Asphalt Binder
  • D6374 – 12(2017)e1 Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure
  • D6375 – 09(2014) Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
  • D6376 – 10(2017)e1 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-ray Fluorescence Spectroscopy
  • D6377 – 16 Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx (Expansion Method)
  • D6377-RUS – 16 Стандартный метод определения давления паров сырой нефти: показатель VPCRx (метод расширения)
  • D6378 – 10(2016) Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)
  • D6379 – 11 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
  • D6379-RUS – 11 Стандартный метод определения содержания различных типов ароматических углеводородов в авиационных топливах и нефтяных дистиллятах с помощью высокоэффективной жидкостной хроматографии и измерения показателя преломления
  • D6380/D6380M – 03(2013)e1 Standard Specification for Asphalt Roll Roofing (Organic Felt)
  • D6381/D6381M – 15 Standard Test Method for Measurement of Asphalt Shingle Mechanical Uplift Resistance
  • D6382/D6382M – 99(2017) Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material
  • D6383/D6383M – 99(2015) Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material
  • D6384 – 17 Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants
  • D6385 – 99(2017) Standard Test Method for Determining Acid-Extractable Content in Activated Carbon by Ashing
  • D6386 – 16a Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting
  • D6387 – 99(2014)e1 Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography
  • D6388 – 99(2012) Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids
  • D6389 – 17 Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids
  • D6390 – 11(2017) Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures
  • D6391 – 11 Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration
  • D6392 – 12 Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods
  • D6393 – 14 Standard Test Method for Bulk Solids Characterization by Carr Indices
  • D6394 – 14 Standard Specification for Sulfone Plastics (SP)
  • D6395 – 11 Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics
  • D6396 – 99(2012) Standard Test Method for Testing of Pipe Thread Sealants on Pipe Tees
  • D6398 – 08(2014) Standard Practice to Enhance Identification of Drug Names on Labels
  • D6399 – 10 Standard Guide for Selecting Instruments and Methods for Measuring Air Quality In Aircraft Cabins
  • D6400 – 12 Standard Specification for Labeling of Plastics Designed to be Aerobically Composted in Municipal or Industrial Facilities
  • D6401 – 99(2016) Standard Test Method for Determining Non-Tannins and Tannin in Extracts of Vegetable Tanning Materials
  • D6402 – 99(2014) Standard Test Method for Determining Soluble Solids and Insolubles in Extracts of Vegetable Tanning Materials
  • D6403 – 99(2014) Standard Test Method for Determining Moisture in Raw and Spent Materials
  • D6404 – 99(2014) Standard Practice for Sampling Vegetable Materials Containing Tannin
  • D6405 – 99(2014) Standard Practice for Extraction of Tannins from Raw and Spent Materials
  • D6406 – 99(2014) Standard Test Method for Analysis of Sugar in Vegetable Tanning Materials
  • D6407 – 99(2014) Standard Test Method for Analysis of Iron and Copper in Vegetable Tanning Materials
  • D6408 – 99(2014) Standard Test Method for Analysis of Tannery Liquors
  • D6409 – 99(2014) Standard Practice for Color Tests with Sheepskin Skiver
  • D6410 – 99(2014) Standard Test Method for Determining Acidity of Vegetable Tanning Liquors
  • D6411/D6411M – 99(2012) Standard Specification For Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials
  • D6412/D6412M – 99(2012) Standard Specification For Epoxy (Flexible) Adhesive For Bonding Metallic And Nonmetallic Materials
  • D6413/D6413M – 15 Standard Test Method for Flame Resistance of Textiles (Vertical Test)
  • D6414 – 14 Standard Test Methods for Total Mercury in Coal and Coal Combustion Residues by Acid Extraction or Wet Oxidation/Cold Vapor Atomic Absorption
  • D6415/D6415M – 06a(2013) Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
  • D6416/D6416M – 16 Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
  • D6417 – 15 Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography
  • D6419 – 00(2017) Standard Test Method for Volatile Content of Sheet-Fed and Coldset Web Offset Printing Inks
  • D6420 – 99(2010) Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
  • D6421 – 99a(2014) Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure
  • D6423 – 14 Standard Test Method for Determination of pHe of Denatured Fuel Ethanol and Ethanol Fuel Blends
  • D6424 – 04a(2014) Standard Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines
  • D6425 – 17 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine
  • D6426 – 13 Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils
  • D6426-RUS – 13 Стандартный метод определения фильтруемости среднедистиллятного нефтяного топлива
  • D6427 – 16 Standard Practice for Handling, Transportation, and Storage of HFC-236fa, 1,1,1,3,3,3-Hexafluoropropane (CF3CH2CF3)
  • D6429 – 99(2011)e1 Standard Guide for Selecting Surface Geophysical Methods
  • D6430 – 99(2010) Standard Guide for Using the Gravity Method for Subsurface Investigation
  • D6431 – 99(2010) Standard Guide for Using the Direct Current Resistivity Method for Subsurface Investigation
  • D6432 – 11 Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation
  • D6433 – 18 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys
  • D6434 – 12 Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes
  • D6436 – 14 Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers
  • D6437 – 05(2016)e1 Standard Test Method for Polyurethane Raw Materials: Alkalinity in Low-Alkalinity Polyols (Determination of CPR Values of Polyols)
  • D6438 – 05(2015) Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography
  • D6439 – 11(2017) Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems
  • D6440 – 10 Standard Terminology Relating to Hydrocarbon Resins
  • D6441 – 05(2016) Standard Test Methods for Measuring the Hiding Power of Powder Coatings
  • D6442 – 06(2012) Standard Test Method for Determination of Copper Release Rate From Antifouling Coatings in Substitute Ocean Water
  • D6443 – 14 Standard Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)
  • D6447 – 09(2014) Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis
  • D6448 – 16 Standard Specification for Industrial Burner Fuels from Used Lubricating Oils
  • D6449 – 99(2015) Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method)
  • D6450 – 16a Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester
  • D6451/D6451M – 99(2014)e1 Standard Guide for Application of Asphalt Based Protection Board
  • D6452 – 99(2012)e1 Standard Guide for Purging Methods for Wells Used for Groundwater Quality Investigations
  • D6454/D6454M – 99(2016)e1 Standard Test Method for Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs)
  • D6455 – 11 Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM)
  • D6456 – 10 Standard Specification for Finished Parts Made from Polyimide Resin
  • D6457 – 08(2013) Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)
  • D6458 – 12 Standard Tables of Body Measurements for Boys, Sizes 8 to 14 Slim and 8 to 20 Regular
  • D6459 – 15 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion
  • D6460 – 12 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
  • D6461/D6461M – 16a Standard Specifications for Silt Fence Materials
  • D6463/D6463M – 06(2012) Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading
  • D6464 – 03a(2017) Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing
  • D6465 – 99(2016) Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants
  • D6466 – 10 Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser
  • D6467 – 13 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils
  • D6468 – 08(2013) Standard Test Method for High Temperature Stability of Middle Distillate Fuels
  • D6468-RUS – 08(2013) Стандартный метод определения стабильности среднедистиллятных топлив при высокой температуре
  • D6468-SP – 08(2013) Método de prueba estándar para estabilidad a alta temperatura de los combustibles de destilación intermedia
  • D6469 – 17 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
  • D6470 – 99(2015) Standard Test Method for Salt in Crude Oils (Potentiometric Method)
  • D6470-RUS – 99(2015) СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ СОЛИ В СЫРОЙ НЕФТИ (ПОТЕНЦИОМЕТРИЧЕСКИЙ МЕТОД)
  • D6471 – 10 Standard Specification for Recycled Prediluted Aqueous Glycol Base Engine Coolant (50 Volume % Minimum) for Automobile and Light-Duty Service
  • D6472 – 10 Standard Specification for Recycled Glycol Base Engine Coolant Concentrate for Automobile and Light-Duty Service
  • D6473 – 15 Standard Test Method For Specific Gravity And Absorption of Rock For Erosion Control
  • D6474 – 12 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
  • D6475 – 17 Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets
  • D6476 – 12(2017) Standard Test Method for Determining Dynamic Air Permeability of Inflatable Restraint Fabrics
  • D6477 – 13e1 Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics
  • D6478 – 10(2014) Standard Test Method for Determining Specific Packability of Fabrics Used in Inflatable Restraints
  • D6479 – 15 Standard Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints
  • D6480 – 05(2010) Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Concentration by Transmission Electron Microscopy
  • D6481 – 14 Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy
  • D6482 – 06(2016) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
  • D6484/D6484M – 14 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
  • D6485 – 11 Standard Guide for Risk Characterization of Acute and Irritant Effects of Short-Term Exposure to Volatile Organic Chemicals Emitted from Bedding Sets
  • D6486 – 01(2017) Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings
  • D6487 – 10 Standard Practice for Preparing Prints of Paste Printing Inks Using a Hand Operated Laboratory Flat-Bed Press
  • D6488 – 08(2013) Standard Terminology Relating to Print Problems
  • D6489 – 99(2012) Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating
  • D6490 – 99(2014) Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels
  • D6491 – 09(2016) Standard Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test
  • D6492 – 99(2016) Standard Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy Coated Steel
  • D6493 – 11(2015) Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus
  • D6494 – 99(2015) Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
  • D6495/D6495M – 15 Standard Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners
  • D6496/D6496M – 04A(2015)e1 Standard Test Method for Determining Average Bonding Peel Strength Between Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners
  • D6497/D6497M – 02(2015)e1 Standard Guide for Mechanical Attachment of Geomembrane to Penetrations or Structures
  • D6499 – 16 Standard Test Method for The Immunological Measurement of Antigenic Protein in Natural Rubber and its Products
  • D6500 – 00(2012)e1 Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser
  • D6501 – 15 Standard Test Method for Phosphonate in Brines
  • D6502 – 10(2015) Standard Test Method for Measurement of On-line Integrated Samples of Low Level Suspended Solids and Ionic Solids in Process Water by X-Ray Fluorescence (XRF)
  • D6503 – 14 Standard Test Method for Enterococci in Water Using Enterolert
  • D6504 – 11(2016)e1 Standard Practice for On-Line Determination of Cation Conductivity in High Purity Water
  • D6505 – 00(2017) Standard Test Method for Assay of normal-Propyl Bromide Content
  • D6506/D6506M – 01(2018)e1 Standard Specification for Asphalt Based Protection Board for Below-Grade Waterproofing
  • D6507 – 16 Standard Practice for Fiber Reinforcement Orientation Codes for Composite Materials
  • D6508 – 15 Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte
  • D6509/D6509M – 16 Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements
  • D6511/D6511M – 06(2011)e1 Standard Test Methods for Solvent Bearing Bituminous Compounds
  • D6512 – 07(2014) Standard Practice for Interlaboratory Quantitation Estimate
  • D6513 – 14 Standard Practice for Calculating the Superimposed Load on Wood-frame Walls for Standard Fire-Resistance Tests
  • D6514 – 03(2014) Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils
  • D6515 – 00(2016) Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
  • D6517 – 00(2012)e1 Standard Guide for Field Preservation of Groundwater Samples
  • D6519 – 15 Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
  • D6520 – 06(2012) Standard Practice for the Solid Phase Micro Extraction (SPME) of Water and its Headspace for the Analysis of Volatile and Semi-Volatile Organic Compounds
  • D6521 – 13 Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)
  • D6522 – 11 Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
  • D6523 – 00(2014)e1 Standard Guide for Evaluation and Selection of Alternative Daily Covers (ADCs) for Sanitary Landfills
  • D6524/D6524M – 16 Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs)
  • D6525/D6525M – 17 Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products
  • D6528 – 17 Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Fine Grain Soils
  • D6529 – 11 Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Feeds from 50–1000 μS/cm
  • D6530 – 00(2013) Standard Test Method for Total Active Biomass in Cooling Tower Waters (Kool Kount Assay; KKA)
  • D6531 – 00(2010) Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement
  • D6532 – 00(2014) Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens
  • D6534 – 05(2010) Standard Test Method for Determining the Peak Force-to-Actuate a Mechanical Pump Dispenser
  • D6535/D6535M – 05(2010)e1 Standard Test Method for Determining the Dip Tube Length of a Mechanical Pump Dispenser
  • D6536/D6536M – 00(2010)e1 Standard Test Method for Measuring the Dip Tube Length of a Mechanical Pump Dispenser
  • D6537 – 00(2014) Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance
  • D6538 – 12 Standard Guide for Sampling Wastewater With Automatic Samplers
  • D6539 – 13 Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air
  • D6540 – 17 Standard Test Method for Accelerated Soiling of Pile Yarn Floor Covering
  • D6541 – 11(2015) Standard Specification for HFC-236fa, 1,1,1,3,3,3–Hexafluoropropane, (CF3CH2CF3)
  • D6542 – 05(2010) Standard Practice for Tonnage Calculation of Coal in a Stockpile
  • D6543 – 17a Standard Guide to the Evaluation of Measurements Made by Online Coal Analyzers
  • D6544 – 12 Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
  • D6545 – 10 Standard Test Method for Flammability of Textiles Used in Children’s Sleepwear
  • D6546 – 15 Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications
  • D6547 – 16 Standard Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple
  • D6549 – 06(2015) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
  • D6550 – 15 Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography
  • D6551/D6551M – 05(2011) Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus
  • D6552 – 06(2016) Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols
  • D6553 – 00(2016) Standard Test Method for Coolant Compatibility of Way Lubricants
  • D6554/D6554M – 14 Standard Specification for 100 % Cotton Denim Fabrics
  • D6555 – 17 Standard Guide for Evaluating System Effects in Repetitive-Member Wood Assemblies
  • D6556 – 17 Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption
  • D6557 – 13 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
  • D6558 – 00A(2015)e1 Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks
  • D6559 – 00A(2016)e1 Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks
  • D6560 – 12 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products
  • D6560-RUS – 12 Стандартный метод определения содержания асфальтенов (нерастворимых в гептане примесей) с сырой нефти и нефтепродуктах
  • D6560-SP – 12 Método de prueba estándar para determinación de asfaltenos (insolubles en heptano) en petróleo crudo y productos derivados del petróleo
  • D6561 – 06(2016) Standard Test Method for Determination of Aerosol Monomeric and Oligomeric Hexamethylene Diisocyanate (HDl) in Air with (Methoxy-2–phenyl-1) Piperazine (MOPIP) in the Workplace
  • D6562 – 12 Standard Test Method for Determination of Gaseous Hexamethylene Diisocyanate (HDI) in Air with 9-(N-methylaminomethyl) Anthracene Method (MAMA) in the Workplace
  • D6564 – 00(2012)e1 Standard Guide for Field Filtration of Groundwater Samples
  • D6566 – 17 Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
  • D6567 – 17 Standard Test Method for Measuring the Light Penetration of a Rolled Erosion Control Product (RECP)
  • D6568 – 00(2011) Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples
  • D6569 – 14 Standard Test Method for On-Line Measurement of pH
  • D6570 – 04(2010) Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber
  • D6572 – 13e2 Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test
  • D6573/D6573M – 13 Standard Specification for General Purpose Wirebound Shipping Boxes
  • D6574/D6574M – 13e1 Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow
  • D6575/D6575M – 16 Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs)
  • D6576 – 13 Standard Specification for Flexible Cellular Rubber Chemically Blown
  • D6577 – 15 Standard Guide for Testing Industrial Protective Coatings
  • D6578/D6578M – 13 Standard Practice for Determination of Graffiti Resistance
  • D6579 – 11(2015) Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon, Rosin and Terpene Resins by Size-Exclusion Chromatography
  • D6580 – 17 Standard Test Method for The Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings
  • D6581 – 12 Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography
  • D6581-RUS – 12 Стандартные методы определения содержания бромата, бромида, хлората и хлорита в питьевой воде с использованием ионной хроматографии с подавлением фоновой проводимости
  • D6583 – 13 Standard Test Method for Porosity of Paint Film by Mineral Oil Absorption
  • D6584 – 17 Standard Test Method for Determination of Total Monoglycerides, Total Diglycerides, Total Triglycerides, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography
  • D6585 – 17 Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape
  • D6586 – 03(2014) Standard Practice for the Prediction of Contaminant Adsorption On GAC In Aqueous Systems Using Rapid Small-Scale Column Tests
  • D6587 – 12e1 Standard Test Method for Yarn Number Using Automatic Tester
  • D6588/D6588M – 11(2016) Standard Test Method for Fatigue of Tire Cords (Disc Fatigue Test)
  • D6589 – 05(2015) Standard Guide for Statistical Evaluation of Atmospheric Dispersion Model Performance
  • D6590/D6590M – 00(2012) Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans
  • D6591 – 11(2017) Standard Test Method for Determination of Aromatic Hydrocarbon Types in Middle Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
  • D6593 – 17 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
  • D6594 – 14 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135°C
  • D6595 – 17 Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry
  • D6596 – 00(2016) Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials
  • D6598 – 11 Standard Guide for Installing and Operating Settlement Platforms for Monitoring Vertical Deformations
  • D6599 – 00(2014)e1 Standard Practice for Construction of Live Fascines on Slopes
  • D6600 – 00(2017) Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods
  • D6601 – 15 Standard Test Method for Rubber Properties—Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
  • D6601-RUS – 15 Стандартный метод определения свойств каучука ― Измерение вулканизационных и послевулканизационных динамических свойств с помощью безроторного сдвигового реометра
  • D6602 – 13 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
  • D6603 – 12 Standard Specification for Labeling of UV-Protective Textiles
  • D6604 – 00(2017) Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry
  • D6605 – 06(2015) Standard Practice for Determining the Color Stability of Hydrocarbon Resins After Heating
  • D6606 – 00(2017) Standard Test Method for Viscosity and Yield of Vehicles and Varnishes by the Duke Viscometer
  • D6607 – 00(2015) Standard Practice for Inclusion of Precision Statement Variation in Specification Limits
  • D6608 – 12 Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes
  • D6609 – 17 Standard Guide for Part-Stream Sampling of Coal
  • D6611 – 16 Standard Test Method for Wet and Dry Yarn-on-Yarn Abrasion Resistance
  • D6612 – 00(2016) Standard Test Method for Yarn Number and Yarn Number Variability Using Automated Tester
  • D6613 – 08(2013) Standard Practice for Determining the Presence of Sizing in Nylon or Polyester Fabric
  • D6614 – 07(2015) Standard Test Method for Stretch Properties of Textile Fabrics – CRE Method
  • D6615 – 15a Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
  • D6616 – 17 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100 °C
  • D6617 – 17 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
  • D6617-RUS – 17 СТАНДАРТНАЯ МЕТОДИКА ОПРЕДЕЛЕНИЯ ЛАБОРАТОРНОЙ СИСТЕМАТИЧЕСКОЙ ПОГРЕШНОСТИ С ИСПОЛЬЗОВАНИЕМ РЕЗУЛЬТАТА ОДНОКРАТНОГО ИСПЫТАНИЯ СТАНДАРТНОГО МАТЕРИАЛА
  • D6618 – 16 Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine
  • D6619 – 00(2016) Standard Practice for Incorporating Pigments by High Speed Dispersion
  • D6620 – 06(2010) Standard Practice for Asbestos Detection Limit Based on Counts
  • D6621 – 00(2017) Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
  • D6622/D6622M – 01(2018)e1 Standard Guide for Application of Fully Adhered Hot-Applied Reinforced Waterproofing Systems
  • D6624 – 14 Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data
  • D6625 – 13 Standard Practice for Conducting a Test of Protective Properties of Polish Applied to a Painted Panel Using Fluorescent UV-Condensation Light- and Water-Exposure Apparatus
  • D6626 – 15 Standard Specification for Performance Graded Trinidad Lake Modified Asphalt Binder
  • D6627/D6627M – 11(2016) Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures
  • D6628 – 16 Standard Specification for Color of Pavement Marking Materials
  • D6629 – 01(2012)e1 Standard Guide for Selection of Methods for Estimating Soil Loss by Erosion
  • D6630/D6630M – 16 Standard Guide for Low Slope Insulated Roof Membrane Assembly Performance
  • D6631 – 05(2015) Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method
  • D6633 – 05(2010) Standard Test Method for Basic Functional Stability of a Mechanical Pump Dispenser
  • D6634/D6634M – 14 Standard Guide for the Selection of Purging and Sampling Devices for Groundwater Monitoring Wells
  • D6635 – 15 Standard Test Method for Performing the Flat Plate Dilatometer
  • D6636 – 01(2011) Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes
  • D6637/D6637M – 15 Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method
  • D6638 – 11 Standard Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)
  • D6640 – 01(2015) Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations
  • D6641/D6641M – 16e1 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
  • D6643 – 01(2016) Standard Test Method for Testing Wood-Base Panel Corner Impact Resistance
  • D6644 – 01(2013) Standard Test Method for Tension Strength of Sew-Through Flange Buttons
  • D6645 – 01(2010) Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
  • D6646 – 03(2014) Standard Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon
  • D6647 – 01(2011) Standard Test Method for Determination of Acid Soluble Iron Via Atomic Absorption
  • D6648 – 08(2016) Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
  • D6653/D6653M – 13 Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method
  • D6654 – 05(2010) Standard Test Method for Basic Storage Stability of a Mechanical Pump Dispenser
  • D6656 – 16 Standard Test Method for Determination of Chromic Oxide in Wet Blue (Perchloric Acid Oxidation)
  • D6657 – 16 Standard Test Method for pH of Wet Blue and Wet White
  • D6658 – 08(2013) Standard Test Method for Volatile Matter (Moisture) of Wet Blue by Oven Drying
  • D6659 – 16 Standard Practice for Sampling and Preparation of Wet Blue and Wet White for Physical and Chemical Tests
  • D6660 – 01(2014)e1 Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
  • D6660-RUS – 01(2014)e1 Стандартный метод определения точки замерзания водных охлаждающих жидкостей двигателя на основе этиленгликоля методом автоматического фазового перехода
  • D6661 – 17 Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling
  • D6662 – 17 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards
  • D6663 – 08(2013) Standard Specification for Woven and Knitted Comforter and Accessory Products for Institutional and Household Use
  • D6665 – 09(2014) Standard Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling Water Test
  • D6666 – 04(2014) Standard Guide for Evaluation of Aqueous Polymer Quenchants
  • D6667 – 14 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
  • D6668 – 01(2016) Standard Test Method for Discrimination Between Flammability Ratings of F = 0 and F = 1
  • D6669 – 12 Standard Practice for Selecting and Constructing Exposure Scenarios for Assessment of Exposures to Alkyd and Latex Interior Paints
  • D6670 – 13 Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products
  • D6671/D6671M – 13e1 Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
  • D6673 – 10 Standard Practice for Sewn Products Pattern Data Interchange-Data Format
  • D6674 – 01(2017) Standard Guide for Proficiency Test Program for Fabrics
  • D6675 – 01(2015) Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel
  • D6676/D6676M – 13 Standard Test Method for Cathodic Disbonding of Exterior Pipeline Coatings at Elevated Temperatures Using Interior Heating
  • D6677 – 07(2012) Standard Test Method for Evaluating Adhesion by Knife
  • D6681 – 17 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure
  • D6683 – 14 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
  • D6684 – 04(2010) Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems
  • D6685 – 01(2015) Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete (FFC)
  • D6686 – 01(2013) Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings
  • D6687 – 07(2013) Standard Guide for Testing Printing Ink Vehicles and Components Thereof
  • D6688 – 11 Standard Practice for Relative Resistance of Printed Matter to Liquid Chemicals by a Sandwich Technique
  • D6689 – 01(2011) Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
  • D6690 – 15 Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements
  • D6691 – 17 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum
  • D6693/D6693M – 04(2015)e1 Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes
  • D6694/D6694M – 15 Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems
  • D6695 – 16 Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
  • D6696 – 16 Standard Guide for Understanding Cyanide Species
  • D6698 – 14 Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water
  • D6699 – 16 Standard Practice for Sampling Liquids Using Bailers
  • D6700 – 01(2013) Standard Practice for Use of Scrap Tire-Derived Fuel
  • D6701 – 16 Standard Test Method for Determining Water Vapor Transmission Rates Through Nonwoven and Plastic Barriers
  • D6703 – 14 Standard Test Method for Automated Heithaus Titrimetry
  • D6704 – 08(2015) Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material
  • D6705/D6705M – 04(2018) Standard Guide for Repair and Recoat of Spray Polyurethane Foam Roofing Systems
  • D6706 – 01(2013) Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil
  • D6707/D6707M – 06(2016)e1 Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications
  • D6708 – 16b Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
  • D6709 – 15a Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)
  • D6710 – 17 Standard Guide for Evaluation of Hydrocarbon-Based Quench Oil
  • D6711 – 15 Standard Practice for Specifying Rock to Fill Gabions, Revet Mattresses, and Gabion Mattresses
  • D6712 – 17 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
  • D6713 – 14 Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)
  • D6714 – 16 Standard Test Method for Chromic Oxide in Ashed Wet Blue (Perchloric Acid Oxidation)
  • D6715 – 13 Standard Practice for Sampling and Preparation of Fresh or Salt-Preserved (Cured) Hides and Skins for Chemical and Physical Tests
  • D6716 – 08(2013) Standard Test Method for Total Ash in Wet Blue or Wet White
  • D6717 – 07(2012) Standard Test Method for Linear Density of Elastomeric Yarns (Skein Specimens)
  • D6719 – 12 Standard Guide for Standard Test Methods and Practices for Evaluating Pile Yarn Floor Covering
  • D6720 – 07(2012) Standard Test Method for Evaluation of Recoverable Stretch of Stretch Yarns (Skein Method)
  • D6721 – 01(2015) Standard Test Method for Determination of Chlorine in Coal by Oxidative Hydrolysis Microcoulometry
  • D6722 – 11 Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by Direct Combustion Analysis
  • D6722-RUS – 11 Стандартный метод определения общего содержания ртути в угле и в продуктах сгорания угля с помощью прямого органического анализа
  • D6723 – 12 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
  • D6724/D6724M – 16 Standard Guide for Installation of Direct Push Groundwater Monitoring Wells
  • D6725/D6725M – 16 Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers
  • D6726 – 15 Standard Guide for Conducting Borehole Geophysical Logging—Electromagnetic Induction
  • D6727/D6727M – 16 Standard Guide for Conducting Borehole Geophysical Logging—Neutron
  • D6728 – 16 Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry
  • D6729 – 14 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography
  • D6729-RUS – 14 Стандартный метод определения отдельных компонентов моторных топлив искрового зажигания при помощи 100- метрового капиллярного газового хромотографа высокого разрешения
  • D6730 – 01(2016) Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100–Metre Capillary (with Precolumn) High-Resolution Gas Chromatography
  • D6730-RUS – 01(2016) Стандартный метод определения содержания отдельных компонентов топлива для двигателей с искровым зажиганием с помощью газовой хроматографии высокого разрешения на 100-метровой капиллярной колонке (с предколонкой)
  • D6731 – 01(2011) Standard Test Method for Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer
  • D6732 – 04(2015) Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
  • D6733 – 01(2016) Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography
  • D6733-RUS – 01(2016) Стандартный метод определения содержания отдельных компонент топлива для двигателей с искровым зажиганием при использовании газовой хроматографии высокого разрешения на 50-метровой капиллярной колонке
  • D6736 – 08(2013) Standard Test Method for Burnish Resistance of Latex Paints
  • D6737 – 12(2017) Standard Test Method for Bulk Density of Tapered Paintbrush Filaments
  • D6738 – 15 Standard Test Method for Precipitated Silica—Volatile Content
  • D6739 – 11(2015) Standard Test Method for Silica—pH Value
  • D6740 – 15 Standard Test Method for Silanes Used in Rubber Formulations(bis-(triethoxysilylpropyl)sulfanes): Residue on Ignition
  • D6741 – 10(2015) Standard Test Methods for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Sulfur Content
  • D6742/D6742M – 17 Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
  • D6743 – 11(2015) Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids
  • D6744 – 06(2017)e1 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
  • D6745 – 11(2015) Standard Test Method for Linear Thermal Expansion of Electrode Carbons
  • D6746 – 15 Standard Test Method for Determination of Green Strength and Stress Relaxation of Raw Rubber or Unvulcanized Compounds
  • D6746-RUS – 15 Стандартный метод определения когезионной прочности и релаксации напряжений сырого каучука или невулканизированных резиновых смесей
  • D6747 – 15 Standard Guide for Selection of Techniques for Electrical Leak Location of Leaks in Geomembranes
  • D6748 – 02a(2017) Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)
  • D6749 – 02(2012) Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)
  • D6749-RUS – 02(2012) Стандартный метод определения температуры потери текучести нефтепродуктов (Автоматический пневмометод)
  • D6750 – 17 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
  • D6751 – 15ce1 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
  • D6752/D6752M – 17 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
  • D6753/D6753M – 02(2016) Standard Specification for Coal Tar Adhesive
  • D6754/D6754M – 15 Standard Specification for Ketone Ethylene Ester Based Sheet Roofing
  • D6756 – 17 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
  • D6757/D6757M – 16a Standard Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing
  • D6759 – 16 Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers
  • D6760 – 16 Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing
  • D6761 – 17 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
  • D6762 – 02a(2017) Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings
  • D6763 – 16 Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents
  • D6764 – 02(2013) Standard Guide for Collection of Water Temperature, Dissolved-Oxygen Concentrations, Specific Electrical Conductance, and pH Data from Open Channels
  • D6765 – 13 Standard Practice for Live Staking
  • D6766 – 12 Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions
  • D6767 – 16 Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test
  • D6768/D6768M – 04(2015)e2 Standard Test Method for Tensile Strength of Geosynthetic Clay Liners
  • D6769/D6769M – 02(2010)e1 Standard Guide for Application of Fully Adhered, Cold-Applied, Prefabricated Reinforced Modified Bituminous Membrane Waterproofing Systems
  • D6770 – 07(2015) Standard Test Method for Abrasion Resistance of Textile Webbing (Hex Bar Method)
  • D6772/D6772M – 16 Standard Test Method for Dimensional Stability of Sandwich Core Materials
  • D6773 – 16 Standard Test Method for Bulk Solids Using Schulze Ring Shear Tester
  • D6774 – 02(2010) Standard Test Method for Crimp and Shrinkage Properties for Textured Yarns Using a Dynamic Textured Yarn Tester
  • D6775 – 13(2017) Standard Test Method for Breaking Strength and Elongation of Textile Webbing, Tape and Braided Material
  • D6777 – 16 Standard Test Method for Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding
  • D6778 – 14 Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM)
  • D6779 – 17 Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)
  • D6780/D6780M – 12 Standard Test Method for Water Content and Density of Soil In situ by Time Domain Reflectometry (TDR)
  • D6781 – 02(2014) Standard Guide for Carbon Reactivation
  • D6782 – 13 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
  • D6783 – 05a(2017) Standard Specification for Polymer Concrete Pipe
  • D6784 – 16 Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
  • D6785 – 13 Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry
  • D6786 – 15 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
  • D6787/D6787M – 02(2017) Standard Specification for Repositionable Note Pad
  • D6788 – 02(2017) Standard Specification for Repositionable Pressure-Sensitive Flags
  • D6790/D6790M – 16 Standard Test Method for Determining Poisson’s Ratio of Honeycomb Cores
  • D6791 – 11(2017)e1 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
  • D6792 – 17 Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
  • D6792-RUS – 17 CТАНДАРТНАЯ МЕТОДИКА ДЛЯ СИСТЕМ УПРАВЛЕНИЯ КАЧЕСТВОМ В ЛАБОРАТОРИЯХ, ПРОВОДЯЩИХ ИСПЫТАНИЯ НЕФТЕПРОДУКТОВ, ЖИДКИХ ТОПЛИВ И СМАЗОЧНЫХ МАТЕРИАЛОВ
  • D6793 – 02(2012) Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
  • D6794 – 14 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long(6 h) Heating Time
  • D6795 – 13 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30 min) Heating Time
  • D6796 – 16 Standard Practice for Production of Coal, Coke and Coal Combustion Samples for Interlaboratory Studies
  • D6797 – 15 Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test
  • D6798 – 02(2013)e2 Standard Terminology Relating to Flax and Linen
  • D6799 – 13 Standard Terminology Relating to Inflatable Restraints
  • D6800 – 12 Standard Practice for Preparation of Water Samples Using Reductive Precipitation Preconcentration Technique for ICP-MS Analysis of Trace Metals
  • D6801 – 07(2015) Standard Test Method for Measuring Maximum Spontaneous Heating Temperature of Art and Other Materials
  • D6802 – 02(2010) Test Method for Determination of the Relative Content Of Dissolved Decay Products in Mineral Insulating Oils by Spectrophotometry
  • D6803 – 13 Standard Practice for Testing and Sampling of Volatile Organic Compounds (Including Carbonyl Compounds) Emitted from Paint Using Small Environmental Chambers
  • D6804 – 02(2015) Standard Guide for Hand Hole Design in Corrugated Boxes
  • D6805 – 02(2016) Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/ Aliphatic Ratio of Bituminous Emulsions
  • D6806 – 02(2017) Standard Practice for Analysis of Halogenated Organic Solvents and Their Admixtures by Gas Chromatography
  • D6807 – 02(2009) Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Reverse Osmosis Permeates from2 to 100 S/cm
  • D6808 – 02(2012) Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis
  • D6809 – 02(2016) Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials
  • D6810 – 13 Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry
  • D6812 – 04a(2014) Standard Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines
  • D6814 – 02(2013) Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density
  • D6815 – 09(2015) Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products
  • D6816 – 11(2016) Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders
  • D6817/D6817M – 17 Standard Specification for Rigid Cellular Polystyrene Geofoam
  • D6818 – 17 Standard Test Method for Ultimate Tensile Properties of Rolled Erosion Control Products
  • D6821 – 17 Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer
  • D6822 – 12b(2017) Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method
  • D6823 – 08(2013) Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils
  • D6824 – 13e1 Standard Test Method for Determining Filterability of Aviation Turbine Fuel
  • D6825 – 14 Standard Guide for Placement of Riprap Revetments
  • D6826 – 05(2014)e1 Standard Specification for Sprayed Slurries, Foams and Indigenous Materials Used As Alternative Daily Cover for Municipal Solid Waste Landfills
  • D6827 – 02(2016) Standard Test Method for Zinc Analysis of Floor Polishes and Floor Polish Polymers By Flame Atomic Absorption (A.A.)
  • D6828 – 02(2015) Standard Test Method for Stiffness of Fabric by Blade/Slot Procedure
  • D6829 – 02(2015) Standard Tables of Body Measurements for Juniors, Sizes 0 to 19
  • D6830 – 02(2016) Standard Test Method for Characterizing the Pressure Drop and Filtration Performance of Cleanable Filter Media
  • D6831 – 11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
  • D6832 – 13e1 Standard Test Method for the Determination of Hexavalent Chromium in Workplace Air by Ion Chromatography and Spectrophotometric Measurement Using 1,5-diphenylcarbazide
  • D6835 – 17 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
  • D6836 – 16 Standard Test Methods for Determination of the Soil Water Characteristic Curve for Desorption Using Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, or Centrifuge
  • D6837 – 13 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine
  • D6838 – 04(2010) Standard Test Method for Cummins M11 High Soot Test
  • D6839 – 17 Standard Test Method for Hydrocarbon Types, Oxygenated Compounds, and Benzene in Spark Ignition Engine Fuels by Gas Chromatography
  • D6840 – 02(2013) Standard Test Method for Effect of Drycleaning on Buttons
  • D6841 – 16 Standard Practice for Calculating Design Value Treatment Adjustment Factors for Fire-Retardant-Treated Lumber
  • D6843 – 10(2015) Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by Gas Chromatography (GC)
  • D6844 – 10(2015) Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by High Performance Liquid Chromatography (HPLC)
  • D6845 – 12 Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area
  • D6846 – 02(2012) Standard Practice for Preparing Prints of Paste Printing Inks with a Printing Gage
  • D6849 – 13 Standard Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods
  • D6850 – 13 Standard Guide for QC of Screening Methods in Water
  • D6851 – 02(2011) Standard Test Method for Determination of Contact pH with Activated Carbon
  • D6854 – 15a Standard Test Method for Silica—Oil Absorption Number (OAN)
  • D6855 – 17 Standard Test Method for Determination of Turbidity Below 5 NTU in Static Mode
  • D6856/D6856M – 03(2016) Standard Guide for Testing Fabric-Reinforced “Textile” Composite Materials
  • D6857/D6857M – 17 Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method
  • D6859 – 11 Standard Test Method for Pile Thickness of Finished Level Pile Yarn Floor Coverings
  • D6860/D6860M – 13 Standard Tables of Body Measurements for Boys, Sizes 4H to 20H Husky
  • D6862 – 11(2016) Standard Test Method for 90 Degree Peel Resistance of Adhesives
  • D6864 – 11 Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products
  • D6864-RUS – 11 Стандартная спецификация на цветостойкость и сохранение внешнего вида пластмассовых обшивочных изделий сплошной окраски
  • D6865 – 17 Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM–Styrene (AES) Plastics and Alloys Molding and Extrusion Materials
  • D6866 – 16 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
  • D6867 – 03(2014) Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing
  • D6868 – 17 Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers as Coatings or Additives with Paper and Other Substrates Designed to be Aerobically Composted in Municipal or Industrial Facilities
  • D6869 – 17 Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
  • D6871 – 17 Standard Specification for Natural (Vegetable Oil) Ester Fluids Used in Electrical Apparatus
  • D6873/D6873M – 17 Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates
  • D6874 – 12 Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration
  • D6875 – 18 Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor
  • D6877 – 13e1 Standard Test Method for Monitoring Diesel Particulate Exhaust in the Workplace
  • D6878/D6878M – 17 Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing
  • D6880/D6880M – 11 Standard Specification for Wood Boxes
  • D6881/D6881M – 03(2013) Standard Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density
  • D6883 – 17 Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles
  • D6884 – 03(2015)e1 Standard Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems
  • D6886 – 14e1 Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography
  • D6887 – 03(2013) Standard Test Method for Testing Alkyd Compatibility with Resin or Resin Solutions
  • D6888 – 16 Standard Test Method for Available Cyanides with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
  • D6889 – 03(2017) Standard Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME)
  • D6890 – 16e1 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
  • D6891 – 15 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine
  • D6892 – 03(2014) Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)
  • D6894 – 13 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine
  • D6895 – 17 Standard Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100 °C
  • D6896 – 17 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature
  • D6897 – 16 Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)
  • D6897-RUS – 16 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ ДАВЛЕНИЯ ПАРОВ СЖИЖЕННЫХ НЕФТЯНЫХ ГАЗОВ (LPG) (МЕТОД РАСШИРЕНИЯ)
  • D6898 – 03(2016) Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig
  • D6900 – 10(2015) Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate
  • D6901 – 15 Standard Specification for Artists’ Colored Pencils
  • D6902 – 04(2017) Standard Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings
  • D6903 – 07(2013) Standard Test Method for Determination of Organic Biocide Release Rate From Antifouling Coatings in Substitute Ocean Water
  • D6904 – 03(2013) Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry
  • D6905 – 03(2012) Standard Test Method for Impact Flexibility of Organic Coatings
  • D6906 – 12a(2016) Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
  • D6907 – 05(2016) Standard Practice for Sampling Soils and Contaminated Media with Hand-Operated Bucket Augers
  • D6908 – 06(2017) Standard Practice for Integrity Testing of Water Filtration Membrane Systems
  • D6909 – 10(2016) Standard Specification for High Temperature and Acid-Resistant Fluorocarbon Terpolymer Elastomer
  • D6910/D6910M – 09 Standard Test Method for Marsh Funnel Viscosity of Clay Construction Slurries
  • D6911 – 15 Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis
  • D6913/D6913M – 17 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
  • D6914/D6914M – 16 Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices
  • D6915 – 17e1 Standard Practice for Carbon Black—Evaluation of Standard Reference Blacks
  • D6916 – 06c(2011) Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)
  • D6917 – 16 Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD)
  • D6918 – 09(2014)e1 Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition
  • D6919 – 17 Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography
  • D6920 – 13 Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection
  • D6922 – 13 Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils
  • D6923 – 17 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure
  • D6924 – 03(2017) Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges
  • D6925 – 15 Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor
  • D6926 – 16 Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus
  • D6927 – 15 Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures
  • D6928 – 17 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
  • D6929 – 16 Standard Practice to Evaluate the Effect of Freezing on Emulsified Asphalts
  • D6930 – 10 Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts
  • D6931 – 17 Standard Test Method for Indirect Tensile (IDT) Strength of Asphalt Mixtures
  • D6932/D6932M – 08(2013) Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures
  • D6933 – 13 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)
  • D6934 – 08(2016) Standard Test Method for Residue by Evaporation of Emulsified Asphalt
  • D6935 – 17 Standard Test Method for Determining Cement Mixing of Emulsified Asphalt
  • D6936 – 17 Standard Test Method for Determining Demulsibility of Emulsified Asphalt
  • D6937 – 16 Standard Test Method for Determining Density of Emulsified Asphalt
  • D6938 – 17a Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
  • D6940 – 10 Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids
  • D6941 – 12 Standard Practice for Measuring Fluidization Segregation Tendencies of Powders
  • D6942 – 03(2012) Standard Test Method for Stability of Cellulose Fibers in Alkaline Environments
  • D6943 – 15 Standard Practice for Immersion Testing of Industrial Protective Coatings and Linings
  • D6944 – 15 Standard Practice for Determining the Resistance of Cured Coatings to Thermal Cycling
  • D6945/D6945M – 03(2017) Standard Specification for Emulsified Refined Coal-Tar (Ready to Use, Commercial Grade)
  • D6946/D6946M – 13e1 Standard Specification for Emulsified Refined Coal-Tar (Driveway Sealer, Ready to Use, Primarily Residential Grade)
  • D6947/D6947M – 16 Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System
  • D6948/D6948M – 03(2017) Standard Practice for Application of Refined Coal Tar (Ready to Use, Commercial Grade)
  • D6951/D6951M – 09(2015) Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
  • D6953 – 11 Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)
  • D6954 – 04(2013) Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation
  • D6956 – 17 Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use
  • D6957 – 12 Standard Practice for Measuring Curl in Paint Brush Filling Material
  • D6958 – 03(2014) Standard Test Methods for Evaluating Side-Bonding Potential of Wood Coatings
  • D6960/D6960M – 16 Standard Tables for Body Measurements for Plus Women’s Figure Type, Size Range 14W–20W
  • D6961/D6961M – 09(2015)e1 Standard Test Method for Color Measurement of Flax Fiber
  • D6962 – 17 Standard Practice for Operation of a Roller Chair Tester for Pile Yarn Floor Coverings
  • D6963 – 13 Standard Terminology Relating to Sewn Products Automation
  • D6966 – 13 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
  • D6968 – 03(2015) Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection
  • D6969 – 17 Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis
  • D6970 – 03(2013)e1 Standard Practice for Collection of Calcined Petroleum Coke Samples for Analysis
  • D6971 – 09(2014) Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry
  • D6973 – 14 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
  • D6974 – 16 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
  • D6975 – 04(2010) Standard Test Method for Cummins M11 EGR Test
  • D6976 – 13 Standard Specification for Rubber Contraceptives—Vaginal Diaphragms
  • D6977 – 04(2016) Standard Specification for Polychloroprene Examination Gloves for Medical Application
  • D6978 – 05(2013) Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs
  • D6979 – 13 Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen
  • D6980 – 17 Standard Test Method for Determination of Moisture in Plastics by Loss in Weight
  • D6982 – 09(2016) Standard Practice for Detecting Hot Spots Using Point-Net (Grid) Search Patterns
  • D6984 – 17a Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine
  • D6986 – 03(2016) Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
  • D6987/D6987M – 13a Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine
  • D6988 – 13 Standard Guide for Determination of Thickness of Plastic Film Test Specimens
  • D6989 – 03(2013) Standard Practices for Preparation of Solvent and Water Based Ink Resin Solutions
  • D6990 – 05(2011) Standard Practice for Evaluating Biofouling Resistance and Physical Performance of Marine Coating Systems
  • D6991 – 17e1 Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method
  • D6992 – 16 Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
  • D6994 – 15 Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection
  • D6995 – 05(2013) Standard Test Method for Determining Field VMA based on the Maximum Specific Gravity of the Mix (Gmm)
  • D6997 – 12 Standard Test Method for Distillation of Emulsified Asphalt
  • D6998 – 11 Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts
  • D6999 – 12 Standard Practice for Miscibility of Emulsified Asphalts
  • D7000 – 11(2017) Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples
  • D7001 – 06(2011) Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications
  • D7002 – 16 Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Puddle Method
  • D7003/D7003M – 03(2013)e1 Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes
  • D7004/D7004M – 03(2013)e1 Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes
  • D7005/D7005M – 16 Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites
  • D7006 – 03(2013) Standard Practice for Ultrasonic Testing of Geomembranes
  • D7007 – 16 Standard Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water or Earthen Materials
  • D7008 – 08(2013) Standard Specification for Geosynthetic Alternate Daily Covers
  • D7011 – 15 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection
  • D7011-RUS – 15 Стандартный метод определения следов тиофена в очищенном бензоле с помощью газовой хроматографии и селективного детектирования серы
  • D7012 – 14e1 Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
  • D7013/D7013M – 15 Standard Guide for Calibration Facility Setup for Nuclear Surface Gauges
  • D7014 – 10 Standard Practice for Assembly and Placement of Double-Twisted Wire Mesh Gabions and Revet Mattresses
  • D7015 – 13 Standard Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils
  • D7016/D7016M – 14 Standard Test Method to Evaluate Edge Binding Components Used in Mattresses After Exposure to An Open Flame
  • D7017 – 14 Standard Performance Specification for Rainwear and All-Purpose, Water-Repellent Coat Fabrics
  • D7018/D7018M – 12 Standard Terminology Relating to Glass Fiber and Its Products
  • D7019 – 14 Standard Performance Specification for Brassiere, Slip, Lingerie and Underwear Fabrics
  • D7020 – 14 Standard Performance Specification for Woven Blouse, Dress, Dress Shirt & Sport Shirt Fabrics
  • D7021 – 14 Standard Performance Specification for Bathrobe, Dressing Gown, Negligee, Nightgown, and Pajama Fabrics
  • D7022 – 13e1 Standard Terminology Relating to Apparel
  • D7023 – 06(2012) Standard Terminology Relating to Home Furnishings
  • D7025 – 09(2015)e1 Standard Test Method for Assessing Clean Flax Fiber Fineness
  • D7026 – 13 Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis
  • D7027 – 13 Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine
  • D7028 – 07(2015) Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
  • D7029 – 17 Standard Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0°F (82.2°C)
  • D7030 – 04(2017) Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine
  • D7031 – 11 Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products
  • D7032 – 17 Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails
  • D7033 – 14 Standard Practice for Establishing Design Capacities for Oriented Strand Board (OSB) Wood-Based Structural-Use Panels
  • D7034 – 11 Standard Guide for Deriving Acceptable Levels of Airborne Chemical Contaminants in Aircraft Cabins Based on Health and Comfort Considerations
  • D7035 – 16 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
  • D7036 – 16 Standard Practice for Competence of Air Emission Testing Bodies
  • D7038 – 17 Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants
  • D7039 – 15a Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
  • D7040 – 04(2015) Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
  • D7041 – 16 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbons and Hydrocarbon-Oxygenate Blends by Gas Chromatography with Flame Photometric Detection
  • D7042 – 16e3 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
  • D7042-RUS – 16e3 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ ДИНАМИЧЕСКОЙ ВЯЗКОСТИ И ПЛОТНОСТИ ЖИДКОСТЕЙ С ПОМОЩЬЮ ВИСКОЗИМЕТРА ШТАБИНГЕРА (И РАСЧЕТ КИНЕМАТИЧЕСКОЙ ВЯЗКОСТИ)
  • D7043 – 17 Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
  • D7044 – 15 Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids
  • D7045 – 17 Standard Guide for Optimization of Groundwater Monitoring Constituents for Detection Monitoring Programs for Waste Disposal Facilities
  • D7046 – 11 Standard Guide for Use of the Metal Detection Method for Subsurface Exploration
  • D7047 – 15e1 Standard Test Method for Swell Volume of Plantago Insularis (Ovata, Psyllium)
  • D7048 – 16 Standard Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs
  • D7049 – 17 Standard Test Method for Metalworking Fluid Aerosol in Workplace Atmospheres
  • D7050 – 04(2014) Standard Practice for Rubber from Natural Sources—Sampling and Sorting Bales Based on Predicted Processing Properties
  • D7051 – 05(2013) Standard Test Method for Cyclic Thermal Shock of SBS-Modified Bituminous Roofing Sheets with Factory-Applied Metal Surface
  • D7052/D7052M – 17 Standard Test Method for Determining Impact Resistance of New Low Slope Roof Membranes Using Steel Balls (Z8295Z)
  • D7053/D7053M – 17 Standard Guide for Determining and Evaluating Causes of Water Leakage of Low-Sloped Roofs
  • D7054 – 04(2013) Standard Specification for Cautionary Labeling of Extension Poles For Use With Paint Applicators Distributed In North America
  • D7055 – 14 Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings
  • D7056 – 07(2012) Standard Test Method for Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams
  • D7057 – 18 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)
  • D7058 – 04(2014) Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer
  • D7059 – 09(2017) Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography
  • D7060 – 12(2014) Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)
  • D7061 – 12 Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device
  • D7063/D7063M – 17 Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Asphalt Mixture Samples
  • D7064/D7064M – 08(2013) Standard Practice for Open-Graded Friction Course (OGFC) Mix Design
  • D7065 – 11 Standard Test Method for Determination of Nonylphenol, Bisphenol A, p-tert -Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Gas Chromatography Mass Spectrometry
  • D7066 – 04(2017) Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination
  • D7069 – 04(2015) Standard Guide for Field Quality Assurance in a Groundwater Sampling Event
  • D7070 – 16 Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature
  • D7072 – 04(2013) Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings
  • D7073 – 05(2012) Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films
  • D7076 – 10(2015)e1 Standard Test Method for Measurement of Shives in Retted Flax
  • D7078/D7078M – 12 Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
  • D7078/D7078M-RUS – 12 Стандартный метод определения механических свойств композитных материалов при сдвиге путем приложения сдвигового усилия к зажатому между рельсовыми направляющими образцу с V-образным надрезом
  • D7082 – 15 Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe
  • D7083 – 16 Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography
  • D7084 – 04(2017) Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
  • D7085 – 04(2010)e1 Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)
  • D7085-RUS – 04(2010)e1 СТАНДАРТНОЕ РУКОВОДСТВО ПО ОПРЕДЕЛЕНИЮ ХИМИЧЕСКИХ ЭЛЕМЕНТОВ В КАТАЛИЗАТОРАХ ФЛЮИД- КАТАЛИТИЧЕСКОГО КРЕКИНГА С ПОМОЩЬЮ РЕНТГЕНОФЛУОРЕСЦЕНТНОЙ (РФ) СПЕКТРОМЕТРИИ
  • D7087 – 05a(2010) Standard Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments
  • D7088 – 17 Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry
  • D7089 – 06(2014) Standard Practice for Determination of the Effectiveness of Anti-Graffiti Coating for Use on Concrete, Masonry and Natural Stone Surfaces by Pressure Washing
  • D7090 – 04(2010) Standard Test Method for Purity of Isophorone by Capillary Gas Chromatography
  • D7091 – 13 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
  • D7093 – 13 Standard Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome
  • D7094 – 17 Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
  • D7095 – 17 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
  • D7096 – 16 Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography
  • D7096-RUS – 16 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ ИНТЕРВАЛОВ КИПЕНИЯ БЕНЗИНА С ПОМОЩЬЮ ГАЗОВОЙ ХРОМАТОГРАФИИ С КАПИЛЛЯРНОЙ КОЛОНКОЙ БОЛЬШОГО ДИАМЕТРА
  • D7097 – 16a Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test—TEOST MHT
  • D7097-RUS – 16a ОПРЕДЕЛЕНИЕ МАССЫ ОТЛОЖЕНИЙ НА ПОРШНЕ МЕТОДОМ МОДЕЛЬНЫХ ИСПЫТАНИЙ МАШИННОГО МАСЛА НА ТЕРМООКИСЛЯЕМОСТЬ ПРИ УМЕРЕННЫХ ТЕМПЕРАТУРАХ (МЕТОД TEOST MHT)
  • D7098 – 08(2015) Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
  • D7099 – 04(2010) Standard Terminology Relating to Frozen Soil and Rock
  • D7100 – 11 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions
  • D7101 – 13 Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions
  • D7102 – 17 Standard Guide for Determination of Endotoxin on Sterile Medical Gloves
  • D7103 – 06(2013) Standard Guide for Assessment of Medical Gloves
  • D7105 – 06(2013) Standard Test Method for Determining the Adhesive and Cohesive Strength Between Materials in Roofing or Waterproofing Membranes and Systems
  • D7106/D7106M – 05(2015)e1 Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes
  • D7108 – 12 Standard Guide for Establishing Qualifications for a Nuclear Coatings Specialist
  • D7109 – 12 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus at 30 and 90 Cycles
  • D7110 – 15 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
  • D7111 – 16 Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
  • D7111-RUS – 16 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ СОДЕРЖАНИЯ МИКРОЭЛЕМЕНТОВ В СРЕДНЕДИСТИЛЛЯТНЫХ ТОПЛИВАХ С ПОМОЩЬЮ АТОМНО-ЭМИССИОННОЙ СПЕКТРОМЕТРИИ С ИНДУКТИВНО СВЯЗАННОЙ ПЛАЗМОЙ (ICP-AES)
  • D7112 – 12(2017) Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
  • D7113/D7113M – 10(2016) Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods
  • D7115 – 10(2015) Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading
  • D7116 – 16 Standard Specification for Joint Sealants, Hot Applied, Jet Fuel Resistant Types, for Portland Cement Concrete Pavements
  • D7119/D7119M – 13a Standard Guide for Sampling Spray Polyurethane Foam and Coating in Roofing
  • D7120/D7120M – 10(2017) Standard Guide for Evaluation and Preparation of Roof Membranes for Coating Application
  • D7121 – 05(2012) Standard Test Method for Rubber Property—Resilience Using Schob Type Rebound Pendulum
  • D7122 – 17 Standard Specification for HCFC Blend B (CF3CCl2H, Ar, and CF4)
  • D7123 – 17 Standard Practice for Handling, Transportation, and Storage of HCFC Blend B (CF3CCl 2H, Ar, and CF4)
  • D7124 – 17 Standard Specification for Benzene for Use with Zeolite Based Catalysts
  • D7125 – 17 Standard Specification for Cumene (Isopropylbenzene) Manufactured Via a Zeolite Process
  • D7126 – 15 Standard Test Method for On-Line Colorimetric Measurement of Silica
  • D7127 – 17 Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument
  • D7128 – 05(2010) Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation
  • D7132 – 14 Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam
  • D7133 – 16 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids
  • D7134 – 05(2012) Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)
  • D7136/D7136M – 15 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
  • D7137/D7137M – 17 Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
  • D7138 – 16 Standard Test Method to Determine Melting Temperature of Synthetic Fibers
  • D7139 – 09(2013)e1 Standard Terminology for Cotton Fibers
  • D7140/D7140M – 13(2017) Standard Test Method to Measure Heat Transfer Through Textile Thermal Barrier Materials
  • D7142 – 05(2016) Standard Test Method for Holding Strength of Prong-Ring Attached Snap Fasteners
  • D7143 – 17 Standard Practice for Emission Cells for the Determination of Volatile Organic Emissions from Indoor Materials/Products
  • D7144 – 05a(2016) Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination
  • D7145 – 05(2015) Standard Guide for Measurement of Atmospheric Wind and Turbulence Profiles by Acoustic Means
  • D7147 – 11 Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers
  • D7148 – 13 Standard Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System
  • D7149 – 05(2016) Standard Practice for Determining the Freeze Thaw Stability of Adhesives
  • D7150 – 13 Standard Test Method for the Determination of Gassing Characteristics of Insulating Liquids Under Thermal Stress
  • D7151 – 15 Standard Test Method for Determination of Elements in Insulating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
  • D7152 – 11(2016) Standard Practice for Calculating Viscosity of a Blend of Petroleum Products
  • D7153 – 15e1 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
  • D7153-RUS – 15e1 Стандартный метод определения точки замерзания авиационного топлива (автоматический метод с применением лазера)
  • D7154 – 15 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)
  • D7155 – 11 Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils
  • D7156 – 17 Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine
  • D7157 – 12 Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase Separation; Optical Detection)
  • D7158/D7158M – 17 Standard Test Method for Wind Resistance of Asphalt Shingles (Uplift Force/Uplift Resistance Method)
  • D7160 – 16 Standard Practice for Determination of Expiration Dating for Medical Gloves
  • D7161 – 16 Standard Practice for Determination of Real Time Expiration Dating of Mature Medical Gloves Stored Under Typical Warehouse Conditions
  • D7163 – 11 Standard Test Method for Specular Gloss of Printed Matter
  • D7164 – 10(2015) Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography
  • D7165 – 10(2015) Standard Practice for Gas Chromatograph Based On-line/At-line Analysis for Sulfur Content of Gaseous Fuels
  • D7166 – 10(2015) Standard Practice for Total Sulfur Analyzer Based On-line/At-line for Sulfur Content of Gaseous Fuels
  • D7167 – 12 Standard Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant
  • D7168 – 16 Standard Test Method for 99Tc in Water by Solid Phase Extraction Disk
  • D7169 – 16 Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
  • D7169-RUS – 16 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ РАСПРЕДЕЛЕНИЯ ПО ТЕМПЕРАТУРАМ КИПЕНИЯ ПРОБ С ОСТАТКАМИ СЫРОЙ НЕФТИ, МАЗУТА И ГУДРОНА С ПОМОЩЬЮ ВЫСОКОТЕМПЕРАТУРНОЙ ГАЗОВОЙ ХРОМАТОГРАФИИ
  • D7170 – 16 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method
  • D7171 – 16 Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy
  • D7171-RUS – 16 Стандартный метод определения содержания водорода в среднедистиллятных нефтепродуктах методом импульсной ядерной магниторезонансной спектроскопии низкого разрешения
  • D7172 – 14 Standard Test Method for Determining the Relative Density (Specific Gravity) and Absorption of Fine Aggregates Using Infrared
  • D7173 – 14 Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt
  • D7174 – 05(2016) Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction
  • D7175 – 15 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
  • D7176 – 06(2011) Standard Specification for Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications
  • D7177/D7177M – 05(2015)e1 Standard Specification for Air Channel Evaluation of Polyvinyl Chloride (PVC) Dual Track Seamed Geomembranes
  • D7178 – 16e1 Standard Practice for Determining the Number of Constrictions “m” of Non-Woven Geotextiles as a Complementary Filtration Property
  • D7179 – 07(2013) Standard Test Method for Determining Geonet Breaking Force
  • D7180/D7180M – 05(2013)e1 Standard Guide for Use of Expanded Polystyrene (EPS) Geofoam in Geotechnical Projects
  • D7181 – 11 Method for Consolidated Drained Triaxial Compression Test for Soils
  • D7183 – 16 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • D7183-RUS – 16 Стандартный метод определения общего содержания серы в ароматических углеводородах и родственных химических соединениях с помощью ультрафиолетовой флуоресценции
  • D7184 – 15 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
  • D7185 – 17 Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene
  • D7186 – 14 Standard Practice for Quality Assurance Observation of Roof Construction and Repair
  • D7187 – 15 Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching
  • D7188 – 05(2010) Standard Terminology for Printing Inks, Materials, and Processes
  • D7189 – 12 Standard Test Method for Relative Mileage of News Ink on Newsprint
  • D7190 – 10(2015) Standard Practice to Evaluate Leaching of Water-Soluble Materials from Latex Paint Films
  • D7191 – 10 Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor
  • D7191-RUS – 10 Стандартный метод определения влаги в пластмассах с помощью датчика относительной влажности
  • D7192 – 10 Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors
  • D7193 – 17 Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape
  • D7194 – 12 Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)
  • D7195 – 16a Standard Guide for Setting Object Color Specifications
  • D7196 – 16 Standard Test Method for Raveling Test of Cold Mixed Emulsified Asphalt Samples
  • D7197 – 13 Standard Table of Body Measurements for Misses Maternity Sizes Two to Twenty-Two (2-22)
  • D7198 – 05(2012) Standard Specification for Disposable Embalming Gloves for Single-Use Applications
  • D7199 – 07(2012) Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using Mechanics-Based Models
  • D7200 – 12 Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in Mines and Quarries, by Phase Contrast Microscopy and Transmission Electron Microscopy
  • D7201 – 06(2011) Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in the Workplace, by Phase Contrast Microscopy (with an Option of Transmission Electron Microscopy)
  • D7202 – 15 Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection
  • D7203 – 11(2017) Standard Practice for Screening Trichloroethylene (TCE)-Contaminated Media Using a Heated Diode Sensor
  • D7204 – 15 Standard Practice for Sampling Waste Streams on Conveyors
  • D7205/D7205M – 06(2016) Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
  • D7206/D7206M – 06(2013)e1 Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals
  • D7208 – 14 Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
  • D7210 – 13 Standard Practice for Extraction of Additives in Polyolefin Plastics
  • D7211 – 13 Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use
  • D7212 – 13 Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter
  • D7212-RUS – 13 Стандартный метод определения содержания микропримесей серы в топливах карбюраторных двигателей методом энергодисперсионной рентгенофлуоресцентной спектрометрии с использованием малофонового пропорционального счетчика
  • D7213 – 15 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 °C to 615 °C by Gas Chromatography
  • D7214 – 07a(2012) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
  • D7215 – 16 Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels
  • D7216 – 17 Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers
  • D7217 – 16 Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
  • D7219 – 08(2014) Standard Specification for Isotropic and Near-isotropic Nuclear Graphites
  • D7220 – 12(2017) Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry
  • D7223 – 17 Standard Specification for Aviation Certification Turbine Fuel
  • D7224 – 14 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer
  • D7225 – 13 Standard Guide for Blood Cleaning Efficiency of Detergents and Washer-Disinfectors
  • D7226 – 13(2017) Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
  • D7227/D7227M – 17 Standard Practice for Rapid Drying of Compacted Asphalt Mixture Specimens Using Vacuum Drying Apparatus
  • D7228 – 06a(2015) Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures
  • D7229 – 08(2013)e1 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor
  • D7230 – 06(2013) Standard Guide for Evaluating Polymeric Lining Systems for Water Immersion in Coating Service Level III Safety-Related Applications on Metal Substrates
  • D7232 – 06(2016) Standard Test Method for Rapid Determination of the Nonvolatile Content of Coatings by Loss in Weight
  • D7233 – 08(2017) Standard Test Method for Testing Fracture of Level Paintbrush Filaments
  • D7234 – 12 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
  • D7235 – 16 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
  • D7236 – 16a Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
  • D7237 – 15a Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
  • D7238 – 06(2017) Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
  • D7239 – 13 Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications
  • D7240 – 06(2011) Standard Practice for Leak Location using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer via Electrical Capacitance Technique (Conductive Geomembrane Spark Test)
  • D7241 – 13 Standard Test Method for Pile Thickness of Finished Multilevel Pile Yarn Floor Covering
  • D7242/D7242M – 06(2013)e1 Standard Practice for Field Pneumatic Slug (Instantaneous Change in Head) Tests to Determine Hydraulic Properties of Aquifers with Direct Push Groundwater Samplers
  • D7243 – 11 Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges
  • D7244 – 06a(2011) Standard Test Method for Relative Cure of Energy-Cured Inks and Coatings
  • D7245 – 09(2014) Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating
  • D7246 – 06(2015) Standard Test Method for Detection of Holes in Polyethylene Food Service Gloves
  • D7247 – 17 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
  • D7248/D7248M – 12(2017) Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
  • D7249/D7249M – 16e1 Standard Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure
  • D7250/D7250M – 16 Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness
  • D7251 – 11 Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products
  • D7252 – 17 Standard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates
  • D7253 – 16 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols
  • D7254 – 17 Standard Specification for Polypropylene (PP) Siding
  • D7255 – 14 Standard Test Method for Abrasion Resistance of Leather (Rotary Platform, Abraser Method)
  • D7257 – 06(2011) Standard Test Method for Automated Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions
  • D7258 – 17 Standard Specification for Polymeric Piles
  • D7260 – 17 Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants
  • D7261 – 17 Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer
  • D7262 – 10(2016)e1 Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids
  • D7263 – 09 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
  • D7264/D7264M – 15 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
  • D7265 – 12 Standard Specification for Hydrogen Thermophysical Property Tables
  • D7266 – 13(2018)e1 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)
  • D7267 – 13 Standard Test Method for Edge Ravel Resistance of Finished Loop Pile, Pile Yarn Floor Covering
  • D7268 – 14 Standard Performance Specification for Seamless Knit Garments Including Intimates and Swimwear
  • D7269/D7269M – 17 Standard Test Methods for Tensile Testing of Aramid Yarns
  • D7270 – 07(2013) Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings
  • D7271 – 06(2012) Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer
  • D7272 – 06(2011) Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Pre-manufactured Taped Methods
  • D7273/D7273M – 08(2013)e1 Standard Guide for for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites
  • D7274 – 06a(2011) Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (BGM)
  • D7275 – 07(2012) Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGM)
  • D7276 – 16 Standard Guide for Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow
  • D7277 – 16 Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow
  • D7278 – 16 Standard Guide for Prediction of Analyzer Sample System Lag Times
  • D7279 – 16 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
  • D7280 – 15 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration
  • D7281 – 07(2013) Standard Test Method for Determining Water Migration Resistance Through Roof Membranes
  • D7282 – 14 Standard Practice for Set-up, Calibration, and Quality Control of Instruments Used for Radioactivity Measurements
  • D7283 – 17 Standard Test Method for Alpha and Beta Activity in Water By Liquid Scintillation Counting
  • D7284 – 13(2017) Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection
  • D7285 – 06(2017) Standard Guide for Recordkeeping Microfiltration and Ultrafiltration Systems
  • D7290 – 06(2017) Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications
  • D7291/D7291M – 15 Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
  • D7292 – 12 Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)
  • D7293 – 12 Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)
  • D7294 – 13 Standard Guide for Collecting Treatment Process Design Data at a Contaminated Site—A Site Contaminated With Chemicals of Interest
  • D7295 – 11 Standard Practice for Sampling and Determination of Hydrogen Cyanide (HCN) in Combustion Effluents and Other Stationary Sources
  • D7296 – 12 Standard Practice for Collection of Settled Dust Samples Using Dry Wipe Sampling Methods for Subsequent Determination of Beryllium and Compounds
  • D7297 – 14 Standard Practice for Evaluating Residential Indoor Air Quality Concerns
  • D7298 – 06(2011)e1 Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
  • D7299 – 12 Standard Practice for Verifying Performance of a Vertical Inclinometer Probe
  • D7300 – 11 Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain
  • D7301 – 11(2015) Standard Specification for Nuclear Graphite Suitable for Components Subjected to Low Neutron Irradiation Dose
  • D7303 – 17 Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry
  • D7304 – 16 Standard Test Method for Determination of Denatonium Ion in Engine Coolant by HPLC
  • D7305 – 08a(2013) Standard Test Method for Reflection Density of Printed Matter
  • D7306 – 07(2017) Standard Practice for Testing Low Temperature Film-Formation of Latex Paints by Visual Observation
  • D7307 – 06(2016) Standard Practice for Sampling of Thermoplastic Traffic Marking Materials
  • D7308 – 17 Standard Practice for Sample Preparation of Thermoplastic Pavement Marking Materials
  • D7309 – 13 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
  • D7310 – 11 Standard Guide for Defect Detection and Rating of Plastic Films Using Optical Sensors
  • D7312 – 10 Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)
  • D7313 – 13 Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry
  • D7314 – 10(2015) Standard Practice for Determination of the Heating Value of Gaseous Fuels using Calorimetry and On-line/At-line Sampling
  • D7315 – 17 Standard Test Method for Determination of Turbidity Above 1 Turbidity Unit (TU) in Static Mode
  • D7316 – 14 Standard Guide for Interpretation of Existing Field Instrumentation to Influence Emergency Response Decisions
  • D7317 – 07(2013) Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)
  • D7318 – 13 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
  • D7319 – 17 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
  • D7320 – 17a Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine
  • D7321 – 16a Standard Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration
  • D7322/D7322M – 17 Standard Test Method for Determination of Erosion Control Product (ECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions
  • D7323 – 13 Standard Practice for Handling, Transportation, and Storage of IG-100 (Nitrogen)
  • D7324 – 13 Standard Practice for Handling, Transportation, and Storage of IG-55 Ar N2
  • D7325 – 13 Standard Practice for Handling, Transportation, and Storage of IG-541 N2, Ar , CO2
  • D7326 – 17 Standard Practice for Handling, Transportation, and Storage of HFC Blend B (CH2FCF3, CHF2 CF3, and CO2)
  • D7327 – 17 Standard Specification for HFC Blend B (CH2FCF3, CHF2CF3, and CO2)
  • D7328 – 17 Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
  • D7329 – 07(2012) Standard Specification for Food Preparation and Food Handling (Food Service) Gloves
  • D7330 – 15 Standard Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales
  • D7331 – 11 Standard Practice for Sewn Products Marker Data Interchange
  • D7332/D7332M – 16 Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite
  • D7334 – 08(2013) Standard Practice for Surface Wettability of Coatings, Substrates and Pigments by Advancing Contact Angle Measurement
  • D7336/D7336M – 16 Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials
  • D7337/D7337M – 12 Standard Test Method for Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars
  • D7338 – 14 Standard Guide for Assessment Of Fungal Growth in Buildings
  • D7339 – 12 Standard Test Method for Determination of Volatile Organic Compounds Emitted from Carpet using a Specific Sorbent Tube and Thermal Desorption / Gas Chromatography
  • D7340 – 07(2012)e1 Standard Practice for Thermal Conductivity of Leather
  • D7341 – 14 Standard Practice for Establishing Characteristic Values for Flexural Properties of Structural Glued Laminated Timber by Full-Scale Testing
  • D7342 – 15 Standard Test Method for Prolonged Worked Stability of Lubricating Grease in Presence of Water (Water Stability Test)
  • D7343 – 12(2017) Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
  • D7344 – 17 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Mini Method)
  • D7344-RUS – 17 СТАНДАРТНЫЙ МЕТОД ИСПЫТАНИЙ ПРОЦЕССА ДИСТИЛЛЯЦИИ НЕФТЕПРОДУКТОВ И ЖИДКИХ ТОПЛИВ ПРИ АТМОСФЕРНОМ ДАВЛЕНИИ (МИНИ-МЕТОД)
  • D7345 – 17 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)
  • D7346 – 15 Standard Test Method for No Flow Point and Pour Point of Petroleum Products and Liquid Fuels
  • D7347 – 15 Standard Test Method for Determination of Olefin Content in Denatured Ethanol by Supercritical Fluid Chromatography
  • D7348 – 13 Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues
  • D7349/D7349M – 15 Standard Test Method for Determining the Capability of Roofing and Waterproofing Materials to Seal around Fasteners
  • D7351 – 13 Standard Test Method for Determination of Sediment Retention Device Effectiveness in Sheet Flow Applications
  • D7352 – 07(2012) Standard Practice for Direct Push Technology for Volatile Contaminant Logging with the Membrane Interface Probe (MIP)
  • D7353 – 07(2013) Standard Practice for Sampling of Liquids in Waste Management Activities Using a Peristaltic Pump
  • D7354 – 11 Standard Guide for Artists’ Paint Waste Disposal in Private, Non-Commercial Settings
  • D7355 – 10 Standard Guide for Artists’ Paint Waste Disposal in Smaller Commercial or Educational Settings
  • D7356/D7356M – 13 Standard Test Method for Accelerated Acid Etch Weathering of Automotive Clearcoats Using a Xenon-Arc Exposure Device
  • D7357 – 07(2012) Standard Specification for Cellulose Fibers for Fiber-Reinforced Concrete
  • D7358 – 07(2013) Standard Test Method for Water Content of Paints by Quantitative Calcium Hydride Reaction Test Kit
  • D7359 – 14a Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
  • D7360 – 16 Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration
  • D7361 – 07(2012) Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
  • D7362 – 14 Standard Guide for Rapid Screening of Vegetation for Radioactive Strontium Aerial Deposition
  • D7363 – 13a Standard Test Method for Determination of Parent and Alkyl Polycyclic Aromatics in Sediment Pore Water Using Solid-Phase Microextraction and Gas Chromatography/Mass Spectrometry in Selected Ion Monitoring Mode
  • D7365 – 09a(2015) Standard Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of Cyanide
  • D7366 – 08(2013) Standard Practice for Estimation of Measurement Uncertainty for Data from Regression-based Methods
  • D7367 – 14 Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting
  • D7369 – 11 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test
  • D7370/D7370M – 14 Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion
  • D7371 – 14 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
  • D7372 – 17 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
  • D7373 – 12 Standard Test Method for Predicting Biodegradability of Lubricants Using a Bio-kinetic Model
  • D7374 – 08(2015) Standard Practice for Evaluating Elevated Temperature Performance of Adhesives Used in End-Jointed Lumber
  • D7376 – 10a(2016) Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals
  • D7377 – 09(2013) Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints using a Water Faucet
  • D7378 – 16 Standard Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness
  • D7379/D7379M – 08(2015)e1 Standard Test Methods for Strength of Modified Bitumen Sheet Material Laps Using Cold Process Adhesive
  • D7380 – 15 Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer
  • D7381 – 07(2013) Standard Practice for Establishing Allowable Stresses for Round Timbers for Piles from Tests of Full-Size Material
  • D7383 – 10 Standard Test Methods for Axial Compressive Force Pulse (Rapid) Testing of Deep Foundations
  • D7385 – 13 Standard Guide for Estimating Carbon Saturation by Temperature Rise upon Immersion
  • D7386 – 16 Standard Practice for Performance Testing of Packages for Single Parcel Delivery Systems
  • D7387 – 13 Standard Test Method for Vibration Testing of Intermediate Bulk Containers (IBCs) Used for Shipping Liquid Hazardous Materials (Dangerous Goods)
  • D7388 – 08(2013) Standard Specification for Engine Coolant Grade 1,3-Propanediol (PDO)
  • D7389 – 07(2012) Standard Test Method for Acid Number (Empirical) of Maleic Anhydride (MAH) Grafted Waxes
  • D7390 – 07(2012) Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments
  • D7391 – 17e1 Standard Test Method for Categorization and Quantification of Airborne Fungal Structures in an Inertial Impaction Sample by Optical Microscopy
  • D7392 – 07(2013) Standard Practice for PM Detector and Bag Leak Detector Manufacturers to Certify Conformance with Design and Performance Specifications for Cement Plants
  • D7393 – 16 Standard Practice for Indicating Oil in Abrasives
  • D7394 – 17 Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers
  • D7395 – 07(2012) Standard Test Method for Cone/Plate Viscosity at a 500 s-1 Shear Rate
  • D7396 – 14 Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting
  • D7397 – 17 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Miniaturized Optical Method)
  • D7398 – 11(2016) Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 °C to 615 °C by Gas Chromatography
  • D7400 – 17 Standard Test Methods for Downhole Seismic Testing
  • D7402 – 09(2017) Standard Practice for Identifying Cationic Emulsified Asphalts
  • D7403 – 09(2017) Standard Test Method for Determination of Residue of Emulsified Asphalt by Low-Temperature Vacuum Distillation
  • D7404 – 07(2016) Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
  • D7405 – 15 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
  • D7406 – 07(2012) Standard Test Method for Time-Dependent (Creep) Deformation Under Constant Pressure for Geosynthetic Drainage Products
  • D7407 – 07(2012) Standard Guide for Determining The Transmission of Gases Through Geomembranes
  • D7408 – 12 Standard Specification for Non Reinforced PVC (Polyvinyl Chloride) Geomembrane Seams
  • D7409 – 15 Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns
  • D7410 – 07(2012) Standard Practice for Qualification of Cotton Classification Instruments for Cotton Marketing
  • D7412 – 09 Standard Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • D7414 – 09 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • D7415 – 09 Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • D7416 – 09(2015) Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscometer) Integrated Tester
  • D7417 – 17 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
  • D7418 – 12 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
  • D7419 – 13 Standard Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection
  • D7419-RUS – 13 Стандартный метод определения общего содержания ароматических и насыщенных углеводородов в базовых маслах с использованием высокоэффективной жидкостной хроматографии (HPLC) и измерений показателя преломления
  • D7420 – 17 Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
  • D7421 – 16 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine
  • D7422 – 17a Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine
  • D7423 – 17 Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
  • D7423-RUS – 17 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ СОДЕРЖАНИЯ ОКСИГЕНАТОВ В МАТРИЦАХ УГЛЕВОДОРОДОВ C2, C3, C4И C5 С ПОМОЩЬЮ ГАЗОВОГО ХРОМАТОГРАФА И ПЛАМЕННОГО ИОНИЗАЦИОННОГО ДЕТЕКТОРА
  • D7425/D7425M – 13 Standard Specification for Spray Polyurethane Foam Used for Roofing Applications
  • D7426 – 08(2013) Standard Test Method for Assignment of the DSC Procedure for Determining Tg of a Polymer or an Elastomeric Compound
  • D7426-RUS – 08(2013) СТАНДАТНЫЙ МЕТОД ПРИМЕНЕНИЯ ПРОЦЕДУРЫ ДСК ДЛЯ ОПРЕДЕЛЕНИЯ Tg ПОЛИМЕРНОГО КОМПОЗИТА ИЛИ ЭЛАСТОМЕРНОГО КОМПАУНДА
  • D7427 – 16 Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Hevea Natural Rubber and Its Products Derived from Latex
  • D7428 – 15 Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
  • D7430 – 17 Standard Practice for Mechanical Sampling of Coal
  • D7433 – 13 Standard Test Method for Measuring Surface Water Absorption of Overlaid Wood-Based Panels
  • D7434 – 08(2014) Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Palletized or Unitized Loads
  • D7435 – 08(2014) Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Loaded Containers
  • D7436 – 17 Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology
  • D7437 – 08(2013) Standard Test Method for Temperature and Hard Water Stability of Engine Coolants
  • D7438 – 13 Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters
  • D7439 – 14 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry
  • D7440 – 08(2015)e1 Standard Practice for Characterizing Uncertainty in Air Quality Measurements
  • D7441 – 08(2013) Standard Practice for Separation of Beryllium from Other Metals in Digestion and Extraction Solutions from Workplace Dust Samples
  • D7442 – 16 Standard Practice for Sample Preparation of Fluid Catalytic Cracking Catalysts and Zeolites for Elemental Analysis by Inductively Coupled Plasma Optical Emission Spectroscopy
  • D7442-RUS – 16 Стандартная методика приготовления проб катализаторов флюид-каталитического крекинга и цеолитов для элементногоанализа с помощью оптико-эмиссионной спектроскопии с индуктивно связанной плазмой
  • D7444 – 11 Standard Practice for Heat and Humidity Aging of Oxidatively Degradable Plastics
  • D7445 – 17 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding)
  • D7446 – 09(2017) Standard Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core Materials
  • D7447 – 08(2014) Standard Practice for Symbolizing Adhesive Applications
  • D7448 – 16 Standard Practice for Establishing the Competence of Laboratories Using ASTM Procedures in the Sampling and Analysis of Coal and Coke
  • D7449/D7449M – 14 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Coaxial Air Line
  • D7450 – 13 Standard Specification for Performance of Rear Axle Gear Lubricants Intended for API Category GL-5 Service
  • D7451 – 16 Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark Ignition Fuels
  • D7452 – 17 Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading
  • D7453 – 17 Standard Practice for Sampling of Petroleum Products for Analysis by Process Stream Analyzers and for Process Stream Analyzer System Validation
  • D7454 – 14e1 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
  • D7455 – 14 Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis
  • D7457 – 12 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry
  • D7458 – 14 Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection
  • D7459 – 08(2016) Standard Practice for Collection of Integrated Samples for the Speciation of Biomass (Biogenic) and Fossil-Derived Carbon Dioxide Emitted from Stationary Emissions Sources
  • D7460 – 10 Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending
  • D7463 – 16e1 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water
  • D7464 – 14 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
  • D7465/D7465M – 15e1 Standard Specification for Ethylene Propylene Diene Terpolymer (EPDM) Sheet Used In Geomembrane Applications
  • D7466/D7466M – 10(2015)e1 Standard Test Method for Measuring Asperity Height of Textured Geomembranes
  • D7467 – 17 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
  • D7468 – 16 Standard Test Method for Cummins ISM Test
  • D7469 – 16 Standard Test Methods for End-Joints in Structural Wood Products
  • D7470 – 08(2015) Standard Practice for Evaluating Elevated Temperature Performance of End-Jointed Lumber Studs
  • D7471 – 09(2014) Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials
  • D7472 – 09(2014) Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials
  • D7473 – 12 Standard Test Method for Weight Attrition of Plastic Materials in the Marine Environment by Open System Aquarium Incubations
  • D7474 – 17 Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents
  • D7475 – 11 Standard Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill Conditions
  • D7476 – 08(2013) Standard Test Method for Brine Saturation Value of Cured (Salt-Preserved) Hides and Skins
  • D7477 – 16 Standard Test Method for Determining the Area Stability of Wet Blue Submersed in Boiling Water
  • D7478/D7478M – 11(2017) Standard Specification for Heavy Duty Sheathed Wood Crates
  • D7480 – 08(2014) Standard Guide for Evaluating the Attributes of a Forest Management Plan
  • D7482 – 17 Standard Practice for Sampling, Storage, and Handling of Hydrocarbons for Mercury Analysis
  • D7483 – 13a(2017) Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
  • D7484 – 16 Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine
  • D7485 – 16 Standard Test Method for Determination of Nonylphenol, p-tert-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry
  • D7486 – 14 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
  • D7487 – 13e1 Standard Practice for Polyurethane Raw Materials: Polyurethane Foam Cup Test
  • D7488 – 11(2016) Standard Test Method for Open Time of Latex Paints
  • D7489 – 09(2017) Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions
  • D7490 – 13 Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements
  • D7491 – 08(2015) Standard Guide for Management of Non-Conforming Coatings in Coating Service Level I Areas of Nuclear Power Plants
  • D7492/D7492M – 16a Standard Guide for Use of Drainage System Media with Waterproofing Systems
  • D7493 – 14 Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection
  • D7495 – 12 Standard Specification for Minimum Requirements for Accreditation Bodies that Accredit Agencies Testing and Inspecting Road and Paving Materials
  • D7496 – 17 Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer
  • D7497 – 09(2016) Standard Practice for Recovering Residue from Emulsified Asphalt Using Low Temperature Evaporative Technique
  • D7498/D7498M – 09(2014)e1 Standard Test Method for Vertical Strip Drains Using a Large Scale Consolidation Test
  • D7499/D7499M – 09(2014) Standard Test Method for Measuring Geosynthetic-Soil Resilient Interface Shear Stiffness
  • D7500 – 15 Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100 °C to 735 °C by Gas Chromatography
  • D7500-RUS – 15 Стандартный метод определения температурных интервалов кипения дистиллятов и базовых смазочных масел с интервалом кипения от 100 °C до 735 °C с помощью газовой хроматографии
  • D7501 – 12a(2017) Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)
  • D7503 – 10 Standard Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils
  • D7504 – 17a Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
  • D7505/D7505M – 17 Standard Specification for Self-Adhesive Polyester Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules
  • D7506/D7506M – 17 Standard Test Method for Pocket Reinforcement
  • D7507 – 14 Standard Specification for Woven High Stretch Fabrics Used in Apparel
  • D7508/D7508M – 10(2015) Standard Specification for Polyolefin Chopped Strands for Use in Concrete
  • D7509 – 09(2015) Standard Specification for Fluorocarbon Feedstock Grade Chloroform
  • D7510 – 10(2016)e1 Standard Practice for Performing Detection and Quantitation Estimation and Data Assessment Utilizing DQCALC Software, based on ASTM Practices D6091 and D6512 of Committee D19 on Water
  • D7511 – 12(2017)e1 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
  • D7512 – 09(2015) Standard Guide for Monitoring of Suspended-Sediment Concentration in Open Channel Flow Using Optical Instrumentation
  • D7513 – 17 Standard Test Method for Capacity of Mixed Bed Ion Exchange Cartridges
  • D7514 – 14 Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment
  • D7515 – 09(2014) Standard Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method)
  • D7517 – 09(2014) Standard Specification for Fully-Formulated 1,3 Propanediol (PDO) Base Engine Coolant for Heavy-Duty Engines
  • D7518 – 10(2015)e1 Standard Specification for 1,3 Propanediol (PDO) Base Engine Coolant for Automobile and Light-Duty Service
  • D7519 – 11 Standard Test Method for Internal Bond Strength and Thickness Swell of Cellulosic-Based Fiber and Particle Panels After Repeated Wetting
  • D7520 – 16 Standard Test Method for Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere
  • D7521 – 16 Standard Test Method for Determination of Asbestos in Soil
  • D7522/D7522M – 15 Standard Test Method for Pull-Off Strength for FRP Laminate Systems Bonded to Concrete Substrate
  • D7524 – 10(2015) Standard Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels—High Performance Liquid Chromatograph (HPLC) Method
  • D7525 – 14 Standard Test Method for Oxidation Stability of Spark Ignition Fuel—Rapid Small Scale Oxidation Test (RSSOT)
  • D7527 – 10 Standard Test Method for Measurement of Antioxidant Content in Lubricating Greases by Linear Sweep Voltammetry
  • D7528 – 17a Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus
  • D7530/D7530M – 17 Standard Specification for Self-Adhesive Glass Fiber Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules
  • D7532 – 09(2016) Standard Practice for Determination of Re-tack Ability of Carpet Adhesives
  • D7535 – 09(2015) Standard Test Method for Lead-210 in Water
  • D7536 – 16 Standard Test Method for Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
  • D7536-RUS – 16 Стандартный метод испытаний для определения хлора в ароматических углеводородах с помощью монохроматической рентгенофлуоресцентной спектрометрии с дисперсией по длинам волн
  • D7538 – 09(2013) Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device
  • D7539 – 10(2015) Standard Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints
  • D7540 – 09(2013) Standard Practice for Dispersion of Chromatic Pigments with a Mechanical Muller
  • D7541 – 11(2015) Standard Practice for Estimating Critical Surface Tensions
  • D7542 – 15 Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime
  • D7544 – 12(2017) Standard Specification for Pyrolysis Liquid Biofuel
  • D7545 – 14 Standard Test Method for Oxidation Stability of Middle Distillate Fuels—Rapid Small Scale Oxidation Test (RSSOT)
  • D7546 – 15 Standard Test Method for Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor
  • D7547 – 17a Standard Specification for Hydrocarbon Unleaded Aviation Gasoline
  • D7548 – 16a Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products
  • D7549 – 17 Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure
  • D7551 – 10(2015) Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence
  • D7552 – 09(2014) Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer
  • D7553 – 15 Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide
  • D7556 – 10 Standard Test Methods for Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests
  • D7557/D7557M – 09(2013)e1 Standard Practice for Sampling of Expanded Polystyrene Geofoam Specimens
  • D7558 – 09(2014) Standard Test Method for Colorimetric/Spectrophotometric Procedure to Quantify Extractable Chemical Dialkyldithiocarbamate, Thiuram, and Mercaptobenzothiazole Accelerators in Natural Rubber Latex and Nitrile Gloves
  • D7559/D7559M – 09(2014) Standard Test Method for Determining Pressure Decay of Inflatable Restraint Cushions
  • D7560 – 16 Standard Test Method for Determination of Fiber Length Percentages in Hydraulic Erosion Control Products (HECPs)
  • D7563 – 10(2016) Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel
  • D7564/D7564M – 16 Standard Practice for Construction of Asphalt-Rubber Cape Seal
  • D7565/D7565M – 10(2017) Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures
  • D7566 – 17a Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
  • D7568 – 17 Standard Specification for Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor Applications
  • D7569/D7569M – 10(2015)e1 Standard Practice for Determination of Gas Content of Coal—Direct Desorption Method
  • D7570 – 17 Standard Test Method for Evaluation of Dimensional Stability of Pile Yarn Floor Covering
  • D7571 – 10(2014)e1 Standard Specification for Retained Sewn Seam Strength After Exposures to Hot Air and Open Flame
  • D7572 – 15 Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil
  • D7573 – 09(2017) Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection
  • D7574 – 16 Standard Test Method for Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry
  • D7575 – 11(2017) Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
  • D7576 – 16 Standard Test Method for Determination of Benzene and Total Aromatics in Denatured Fuel Ethanol by Gas Chromatography
  • D7577 – 12(2016) Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends
  • D7578 – 15 Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants
  • D7579 – 09(2013) Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol
  • D7580/D7580M – 09(2014) Standard Test Method for Rotary Stretch Wrapper Method for Determining the Readability of Passive RFID Transponders on Homogenous Palletized or Unitized Loads
  • D7582 – 15 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
  • D7582-RUS – 15 Стандартные методы технического анализа угля и кокса с помощью макротермогравиметрической системы
  • D7583 – 16 Standard Test Method for John Deere Coolant Cavitation Test
  • D7584 – 16 Standard Test Method for Evaluating the Resistance of the Surface of Wet Blue and Wet White to the Growth of Fungi in an Environmental Chamber
  • D7585/D7585M – 10(2015) Standard Practice for Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments
  • D7586/D7586M – 11 Standard Test Method for Quantification of Air Intrusion in Low-Sloped Mechanically Attached Membrane Roof Assemblies
  • D7588 – 11 Standard Guide for FT-IR Fingerprinting of a Non-Aqueous Liquid Paint as Supplied in the Manufacturer’s Container
  • D7589 – 16 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine
  • D7590 – 09(2014) Standard Guide for Measurement of Remaining Primary Antioxidant Content In In-Service Industrial Lubricating Oils by Linear Sweep Voltammetry
  • D7591 – 12(2017) Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography
  • D7593 – 14 Standard Test Method for Determination of Fuel Dilution for In-Service Engine Oils by Gas Chromatography
  • D7594 – 16 Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
  • D7596 – 14 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
  • D7597 – 16(2017) Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Water by Liquid Chromatography/Tandem Mass Spectrometry
  • D7598 – 16(2017) Standard Test Method for Determination of Thiodiglycol in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry
  • D7599 – 16(2017) Standard Test Method for Determination of Diethanolamine, Triethanolamine, N-Methyldiethanolamine and N-Ethyldiethanolamine in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
  • D7600 – 16(2017) Standard Test Method for Determination of Aldicarb, Carbofuran, Oxamyl and Methomyl by Liquid Chromatography/Tandem Mass Spectrometry
  • D7601 – 10 Standard Practice for Pressure Driven Membrane Separation Element/Bundle Evaluation
  • D7602 – 11(2017) Standard Practice for Installation of Vulcanized Rubber Linings
  • D7603 – 13 Standard Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils
  • D7605 – 11(2016) Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
  • D7606 – 17 Standard Practice for Sampling of High Pressure Hydrogen and Related Fuel Cell Feed Gases
  • D7607/D7607M – 11e1 Standard Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method)
  • D7607/D7607M-RUS – 11e1 Стандартный метод анализа кислорода в газообразном топливе (метод электрохимического датчика)
  • D7608 – 10 Standard Test Method for Torsional Ring Shear Test to Determine Drained Fully Softened Shear Strength and Nonlinear Strength Envelope of Cohesive Soils (Using Normally Consolidated Specimen) for Slopes with No Preexisting Shear Surfaces
  • D7611/D7611M – 13e1 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification
  • D7612 – 10(2015) Standard Practice for Categorizing Wood and Wood-Based Products According to Their Fiber Sources
  • D7613 – 17 Standard Specification for Flexible Polypropylene Reinforced (fPP-R) and Nonreinforced (fPP) Geomembranes
  • D7614 – 12 Standard Test Method for Determination of Total Suspended Particulate (TSP) Hexavalent Chromium in Ambient Air Analyzed by Ion Chromatography (IC) and Spectrophotometric Measurements
  • D7615/D7615M – 11 Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates
  • D7616/D7616M – 11(2017) Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures
  • D7617/D7617M – 11(2017) Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars
  • D7618 – 13(2017) Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel
  • D7619 – 17 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
  • D7620 – 10(2015) Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
  • D7621 – 16 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
  • D7621-RUS – 16 Стандартный метод определения содержания сероводорода в нефтяном топливе с помощью быстрой жидкофазной экстракции
  • D7622 – 10(2015) Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
  • D7623 – 10(2015) Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
  • D7624 – 10 Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • D7625 – 10 Standard Test Method for Laboratory Determination of Abrasiveness of Rock Using the CERCHAR Method
  • D7626 – 10 Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay
  • D7633 – 13 Standard Test Method for Carbon Black—Carbon Content
  • D7634 – 10(2017) Standard Test Method for Visualizing Particulate Sizes and Morphology of Particles Contained in Hydrogen Fuel by Microscopy
  • D7635/D7635M – 10 Standard Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement
  • D7636/D7636M – 11 Standard Practice for Sampling and Analysis of Modified Bitumen Roof Systems
  • D7637 – 10(2015) Standard Test Method for Determination of Glycerin Assay by Titration (Sodium Meta Periodate)
  • D7638 – 10(2015) Standard Test Method for Determination of Fatty Acids and Esters in Glycerin
  • D7639 – 10(2014) Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence
  • D7640 – 16 Standard Specification for Engine Coolant Grade Glycerin
  • D7640-RUS – 16 Стандартная спецификация на глицерин для охлаждающей жидкости двигателя
  • D7641 – 10(2014)e1 Standard Guide for Textile Fibers
  • D7642 – 12 Standard Practice for Establishment of Calibration Cottons for Cotton Classification Instruments
  • D7643 – 16 Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders
  • D7644 – 16 Standard Test Method for Determination of Bromadiolone, Brodifacoum, Diphacinone and Warfarin in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
  • D7645 – 16 Standard Test Method for Determination of Aldicarb, Aldicarb Sulfone, Aldicarb Sulfoxide, Carbofuran, Methomyl, Oxamyl, and Thiofanox in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
  • D7646 – 10(2014) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
  • D7647 – 10 Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction
  • D7648 – 12 Standard Practice for Active Soil Gas Sampling for Direct Push or Manual-Driven Hand-Sampling Equipment
  • D7649 – 10(2017) Standard Test Method for Determination of Trace Carbon Dioxide, Argon, Nitrogen, Oxygen and Water in Hydrogen Fuel by Jet Pulse Injection and Gas Chromatography/Mass Spectrometer Analysis
  • D7650 – 13 Standard Test Method for Sampling of Particulate Matter in High Pressure Hydrogen used as a Gaseous Fuel with an In-Stream Filter
  • D7651 – 17 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
  • D7652 – 11 Standard Test Method for Determination of Trace Hydrogen Sulfide, Carbonyl Sulfide, Methyl Mercaptan, Carbon Disulfide and Total Sulfur in Hydrogen Fuel by Gas Chromatography and Sulfur Chemiluminescence Detection
  • D7652-RUS – 11 Стандартный метод определения содержания микропримесей сероводорода, карбонилсульфида, метилмеркаптана и сероуглерода, а также общего содержания серы в водородном топливе с помощью газовой хроматографии и хемилюминесцентного датчика серы
  • D7653 – 10 Standard Test Method for Determination of Trace Gaseous Contaminants in Hydrogen Fuel by Fourier Transform Infrared (FTIR) Spectroscopy
  • D7654/D7654M – 10 Standard Specification for Asphalt Used in Roofing Measured by Dynamic Shear Rheometer
  • D7655/D7655M – 12(2017) Standard Classification for Size of Aggregate Used as Ballast for Membrane Roof Systems
  • D7658 – 17 Standard Test Method for Direct Microscopy of Fungal Structures from Tape
  • D7659 – 10(2015) Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection
  • D7660 – 10 Standard Guide for Conducting Internal Pressure Tests on United Nations (UN) Packagings
  • D7661 – 10(2017) Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms
  • D7662 – 15 Standard Test Method for Carbon Content in Carbon Black Feedstock Oils
  • D7663 – 12 Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations
  • D7664 – 10 Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils
  • D7665 – 17 Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids
  • D7666 – 12 Standard Specification for Triglyceride Burner Fuel
  • D7667 – 10(2015) Standard Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin Silver Strip Method
  • D7668 – 17 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
  • D7669 – 15 Standard Guide for Practical Lubricant Condition Data Trend Analysis
  • D7670 – 10(2017) Standard Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters
  • D7671 – 10(2015) Standard Test Method for Corrosiveness to Silver by Automotive Spark–Ignition Engine Fuel–Silver Strip Method
  • D7672 – 14 Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies
  • D7673/D7673M – 15 Standard Specification for Halon 1211, Bromochlorodifluoromethane (CF2BrCl)
  • D7674 – 14a Standard Test Method for Hexane/Petroleum Ether Extract in Wet Blue and Wet White
  • D7675 – 15 Standard Test Method for Determination of Total Hydrocarbons in Hydrogen by FID-Based Total Hydrocarbon (THC) Analyzer
  • D7677 – 16 Standard Test Method for the Continuous Measurement of Dissolved Ozone in Low Conductivity Water
  • D7678 – 17 Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy
  • D7679 – 16 Standard Test Method for Sulfur Content in Carbon Black Feedstock Oils
  • D7680 – 10 Standard Practice for Preparing Prints of Paste Printing Inks by a Motor-Driven Printability Tester
  • D7681 – 11(2016) Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer
  • D7682 – 17 Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty
  • D7683 – 17 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Small Test Jar Method)
  • D7684 – 11(2016) Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants
  • D7685 – 11(2016) Standard Practice for In-Line, Full Flow, Inductive Sensor for Ferromagnetic and Non-ferromagnetic Wear Debris Determination and Diagnostics for Aero-Derivative and Aircraft Gas Turbine Engine Bearings
  • D7686 – 11 Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument
  • D7687 – 17 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
  • D7688 – 11(2016) Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by Visual Observation
  • D7689 – 17 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Mini Method)
  • D7690 – 11(2017) Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography
  • D7691 – 16 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
  • D7693/D7693M – 15 Standard Guide for Application of Heat Weldable Modified Bituminous Waterproofing Membranes Systems for New Concrete Decks
  • D7698 – 11a Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method
  • D7699/D7699M – 11 Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Problem Areas, Planning Units, Keyword Features, and Project Sites
  • D7700 – 15 Standard Guide for Selecting Test Methods for Geomembrane Seams
  • D7701 – 11 Standard Test Method for Determining the Flow Rate of Water and Suspended Solids from a Geotextile Bag
  • D7702/D7702M – 14 Standard Guide for Considerations When Evaluating Direct Shear Results Involving Geosynthetics
  • D7703 – 16 Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Lance Method
  • D7704 – 16 Standard Test Method for Total Aldehydes in Styrene Monomer by Potentiometric Titration
  • D7705/D7705M – 12 Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction
  • D7706 – 17 Standard Practice for Rapid Screening of VOC Emissions from Products Using Micro-Scale Chambers
  • D7707 – 11(2016) Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust
  • D7708 – 14 Standard Test Method for Microscopical Determination of the Reflectance of Vitrinite Dispersed in Sedimentary Rocks
  • D7709 – 12(2017) Standard Test Methods for Measuring Water Vapor Transmission Rate (WVTR) of Pharmaceutical Bottles and Blisters
  • D7710 – 14 Standard Test Method for Determination of Volume and Density of Rigid and Irregularly Shaped Molded Cellular Materials
  • D7711 – 11(2015) Standard Guide for Description of Polymer Pellet Defects
  • D7712 – 11e1 Standard Terminology for Sampling and Analysis of Asbestos
  • D7713 – 12 Standard Specification for Aqueous Engine Coolant Grade Glycol (53% Nominal)
  • D7714 – 11(2016)e1 Standard Specification for Glycerin Base Engine Coolant for Automobile and Light-Duty Service
  • D7714-RUS – 11(2016)e1 Стандартная спецификация на охлаждающую жидкость на основе глицерина для двигателей автомобилей и легких условий эксплуатации
  • D7715 – 12(2016)e1 Standard Specification for Fully-Formulated Glycerin Base Engine Coolant for Heavy-Duty Engines
  • D7715-RUS – 12(2016)e1 Стандартная спецификация на готовую к употреблению охлаждающую жидкость на основе глицерина для двигателей, работающих в тяжелых условиях
  • D7716 – 11a Standard Test Method for Determination of Residual Methanol in Glycerin by Gas Chromatography
  • D7717 – 11(2017) Standard Practice for Preparing Volumetric Blends of Denatured Fuel Ethanol and Gasoline Blendstocks for Laboratory Analysis
  • D7718 – 11 Standard Practice for Obtaining In-Service Samples of Lubricating Grease
  • D7719 – 17 Standard Specification for High Aromatic Content Unleaded Hydrocarbon Aviation Gasoline
  • D7720 – 11(2017) Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination
  • D7721 – 17 Standard Practice for Determining the Effect of Fluid Selection on Hydraulic System or Component Efficiency
  • D7722 – 17 Standard Terminology Relating to Industrial Textile Stitches and Seams
  • D7723 – 17 Standard Test Method for Rubber Property—Macro-Dispersion of Fillers in Compounds
  • D7724 – 11(2016) Standard Test Method for Carbon Black—Non-Dispersible Matter by Mechanical Flushing (NDM)
  • D7725 – 12 Standard Test Method for the Continuous Measurement of Turbidity Above 1 Turbidity Unit (TU)
  • D7726 – 11(2016)e1 Standard Guide for The Use of Various Turbidimeter Technologies for Measurement of Turbidity in Water
  • D7727 – 11(2016) Standard Practice for Calculation of Dose Equivalent Xenon (DEX) for Radioactive Xenon Fission Products in Reactor Coolant
  • D7728 – 11 Standard Guide for Selection of ASTM Analytical Methods for Implementation of International Cyanide Management Code Guidance
  • D7729 – 12 Standard Practice for Determining and Expressing Precision of Measurement Results, in the Analysis of Water, as Relative Standard Deviation, Utilizing DQCALC Software
  • D7730 – 11 Standard Test Method for Determination of Dioctyl Sulfosuccinate in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
  • D7731 – 11e1 Standard Test Method for Determination of Dipropylene Glycol Monobutyl Ether and Ethylene Glycol Monobutyl Ether in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
  • D7733 – 12(2016) Standard Specification for Acrylic Dispersion Ground
  • D7734/D7734M – 13 Standard Test Method for Determination of Open Time of Oxidative Printing Inks and Overprint Varnishes by a Manual Method
  • D7735 – 17 Standard Test Method for Type A Durometer Hardness Testing of Thermoplastic Pavement Marking at Elevated Temperatures
  • D7736 – 12 Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol
  • D7737/D7737M – 15 Standard Test Method for Individual Geogrid Junction Strength
  • D7739 – 11(2016) Standard Practice for Thermal Oxidative Stability Measurement via Quartz Crystal Microbalance
  • D7740 – 11(2016) Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants
  • D7741/D7741M – 11(2017) Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Handheld Viscometer
  • D7742 – 11 Standard Practice for Determination of Nonylphenol Polyethoxylates (NPnEO, 3 ≤ n ≤ 18) and Octylphenol Polyethoxylates (OPnEO, 2 ≤ n ≤ n ≤ 12 in Water by Single Reaction Monitoring (SRM) Liquid Chromatography/ Tandem Mass Spe
  • D7743 – 12 Standard Test Method for Measuring the Minimum Fluidization Velocities of Free Flowing Powders
  • D7744/D7744M – 11 Standard Test Methods for Tensile Testing of High Performance Polyethylene Tapes
  • D7745 – 11 Standard Practice for Testing Pultruded Composites
  • D7746 – 11(2016) Standard Practice for Calculating the Superimposed Load on Wood-frame Floor-Ceiling Assemblies for Standard Fire-Resistance Tests
  • D7747/D7747M – 11e1 Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Strip Tensile Method
  • D7748/D7748M – 14e1 Standard Test Method for Flexural Rigidity of Geogrids, Geotextiles and Related Products
  • D7749 – 11 Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Grab Method
  • D7750 – 12(2017) Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
  • D7751 – 16 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
  • D7751-RUS – 16 СТАНДАРТНЫЙ МЕТОД ИСПЫТАНИЙ ДЛЯ ОПРЕДЕЛЕНИЯ ЭЛЕМЕНТОВ ПРИСАДОК В СМАЗОЧНЫХ МАСЛАХ МЕТОДОМ ЭНЕРГОРАССЕИВАЮЩЕГО РЕНТГЕНО- ФЛУОРЕСЦЕНТНОГО АНАЛИЗА
  • D7752 – 11 Standard Practice for Evaluating Compatibility of Mixtures of Hydraulic Fluids
  • D7753 – 12(2016) Standard Test Method for Hydrocarbon Types and Benzene in Light Petroleum Distillates by Gas Chromatography
  • D7754 – 16 Standard Test Method for Determination of Trace Oxygenates in Automotive Spark-Ignition Engine Fuel by Multidimensional Gas Chromatography
  • D7754-RUS – 16 СТАНДАРТНЫЙ МЕТОД ОПРЕДЕЛЕНИЯ СОДЕРЖАНИЯ МИКРОПРИМЕСЕЙ ОКСИГЕНАТОВ В ТОПЛИВЕ ДЛЯ АВТОМОБИЛЬНЫХ ДВИГАТЕЛЕЙ С ИСКРОВЫМ ЗАЖИГАНИЕМ С ПОМОЩЬЮ МНОГОМЕРНОЙ ГАЗОВОЙ ХРОМАТОГРАФИИ
  • D7755 – 11(2017) Standard Practice for Determining the Wear Volume on Standard Test Pieces Used by High-Frequency, Linear-Oscillation (SRV) Test Machine
  • D7756 – 13 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection
  • D7757 – 17 Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
  • D7758 – 17 Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations
  • D7759/D7759M – 14 Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration
  • D7760 – 12 Standard Test Method for Measurement of Hydraulic Conductivity of Tire Derived Aggregates Using a Rigid Wall Permeameter
  • D7762 – 11 Standard Practice for Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash
  • D7764 – 12 Standard Practice for Pre-Installation Acceptance Testing of Vibrating Wire Piezometers
  • D7765 – 12 Standard Practice for Use of Foundry Sand in Structural Fill and Embankments
  • D7766/D7766M – 16 Standard Practice for Damage Resistance Testing of Sandwich Constructions
  • D7767 – 11 Standard Test Method to Measure Volatiles from Radiation Curable Acrylate Monomers, Oligomers, and Blends and Thin Coatings Made from Them
  • D7768 – 12 Standard Test Method for Speciated Organic Volatile Content of Waterborne Multi-Component Coatings by Gas Chromatography
  • D7770 – 12 Standard Test Method for Collection of Volatile Organic Compounds Emitted During Simulated Manufacturing of Engineered Wood Products Via a Sealed Caul Plate Method
  • D7771 – 17a Standard Test Method for Determination of Benzo-α-Pyrene (BaP) Content in Carbon Black
  • D7772 – 15 Standard Test Method for Carbon Black Extractables – Absorbance of Cyclohexane Extract
  • D7773 – 12 Standard Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO3 ) Using Filter Sampling and Suppressed Ion Chromatography
  • D7774 – 17 Standard Test Method for Flexural Fatigue Properties of Plastics
  • D7775 – 16 Standard Guide for Measurements on Small Graphite Specimens
  • D7777 – 13 Standard Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter
  • D7778 – 15 Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
  • D7779 – 11(2015) Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature
  • D7780 – 12 Standard Practice for Geospatial Data for Representing Coal Mining Features
  • D7781 – 14 Standard Test Method for Nitrite-Nitrate in Water by Nitrate Reductase
  • D7782 – 13 Standard Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data
  • D7783 – 13 Standard Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data
  • D7784 – 12 Standard Practice for the Rapid Assessment of Gamma-ray Emitting Radionuclides in Environmental Media by Gamma Spectrometry
  • D7785 – 12 Standard Test Method for Water in Lint Cotton by Oven Evaporation Combined with Volumetric Karl Fischer Titration
  • D7786 – 13 Standard Test Method for Determining Enamel Holdout
  • D7787/D7787M – 13 Standard Practice for Selecting Wood Substrates for Weathering Evaluations of Architectural Coatings
  • D7788 – 14 Standard Practice for Collection of Total Airborne Fungal Structures via Inertial Impaction Methodology
  • D7789 – 12 Standard Practice for Collection of Fungal Material from Surfaces by Swab
  • D7790 – 12 Standard Guide for Preparation of Plastic Packagings Containing Liquids for United Nations (UN) Drop Testing
  • D7791 – 17 Standard Test Method for Uniaxial Fatigue Properties of Plastics
  • D7792/D7792M – 15 Standard Practice for Freeze/Thaw Conditioning of Pultruded Fiber Reinforced Polymer (FRP) Composites Used in Structural Designs
  • D7793 – 17 Standard Specification for Insulated Vinyl Siding
  • D7794 – 14 Standard Practice for Blending Mid-Level Ethanol Fuel Blends for Flexible-Fuel Vehicles with Automotive Spark-Ignition Engines
  • D7795 – 15 Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration
  • D7796 – 17 Standard Test Method for Analysis of Ethyl tert-Butyl Ether (ETBE) by Gas Chromatography
  • D7797 – 17 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
  • D7798 – 15 Standard Test Method for Boiling Range Distribution of Petroleum Distillates with Final Boiling Points up to 538 °C by Ultra Fast Gas Chromatography (UF GC)
  • D7799 – 12a Standard Specification for Tufted and Woven Broadloom Carpet Adhesives Without Homogenous PVC or Non-PVC Backings
  • D7800/D7800M – 14 Standard Test Method for Determination of Elemental Sulfur in Natural Gas
  • D7801 – 17 Standard Terminology for Paint Brush Application Tools
  • D7802 – 12(2016) Standard Terminology for Paint Roller Application Tools
  • D7803 – 12 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating
  • D7804 – 12(2017) Standard Test Method for Fiber Shedding of Paint Roller Covers
  • D7805 – 13 Standard Terminology for Printing Ink Vehicles and Related Materials
  • D7806 – 12 Standard Test Method for Determination of the Fatty Acid Methyl Ester (FAME) Content of a Blend of Biodiesel and Petroleum-Based Diesel Fuel Oil Using Mid-Infrared Spectroscopy
  • D7807 – 12 Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection
  • D7807-RUS – 12 Стандартный метод определения интервала температур кипения углеводородных и серных компонентов нефтяных дистиллятов с помощью газовой хроматографии и хемилюминесцентного детекторного анализа
  • D7808 – 12 Standard Practice for Determining the Site Precision of a Process Stream Analyzer on Process Stream Material
  • D7811 – 13(2017) Standard Test Method for Bow and Skew Using a Measuring Tool
  • D7812 – 16 Standard Test Method for Tensile Testing of Aramid Paper
  • D7815 – 17 Standard Practice for Handling, Transportation, and Storage of Halon 1211, Bromochlorodifluoromethane (CF2BrCl)
  • D7816 – 12(2016) Standard Test Method for Enumeration of Halophilic and Proteolytic Bacteria in Raceway Brine, Brine-Cured Hides and Skins
  • D7817 – 12(2016) Standard Test Method for Enumeration of Yeast and Mold in Raceway Brine, Brine-Cured Hides and Skins
  • D7818 – 12(2016) Standard Test Method for Enumeration of Proteolytic Bacteria in Fresh (Uncured) Hides and Skins
  • D7819 – 12(2016) Standard Test Method for Enumeration of Yeast and Mold on Fresh (Uncured) Hides and Skins
  • D7820 – 12 Standard Test Method for Engine Coolant Corrosion Protection Under Accelerated Thermal and Oxidizing Conditions Using a Rotating Pressure Vessel
  • D7821 – 12 Standard Test Method for Field Test Determination of Urea Concentration in Diesel Exhaust Fluid (DEF)
  • D7822 – 13 Standard Practice for Dermal Wipe Sampling for the Subsequent Determination of Metals and Metalloids
  • D7823 – 16 Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption—Gas Chromatography/Mass Spectrometry
  • D7825 – 12 Standard Guide for Generating a Process Stream Property Value through the Application of a Process Stream Analyzer
  • D7826 – 17a Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
  • D7827 – 12(2017) Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene from Heavy Fuel Oils as Separability Number by an Optical Device
  • D7828 – 12 Standard Test Method for Determination of Residue Composition in Liquefied Petroleum Gas (LPG) Using Automated Thermal Desorption/Gas Chromatography (ATD/GC)
  • D7829 – 13e1 Standard Guide for Sediment and Water Determination in Crude Oil
  • D7830/D7830M – 14 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
  • D7831 – 13 Standard Practice for Sampling of Tanks by Field Personnel
  • D7832/D7832M – 14 Standard Guide for Performance Attributes of Waterproofing Membranes Applied to Below-Grade Walls / Vertical Surfaces (Enclosing Interior Spaces)
  • D7833 – 14 Standard Test Method for Determination of Hydrocarbons and Non-Hydrocarbon Gases in Gaseous Mixtures by Gas Chromatography
  • D7834 – 13 Standard Test Method for Filling Material Shedding of Paint Brushes
  • D7835/D7835M – 13 Standard Test Method for Determining the Solvent Resistance of an Organic Coating using a Mechanical Rubbing Machine
  • D7836 – 13 Standard Test Methods for Measurement of Yield Stress of Paints, Inks and Related Liquid Materials
  • D7840 – 12(2017) Standard Test Method for Foaming Tendencies of Non-Aqueous Engine Coolants in Glassware
  • D7841 – 13 Standard Practice for Sustainable Laundry Best Management Practices
  • D7842/D7842M – 12(2016) Standard Test Method for Holding Strength of Tack and Prong Fastener Attached Buttons
  • D7843 – 16 Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry
  • D7844 – 12 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
  • D7845 – 17 Standard Test Method for Determination of Chemical Species in Marine Fuel Oil by Multidimensional Gas Chromatography/Mass Spectrometry
  • D7846 – 16 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites
  • D7847 – 17 Standard Guide for Interlaboratory Studies for Microbiological Test Methods
  • D7849 – 14 Standard Classification for Nomenclature of Reference Materials of Committee D24
  • D7850 – 13 Standard Specification for Biological Properties of Industry Reference Materials (IRM)
  • D7851 – 17 Standard Guide for Design of Sustainable, Low-Slope Roofing Systems
  • D7852 – 13 Standard Practice for Use of an Electrically Conductive Geotextile for Leak Location Surveys
  • D7853 – 13 Standard Test Method for Hydraulic Pullout Resistance of a Geomembrane with Locking Extensions Embedded in Concrete
  • D7854 – 16 Standard Test Method for Carbon Black-Void Volume at Mean Pressure
  • D7855/D7855M – 13(2017) Standard Test Method for Determination of Mold Growth on Coated Building Products Designed for Interior Applications Using an Environmental Chamber and Indirect Inoculation
  • D7856 – 15a Standard Specification for Color and Appearance Retention of Solid and Variegated Color Plastic Siding Products using CIELab Color Space
  • D7857 – 16 Standard Test Method for Evaluating the Flexural Properties and Internal Bond Strength of Fire-Retarded Mat-Formed Wood Structural Composite Panels Exposed to Elevated Temperatures
  • D7858 – 13 Standard Test Method for Determination of Bisphenol A in Soil, Sludge and Biosolids by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry
  • D7859 – 13e1 Standard Practice for Spraying, Sampling, Packaging, and Test Specimen Preparation of Spray Polyurethane Foam (SPF) Insulation for Testing of Emissions Using Environmental Chambers
  • D7860 – 14 Standard Test Methods for Measurement of Torque Retention for Child Resistant and Non-Child Resistant Packages with Continuous Thread Closures Using Automated Torque Testing Equipment
  • D7861 – 14e1 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
  • D7862 – 17 Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel
  • D7863 – 17 Standard Guide for Evaluation of Convective Heat Transfer Coefficient of Liquids
  • D7864/D7864M – 15 Standard Test Method for Determining the Aperture Stability Modulus of Geogrids
  • D7865 – 13 Standard Guide for Identification, Packaging, Handling, Storage and Deployment of Fabricated Geomembrane Panels
  • D7866 – 14a Standard Specification for Radiation Attenuating Protective Gloves
  • D7867 – 13 Standard Test Methods for Measurement of the Rotational Viscosity of Paints, Inks and Related Liquid Materials as a Function of Temperature
  • D7868 – 13(2017) Standard Practice for Determining the Dry Fall (Fog) Properties of Protective Coatings
  • D7869 – 17 Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings
  • D7870/D7870M – 13 Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure
  • D7871 – 18 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number)
  • D7872 – 13 Standard Test Method for Determining the Concentration of Pipeline Drag Reducer Additive in Aviation Turbine Fuels
  • D7873 – 13(2017) Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120 °C Without the Inclusion of Water (Dry TOST Method)
  • D7874 – 13 Standard Guide for Applying Failure Mode and Effect Analysis (FMEA) to In-Service Lubricant Testing
  • D7875 – 14 Standard Test Method for Determination of Butanol and Acetone Content of Butanol for Blending with Gasoline by Gas Chromatography
  • D7876 – 13 Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants
  • D7877 – 14 Standard Guide for Electronic Methods for Detecting and Locating Leaks in Waterproof Membranes
  • D7878/D7878M – 13e1 Standard Tables for Body Measurements for Adult Female Misses Petite Figure Type, Size Range 00P – 20P
  • D7879 – 13 Standard Test Method for Determining Flax Fiber Widths Using Image Analysis
  • D7880/D7880M – 13 Standard Test Method for Determining Flow Rate of Water and Suspended Solids Retention from a Closed Geosynthetic Bag
  • D7881 – 13 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Reverse Voltage Mode
  • D7882 – 13 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Normal Voltage Mode
  • D7883 – 13 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Weak Anion Exchange High Performance Liquid Chromatography
  • D7884 – 13 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Reverse Phase High Performance Liquid Chromatography
  • D7886 – 14 Standard Practice for Asbestos Exposure Assessments for Repetitive Maintenance and Installation Tasks
  • D7887 – 13 Standard Guide for Selection of Substitute, Non-hazardous, Liquid Filling Substances for Packagings Subjected to the United Nations Performance Tests
  • D7888 – 13 Standard Practice for Evaluating Adhesive and the Effects of Plasticizer Found Within Polyvinyl Chloride-Backed Floor Coverings
  • D7889 – 13 Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy
  • D7891 – 15 Standard Test Method for Shear Testing of Powders Using the Freeman Technology FT4 Powder Rheometer Shear Cell
  • D7892 – 15 Standard Test Method for Determination of Total Organic Halides, Total Non-Methane Hydrocarbons, and Formaldehyde in Hydrogen Fuel by Gas Chromatography/Mass Spectrometry
  • D7893 – 13 Standard Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products
  • D7894/D7894M – 14 Standard Test Method for Thermal Endurance of Coating Powders Used for Integral Bus Bar Insulation Systems
  • D7895/D7895M – 14 Standard Test Method for Thermal Endurance of Coating Powders Used for Powder Coating Insulation Systems
  • D7896 – 14 Standard Test Method for Thermal Conductivity, Thermal Diffusivity and Volumetric Heat Capacity of Engine Coolants and Related Fluids by Transient Hot Wire Liquid Thermal Conductivity Method
  • D7897 – 15 Standard Practice for Laboratory Soiling and Weathering of Roofing Materials to Simulate Effects of Natural Exposure on Solar Reflectance and Thermal Emittance
  • D7898 – 14 Standard Practice for Lubrication and Hydraulic Filter Debris Analysis (FDA) for Condition Monitoring of Machinery
  • D7899 – 13 Standard Test Method for Measuring the Merit of Dispersancy of In-Service Engine Oils with Blotter Spot Method
  • D7900 – 17 Standard Test Method for Determination of Light Hydrocarbons in Stabilized Crude Oils by Gas Chromatography
  • D7901 – 14b Standard Specification for Dimethyl Ether for Fuel Purposes
  • D7902 – 16 Standard Terminology for Radiochemical Analyses
  • D7903 – 14 Standard Practice for Determining the Capacity of Oxygen Removal Ion Exchange Cartridges
  • D7904 – 15 Standard Test Method for Determination of Water Vapor (Moisture Concentration) in Natural Gas by Tunable Diode Laser Spectroscopy (TDLAS)
  • D7905/D7905M – 14 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
  • D7906 – 14 Standard Practice for Recovery of Asphalt from Solution Using Toluene and the Rotary Evaporator
  • D7907 – 14 Standard Test Methods for Determination of Bactericidal Efficacy on the Surface of Medical Examination Gloves
  • D7909 – 14 Standard Guide for Placement of Blind Actual Leaks during Electrical Leak Location Surveys of Geomembranes
  • D7910 – 14 Standard Practice for Collection of Fungal Material From Surfaces by Tape Lift
  • D7911 – 14 Standard Guide for Using Reference Material to Characterize Measurement Bias Associated with Volatile Organic Compound Emission Chamber Test
  • D7912 – 14 Standard Test Method for Resistance of Finish to Heat Aging (Finish Stability)
  • D7913/D7913M – 14 Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing
  • D7914/D7914M – 14 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
  • D7915 – 14 Standard Practice for Application of Generalized Extreme Studentized Deviate (GESD) Technique to Simultaneously Identify Multiple Outliers in a Data Set
  • D7917 – 14 Standard Practice for Inductive Wear Debris Sensors in Gearbox and Drivetrain Applications
  • D7918 – 17a Standard Test Method for Measurement of Flow Properties and Evaluation of Wear, Contaminants, and Oxidative Properties of Lubricating Grease by Die Extrusion Method and Preparation
  • D7919 – 14(2017) Standard Guide for Filter Debris Analysis (FDA) Using Manual or Automated Processes
  • D7920 – 15e1 Standard Test Method for Determination of Fuel Methanol (M99) and Methanol Fuel Blends (M10 to M99) by Gas Chromatography
  • D7922 – 14 Standard Test Method for Determination of Glycol for In-Service Engine Oils by Gas Chromatography
  • D7923 – 17a Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration
  • D7928 – 17 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
  • D7929 – 14 Standard Guide for Selection of Passive Techniques for Sampling Groundwater Monitoring Wells
  • D7931 – 17 Standard Guide for Specifying Drainage Geocomposites
  • D7932 – 17 Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments
  • D7933 – 15 Standard Test Method for Engine Coolant Stagnation in Flux-Brazed Aluminum Heat Exchangers
  • D7934/D7934M – 14 Standard Test Method for Corrosion of Cast Aluminum Alloys in Non-Aqueous Engine Coolants Under Heat-Rejecting Conditions
  • D7935/D7935M – 14 Standard Test Method for Corrosion Test for Non-Aqueous Engine Coolants in Glassware
  • D7937 – 15 Standard Test Method for In-situ Determination of Turbidity Above 1 Turbidity Unit (TU) in Surface Water
  • D7938 – 15 Standard Practice for Sampling of C-14 in Gaseous Effluents
  • D7939 – 15 Standard Test Method for Rapid Radiochemical Determination of Americium-241 in Water
  • D7940 – 14 Standard Practice for Analysis of Liquefied Natural Gas (LNG) by Fiber-Coupled Raman Spectroscopy
  • D7941/D7941M – 14 Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer
  • D7942 – 15 Standard Specification for Thermoplastic Pavement Markings in Non Snow Plow Areas
  • D7944 – 15 Standard Practice for Recovery of Emulsified Asphalt Residue Using a Vacuum Oven
  • D7945 – 16 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
  • D7946 – 14 Standard Test Method for Initial pH (i-pH)-Value of Petroleum Products
  • D7948 – 14e1 Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry
  • D7949 – 14 Standard Test Methods for Thermal Integrity Profiling of Concrete Deep Foundations
  • D7951 – 17 Standard Specification for Disproportionation (TDP) Toluene
  • D7952 – 15 Standard Test Method for Measuring Aspiration Potential of Aerosol Products
  • D7953 – 14 Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Arc Testing Method
  • D7954/D7954M – 15a Standard Practice for Moisture Surveying of Roofing and Waterproofing Systems Using Non-Destructive Electrical Impedance Scanners
  • D7956/D7956M – 16 Standard Practice for Compressive Testing of Thin Damaged Laminates Using a Sandwich Long Beam Flexure Specimen
  • D7957/D7957M – 17 Standard Specification for Solid Round Glass Fiber Reinforced Polymer Bars for Concrete Reinforcement
  • D7958/D7958M – 17 Standard Test Method for Evaluation of Performance for FRP Composite Bonded to Concrete Substrate using Beam Test
  • D7959 – 16 Standard Test Method for Chloride Content Determination of Aviation Turbine Fuels using Chloride Test Strip
  • D7960 – 17 Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Non-hydrocarbon Components
  • D7961 – 17 Standard Practice for Calibrating U-tube Density Cells over Large Ranges of Temperature and Pressure
  • D7962 – 17 Standard Practice for Determination of Minimum Immersion Depth and Assessment of Temperature Sensor Measurement Drift
  • D7963 – 14 Standard Test Method for Determination of Contamination Level of Fatty Acid Methyl Esters in Middle Distillate and Residual Fuels Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
  • D7964/D7964M – 14 Standard Test Method for Determining Activity of Fluid Catalytic Cracking (FCC) Catalysts in a Fluidized Bed
  • D7966/D7966M – 16 Standard Test Method for Resistance to Creep of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
  • D7967 – 16 Standard Test Method for Analysis of Chrome Content (as Cr2O3) in Wet Blue using Atomic Absorption
  • D7968 – 17a Standard Test Method for Determination of Polyfluorinated Compounds in Soil by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)
  • D7969 – 16 Standard Specification for Gravity Convection and Forced Ventilation Ovens
  • D7971 – 15 Standard Guide for Measuring Roundness of Glass Spheres Using a Flowing Stream Digital Image Analyzer
  • D7972 – 14 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature
  • D7973 – 14 Standard Guide for Monitoring Failure Mode Progression in Plain Bearings
  • D7974 – 15 Standard Test Method for Determination of Farnesane, Saturated Hydrocarbons, and Hexahydrofarnesol Content of Synthesized Iso-Paraffins (SIP) Fuel for Blending with Jet Fuel by Gas Chromatography
  • D7975 – 14 Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx-F(Tm°C)(Manual Expansion Field Method)
  • D7976 – 14 Standard Specification for Purified Terephthalic Acid (PTA)
  • D7977 – 14 Standard Test Methods for Polymer Content of AMS (α-Methylstyrene)
  • D7978 – 14 Standard Test Method for Determination of the Viable Aerobic Microbial Content of Fuels and Associated Water—Thixotropic Gel Culture Method
  • D7979 – 17 Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances in Water, Sludge, Influent, Effluent and Wastewater by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)
  • D7980 – 15 Standard Guide for Ion-Chromatographic Analysis of Anions in Grab Samples of Ultrapure Water (UPW) in the Semiconductor Industry
  • D7981 – 15 Standard Practice for Compaction of Prismatic Asphalt Specimens by Means of the Shear Box Compactor
  • D7982 – 15 Standard Practice for Testing of Factory Thermo-Fusion Seams for Fabricated Geomembrane Panels
  • D7983 – 17 Standard Test Method for Shrinkage of Carpet Backing Fabrics
  • D7984 – 16 Standard Test Method for Measurement of Thermal Effusivity of Fabrics Using a Modified Transient Plane Source (MTPS) Instrument
  • D7986 – 17a Standard Practice for Preparing Specimens of Hydraulic Erosion Control Products for Index Property Testing
  • D7989 – 15 Standard Practice for Demonstrating Equivalent In-Plane Lateral Seismic Performance to Wood-Frame Shear Walls Sheathed with Wood Structural Panels
  • D7990 – 15 Standard Test Method for Using Reflectance Spectra to Produce an Index of Temperature Rise in Polymeric Siding
  • D7991 – 15 Standard Test Method for Determining Aerobic Biodegradation of Plastics Buried in Sandy Marine Sediment under Controlled Laboratory Conditions
  • D7992/D7992M – 15 Standard Practice for Elevated Temperature and Moisture Conditioning of Pultruded Fiber Reinforced Polymer (FRP) Composites Used in Structural Designs
  • D7993 – 15 Standard Guide for Analyzing Complex Phthalates
  • D7994 – 17 Standard Test Method for Total Fluorine, Chlorine, and Sulfur in Liquid Petroleum Gas (LPG) by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
  • D7996 – 15 Standard Test Method for Measuring Visible Spectrum of Asphaltenes in Heavy Fuel Oils and Crude Oils by Spectroscopy in a Microfluidic Platform
  • D7997 – 15 Standard Practice for Polyurethane Raw Materials: Gel Tests for Polyurethane Non-Foam Formulations
  • D7998 – 15 Standard Test Method for Measuring the Effect of Temperature on the Cohesive Strength Development of Adhesives using Lap Shear Bonds under Tensile Loading
  • D7999 – 15 Standard Classification for Rubber Products in Natural Gas Pipeline Applications
  • D8000 – 15 Standard Practice for Flow Conditioning of Natural Gas and Liquids
  • D8001 – 16e1 Standard Test Method for Determination of Total Nitrogen, Total Kjeldahl Nitrogen by Calculation, and Total Phosphorus in Water, Wastewater by Ion Chromatography
  • D8002 – 15e1 Standard Test Method for Modified Fouling Index (MFI-0.45) of Water
  • D8003 – 15a Standard Test Method for Determination of Light Hydrocarbons and Cut Point Intervals in Live Crude Oils and Condensates by Gas Chromatography
  • D8004 – 15 Standard Test Method for Fuel Dilution of In-Service Lubricants Using Surface Acoustic Wave Sensing
  • D8005 – 15 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
  • D8006 – 16 Standard Guide for Sampling and Analysis of Residential and Commercial Water Supply Wells in Areas of Exploration and Production (E&P) Operations
  • D8007 – 15e1 Standard Test Method for Wale and Course Count of Weft Knitted Fabrics
  • D8008 – 15 Standard Practice for Representative Field Sampling of Traffic Paints
  • D8009 – 15 Standard Practice for Manual Piston Cylinder Sampling for Volatile Crude Oils, Condensates, and Liquid Petroleum Products
  • D8010 – 16 Standard Practice for Determination of Water Soluble Alkali Content in Coal
  • D8011 – 17 Standard Specification for Natural Gasoline as a Blendstock in Ethanol Fuel Blends or as a Denaturant for Fuel Ethanol
  • D8013 – 16 Standard Guide for Establishing a Recycle Program for Roof Coverings Roofing Membrane and Shingle Materials
  • D8014 – 17 Standard Guide for Selection of Membranes Used in Vegetative Roofing Systems
  • D8015 – 15 Standard Test Method for Dimensional Changes of Elastomer and Rubber Materials Due to Exposure to Gaseous Hydrocarbon Environments
  • D8016 – 15 Standard Test Method for Silica, Precipitated, Hydrated—Sears Number
  • D8018 – 15 Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Soil by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
  • D8019 – 15 Standard Test Methods for Determining the Full Section Flexural Modulus and Bending Strength of Fiber Reinforced Polymer Crossarms Assembled with Center Mount Brackets
  • D8020 – 15 Standard Test Method for Freeze-Thaw Viscosity Stability of Water-Based Inks and Ink Vehicles
  • D8022 – 15 Standard Test Method for Roll Stability of Lubricating Grease in Presence of Water (Wet Roll Stability Test)
  • D8023 – 17 Standard Specification for Round Wood Dowels (Pegs) for Use in Wood Construction
  • D8024 – 16 Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Water by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
  • D8025 – 16 Standard Test Method for Determination of Select Pesticides in Water by Multiple Reaction Monitoring Liquid Chromatography Tandem Mass Spectrometry
  • D8026 – 16 Standard Practice for Determination of Tc-99 in Water by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
  • D8027 – 17 Standard Practice for Concentration of Select Radionuclides Using MnO2 for Measurement Purposes
  • D8028 – 17 Standard Test Method for Measurement of Dissolved Gases Methane, Ethane, Ethylene, and Propane by Static Headspace Sampling and Flame Ionization Detection (GC/FID)
  • D8029 – 17a Standard Specification for Biodegradable, Low Aquatic Toxicity Hydraulic Fluids
  • D8030/D8030M – 16 Standard Practice for Sample Preparation for GCCM
  • D8031 – 16 Standard Test Method for Acid Number of Terephthalic Acid (TA) by Automatic Potentiometric Titration
  • D8032 – 16 Standard Test Method for Acid Number of Terephthalic Acid by Color-Indicator Titration
  • D8033 – 16 Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials
  • D8034/D8034M – 17 Standard Test Method for Simulated Service Corrosion Testing of Non-Aqueous Engine Coolants
  • D8036 – 16 Standard Test Method for Polyurethane Raw Materials: Determination of Dimer Ratio in Pure MDI
  • D8037/D8037M – 16 Standard Practice for Direct Push Hydraulic Logging for Profiling Variations of Permeability in Soils
  • D8038 – 16 Standard Practice for Reclamation of Recycled Aggregate Base (RAB) Material
  • D8039 – 16 Standard Specification for Heat Transfer Fluids (HTF) for Heating and Air Conditioning (HVAC) Systems
  • D8040 – 17 Standard Test Method for Corrosion Test for Heat Transfer Fluids in Glassware
  • D8041/D8041M – 16 Standard Test Method for Whole Boot Breathability (MVTR)
  • D8042 – 16 Test Method for Shrinkage Temperature of Wet Blue and Wet White
  • D8043 – 16 Standard Guide for Carbon Black—Shelf Life
  • D8044 – 16 Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures
  • D8045 – 17 Standard Test Method for Acid Number of Crude Oils and Petroleum Products by Catalytic Thermometric Titration
  • D8046 – 16a Standard Guide for Pumpability of Heat Transfer Fluids
  • D8047 – 17a Standard Test Method for Evaluation of Engine Oil Aeration Resistance in a Caterpillar C13 Direct-Injected Turbocharged Automotive Diesel Engine
  • D8048 – 17 Standard Test Method for Evaluation of Diesel Engine Oils in T-13 Diesel Engine
  • D8049 – 17 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
  • D8051/D8051M – 16 Standard Specification for Wax-Modified Asphalt Used in Roofing
  • D8052/D8052M – 17 Standard Test Method for Quantification of Air Leakage in Low-Sloped Membrane Roof Assemblies
  • D8054/D8054M – 16 Standard Test Methods for Tensile Testing of Para-Aramid Flat Yarns
  • D8055 – 17 Standard Guide for Selecting an Appropriate Electronic Thermometer for Replacing Mercury Thermometers in D04 Road and Paving Standards
  • D8056 – 16 Standard Guide for Elemental Analysis of Crude Oil
  • D8057 – 17 Standard Specification for Inlet Filters with a Rigid Frame
  • D8058 – 17e1 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
  • D8059 – 16 Standard Test Method for Rubber Compounds—Measurement of Unvulcanized Dynamic Strain Softening (Payne Effect) Using Sealed Cavity Rotorless Shear Rheometers
  • D8060 – 17 Standard Specification for 2-Bromo-3,3,3-Trifluoro-1-Propene (CF3CBr=CH2)
  • D8061 – 16 Standard Practice for Handling, Transportation, and Storage of 2-Bromo-3,3,3-Trifluoro-1-Propene (CF3CBr=CH2)
  • D8064 – 16 Standard Test Method for Elemental Analysis of Soil and Solid Waste by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams
  • D8065/D8065M – 16 Standard Classification System and Basis for Specification for Specifying Plastic Films
  • D8066/D8066M – 17 Standard Practice Unnotched Compression Testing of Polymer Matrix Composite Laminates
  • D8067/D8067M – 17 Standard Test Method for In-Plane Shear Properties of Sandwich Panels Using a Picture Frame Fixture
  • D8069 – 17 Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
  • D8070 – 16 Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay
  • D8071 – 17 Standard Test Method for Determination of Hydrocarbon Group Types and Select Hydrocarbon and Oxygenate Compounds in Automotive Spark-Ignition Engine Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
  • D8072 – 17 Standard Classification for Reporting Solids and Insoluble Water Contamination of Hydrocarbon-Based Petroleum Products When Analyzed by Imaging Instrumentation
  • D8073 – 16 Standard Test Method for Determination of Water Separation Characteristics of Aviation Turbine Fuel by Small Scale Water Separation Instrument
  • D8074 – 16 Standard Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine
  • D8075 – 16 Standard Guide for Categorization of Microstructural and Microtextural Features Observed in Optical Micrographs of Graphite
  • D8076 – 17a Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines
  • D8077/D8077M – 16 Standard Tables for Body Measurements for Mature Big Men Type, Size Range 46–64
  • D8078 – 16 Standard Test Method for Ash Content of Asphalt and Emulsified Asphalt Residues
  • D8079 – 16 Standard Practice for Preparation of Compacted Slab Asphalt Mix Samples Using a Segmented Rolling Compactor
  • D8081 – 17 Standard Guide for Theory and Principles for Obtaining Reliable and Accurate Bulk Solids Flow Data Using a Direct Shear Cell
  • D8083 – 16 Standard Test Method for Total Nitrogen, and Total Kjeldahl Nitrogen (TKN) by Calculation, in Water by High Temperature Catalytic Combustion and Chemiluminescence Detection
  • D8084 – 17 Standard Test Method for Photoelectrochemical Oxygen Demand of Freshwater Sources for Drinking Water Treatment Plants and Treated Drinking Water
  • D8085 – 17 Standard Specification for Non-Aqueous Engine Coolant for Automobile and Light-Duty Service
  • D8088 – 16 Standard Practice for Determination of the Six Major Rare Earth Elements in Fluid Catalytic Cracking Catalysts, Zeolites, Additives, and Related Materials by Inductively Coupled Plasma Optical Emission Spectroscopy
  • D8089 – 17 Standard Practice for Accelerated Heat Aging for Floor Covering Adhesives
  • D8090 – 17 Standard Test Method for Particle Size Distribution and Shape Analysis of Paints and Pigments Using Dynamic Imaging Methods
  • D8091 – 16 Standard Guide for Impregnation of Graphite with Molten Salt
  • D8092 – 17 Standard Test Method for Field Determination of Kinematic Viscosity Using a Microchannel Viscometer
  • D8093 – 16 Standard Guide for Nondestructive Evaluation of Nuclear Grade Graphite
  • D8097 – 17 Standard Test Method for Determination of Bulk Density for Specific Size Fractions of Calcined Petroleum Coke Using a Transaxial Pressure Pycnometer
  • D8098 – 17 Standard Test Method for Permanent Gases in C2 and C3 Hydrocarbon Products by Gas Chromatography and Pulse Discharge Helium Ionization Detector
  • D8099/D8099M – 17 Standard Specification for Asphalt Emulsion Pavement Sealer (Mineral Colloid or Chemically Stabilized Type)
  • D8101/D8101M – 17 Standard Test Method for Measuring the Penetration Resistance of Composite Materials to Impact by a Blunt Projectile
  • D8102 – 17 Standard Practice for Manufacturing Quality Control of Geotextiles
  • D8104 – 17 Standard Guide for Determining Coating Qualification Test Data Applicability
  • D8106 – 17 Standard Test Methods for Determining the Oil Sorption Capacity of Organophilic Clay
  • D8107 – 17 Standard Practice for Determining Sediment Pond Skimmer Flow Rate
  • D8109 – 17 Standard Guide for Waterproofing Repair of Concrete by Chemical Grout Crack Injection
  • D8110 – 17 Standard Test Method for Elemental Analysis of Distillate Products by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
  • D8111 – 17 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine
  • D8112 – 17 Standard Guide for Obtaining In-Service Samples of Turbine Operation Related Lubricating Fluid
  • D8114 – 17 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIE Spark Ignition
  • D8115 – 17 Standard Test Method for Rubber Property—Abrasion Resistance (Multi-Directional Platform Abrader)
  • D8117 – 17 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by Differential Scanning Calorimetry
  • D8120 – 17 Standard Test Method for Ferrous Debris Quantification
  • D8125 – 17 Standard Specification for Re-Refined Engine Oil Bottoms (REOB)/Vacuum Tower Asphalt Extender (VTAE)
  • D8126 – 17 Standard Test Method for Efficient Basicity Determination by Potentiometric Hydrochloric Acid Titration
  • D8127 – 17 Standard Test Method for Coupled Particulate and Elemental Analysis using X-ray Fluorescence (XRF) for In-Service Lubricants
  • D8128 – 17 Standard Guide for Monitoring Failure Mode Progression in Industrial Applications with Rolling Element Ball Type Bearings
  • D8130 – 17 Standard Test Method for Determination of Metals in Purified Terephthalic Acid (PTA) by Inductively Coupled Plasma Atomic Emission Spectrometric Method
  • D8131/D8131M – 17e1 Standard Practice for Tensile Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates
  • D8132/D8132M – 17 Standard Test Method for Determination of Prepreg Impregnation by Permeability Measurement
  • D8133 – 17 Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly(Vinyl Chloride) Plastics by Solvent Extraction—Gas Chromatography/Mass Spectrometry
  • D8135 – 17 Standard Guide for Selection of Substitute, Non-hazardous, Particulate Solid Filling Substances for Packagings Subjected to the United Nations Performance Tests
  • D8136 – 17 Standard Test Method for Determining Plastic Film Thickness and Thickness Variability Using a Non-Contact Capacitance Thickness Gauge
  • D8139 – 17 Standard Specification for Semi-Rigid, Closed-Cell Polypropylene Foam, Preformed Expansion Joint Fillers for Concrete Paving and Structural Construction
  • D8141 – 17 Standard Guide for Selecting Volatile Organic Compounds (VOCs) and Semi-Volatile Organic Compounds (SVOCs) Emission Testing Methods to Determine Emission Parameters for Modeling of Indoor Environments
  • D8142 – 17 Standard Test Method for Determining Chemical Emissions from Spray Polyurethane Foam (SPF) Insulation using Micro-Scale Environmental Test Chambers
  • D8143 – 17 Standard Test Method for Determination of the EU-8 List of PAH Compounds in Carbon Black
  • D8148 – 17 Standard Test Method for Spectroscopic Determination of Haze in Fuels
  • D8150 – 17 Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography
  • D8154 – 17 Standard Test Methods for 1H-NMR Determination of Ketone-Ethylene-Ester and Polyvinyl Chloride Contents in KEE-PVC Roofing Fabrics
  • D8155 – 17 Standard Practice for Shake Extraction of Solid Mining and Metallurgical Processing Waste with Water
  • D8163 – 17 Standard Test Method for Determination of Strength of Colorants and Bases for Architectural, Marine, Maintenance, Commercial, and Industrial Coatings
  • Leave a Reply

    Your email address will not be published. Required fields are marked *